Definitive Technology STS User manual

Brand: Definitive Technology

Model: STS

Category: Subwoofers

Type: User manual

Thank You

Thank you for choosing the Deﬁnitive Technology

Mythos STS SuperTower Loudspeaker System. The Mythos

STS is a unique speaker which includes a built-in powered

subwoofer system with a high-power digital ampliﬁer. This

extraordinary speaker truly revolutionize the state-of-the-art

in music and home theater loudspeaker technology and

performance. You chose wisely.

Our engineers have spent many years in developing this

product. In order to ensure that you experience the ﬁnest

performance possible, we encourage you to take a moment

to fully read this owner’s manual and familiarize yourself

with the proper installation and set-up procedures for your

Mythos STS speakers.

Mythos STS

Mythos STS SuperTower

Loudspeaker with Built-In Powered

Subwoofer

Owner’s Manual

CAUTION! To reduce the risk of electric shock and ﬁre, do not remove the cover or back plate of this

device. There are no user serviceable parts inside. Please refer all servicing to licensed service technicians.

Avis: Risque de choc electricque, ne pas ouvrir.

CAUTION! The international symbol of a lightning bolt inside a triangle is intended to alert the user to

uninsulated “dangerous voltage” within the device’s enclosure. The international symbol of an exclamation

point inside a triangle is intended to alert the user to the presence of important operating, maintenance and

servicing information in the manual accompanying the device.

CAUTION! To prevent electrical shock, match wide blade of plug to wide slot, fully insert. Attention: Pour

eviter les chocs electriques, introduire la lame la plus large de la ﬁche dans la borne correspondante de la

prise et pousser jusqu'au fond.

CAUTION! To reduce the risk of electrical shock, do not expose this equipment to rain or moisture.

1. Read Instructions—All safety and operating instructions should be read before operating the device.

2. Retain Instructions—The safety and operating instructions should be retained for future reference.

3. Heed Warnings—All warnings on the device and in the operating instructions should be adhered to.

4. Follow Instructions—All operating and safety instructions should be followed.

5. Water & Moisture—The device should never be used in, on or near water for risk of fatal shock.

6. Carts & Stands—The device should only be used on carts or stands recommended by the manufacturer.

7. Wall & Ceiling Mounting—The device should be mounted on a wall or ceiling only as recommended

by the manufacturer.

8. Ventilation—The device should always be located in such a way that it maintains proper ventilation.

It should never be placed in a built-in installation or anywhere that may impede the ﬂow of air through

its heat sink.

9. Heat—Never locate the device near heat sources such as radiators, ﬂoor registers, stoves or other

heat-generating devices.

10. Power Supply—The device should only be connected to a power supply of the type described in the

operating instructions or as marked on the device.

11. Power Cord Protection—Power cables should be routed so they are not likely to be stepped on or

crushed by items placed on them or against them. Special attention should be paid to areas where the

plug enters a socket or fused strip and where the cord exits the device.

12. Cleaning—The device should be cleaned in accordance with manufacturer’s instructions.

13. Periods Of Non-Use—The device should be unplugged when not being used for extended periods.

14. Dangerous Entry—Care should be taken that no foreign objects or liquids fall or are spilled inside

the device.

15. Damage Requiring Service—The device should be serviced by licensed technicians when:

• The plug or power supply cord has been damaged.

• Objects have fallen or liquid has spilled inside the device.

• The device has been exposed to moisture.

• The device does not appear to be operating properly or exhibits a marked change in performance.

• The device has been dropped or the cabinet becomes damaged.

16. Service—The device should always be serviced by licensed technicians. Only replacement parts

speciﬁed by the manufacturer should be used. The use of unauthorized substitutions may result in ﬁ

re,

shock, or other hazards.

CAUTION

ISK OF ELECTRIC SHOCK

DO NOT OPEN

Safety Precautions

Tools required: 4mm (or

") Allen wrench (also called Hex Key driver) included

in carton

Parts required: Polished Granite Base, Cable Clip for AC Cord, four Allen head

bolts, eights plastic washers. All required parts are included in the

product carton.

Instructions:

1. Carefully lay the Mythos STS on its side. Lift the base of the speaker about six

inches and support it with a soft padded object, such as a pillow. Do NOT

support the speaker with a hard object, as you might dent or scratch the

aluminum ﬁnish.

2. Place one plastic washer on each bolt.

3. Insert the bolts into the granite base from the bottom (the same side that the

levelling feet are attached).

Base Installation Instructions

Safety Precautions Speciﬁc to Mythos STS

The cautionary marking label is located on the bottom of the speaker,

visible through an opening in the granite base.

Power Supply

1. The fuse and power disconnect device are located on the bottom of the

speaker, accessible through a hole in the granite base.

2. The disconnect device is the power cord, detachable at either the speaker

or the wall.

3. The power cord must be disconnected from the speaker before servicing.

Please Inspect For Shipping Damage

Each loudspeaker leaves our plant in perfect condition. Any visible or

concealed damage most likely occurred in handling after it left our plant and

should be reported at once to your Deﬁnitive dealer or the delivery company that

delivered your loudspeaker. Please unpack your system carefully. Save all cartons

and packing materials in case you move or need to ship your system. Record the

serial number found on the back of the Mythos STS in the appropriate place on

your warranty card, answer all questions and send it in.

VERY IMPORTANT: Accessories

Various parts and accessories that you will need to assemble your Mythos STS

are in the carton but are easy to overlook. Open both ends of the shipping carton.

Carefully examine the contents of the shipping carton and packing material to ﬁ

the plastic bags with accessories.

Unpacking Your Mythos STS

4. Place another plastic washer on each bolt

so the washer is against the granite.

5. Finger tighten all four bolts into the

threaded holes on the bottom of the

Mythos. If this has been done correctly,

washers will be between the metal

surface of the Mythos STS, the granite,

and the heads of the bolts.

6. GENTLY tighten each bolt with the

Allen wrench. Do NOT overtighten

or you may crack the granite.

7. Attach the AC cord through the hole

at the bottom of the granite base.

8. Note the label showing the height

adjustment ring and locking collar on

the levelling feet. Carefully return the

speaker to the upright position and

adjust the feet to level the speaker.

Installing Cable Clip for AC Cord

The cable clip supplied in the accessories bag holds the power cable in place to

prevent accidental disconnection of the cable from the inlet socket. T

o use, peel

backing and apply to bottom of granite base half-way between center opening and

back of the base, slightly of

f to one side of the rear foot, as shown in the diagram.

After plugging supplied power cable into the inlet socket, it may then be pressed

into the opening in the cable clip to secure it in place.

SUGGESTED CLIP LOCATION

SELF-ADHESIVE POWER CABLE

RESTRAINING CLIP FOR MYTHOS STS

Positioning the Mythos Speakers in Your Room

Your new Mythos speakers are very ﬂexible in terms of positioning and

placement options and they will produce excellent sound in almost any location.

Following a few simple guidelines will, however, optimize their performance for

the more critical listener. Although the following recommendations will usually

yield the best results, all rooms and listening sets-ups are different, so do not be

afraid to experiment with the speaker placement. Whatever sounds best to you

is correct.

Positioning Mythos STS as

Left/Right Main Speakers

For best results create an equilateral

triangle between the speakers and the

listening position as shown in the

illustration. Angle the speakers toward

the center of the listening position for

brighter, clearer sound with a sharper

focus and a more solid central image

(recommended). Pointing the speakers

straight forward, parallel with each

other, will result in a warmer less

sharply focused sound.

The Mythos STSs are magnetically shielded for safe placement near TV or

video monitors. If you notice video distortion or discoloration, immediately move

the speakers farther away from the video display. To get the best possible imaging

and most even tonal response avoid placing the speakers less than 3 feet (1 Meter)

from back and side walls.

IInstalling Leveling Feet and Spikes

We have provided leveling feet and metal spikes with your Mythos STSs; they

are in the same bag as this manual. The plastic tips are for hard ﬂoor surfaces such

as tile and wood while the metal spikes are for use on carpeted ﬂoors. Be careful

when using spikes as they may cause damage to wooden or other ﬂoors which are

susceptible to being scratched. Deﬁnitive Technology is not responsible for ﬂoor

damage which may result from the use of spikes.

Screw the leveling feet into the ﬁve threaded inserts on the bottom of the

base. If you plan on using spikes, it would be best to experiment with speaker

positioning ﬁrst, then add the spikes once you are sure you’ve determined the

speakers’ permanent position. To install the carpet spikes, unscrew the non-

marking tips from the centers of the ﬁve leveling feet and screw the spikes in

their places. Then, with the help of another person, lift the speaker upright and

lower it to the desired location; push down on the top of the speaker to force the

spikes through the carpet and make contact with the ﬂoor beneath.

Once you have positioned the speakers, wiggle them to see if they are stable and

level. Adjust the height of the leveling feet/spikes accordingly for best stability.

≥3' (1M)

Connecting Mythos STS to a Two-Channel System

Your Mythos STSs have a set of speaker level (high level) 5-way binding posts

plus an LFE input. If you are using your Mythos STS in a two channel system you

only need connect to the high-level binding posts. To start, strip

inch (12.7mm)

of insulation from each of the two conductors of the speaker wire to expose the bare

metal and twist each of the individual conductors into single unfrayed strands. Note

that one of the terminals on the rear of each speaker is marked with red band (+)

and the other is marked

with black band (-).

Make certain that you

connect the wire from

the red (+) terminal of

your ampliﬁer or

receiver to the red (+)

terminal on your

speaker and the wire

from the black (-)

terminal of your

ampliﬁer or receiver

to the black (-) terminal

on your speaker.

Most speaker wire has

Connecting Your Loudspeakers

Positioning Mythos STS as Rear/Side Surrounds

When used as rear or side surround speakers, Mythos STSs may be located on

the side or behind the listeners. When used on the sides, take care never to locate

the speakers forward of the listeners (ﬁgure A). When the side/rear speakers are

close to the listening position, do not aim the speakers at the listeners. If positioned

several feet behind the listener, experiment with speaker aiming (ﬁgure B).

AMPLIFIER OR

RECEIVER

some indicator (such as color-coding, ribbing or writing) on one of the two

conductors to help you maintain consistency. It is essential to connect both

speakers to the ampliﬁer in the same way (in phase). If you experience a lack

of bass, it is likely that one speaker is out of phase with the other and needs to be

rewired paying closer attention to connect positive to positive; negative to negative

on both channels.

To connect wire to the binding post [see ﬁgure above], unscrew the hex nut

and insert the bare wire into the hole near the base of the binding post. Do not

insert the insulated part of the wire into the hole as this will not give you a good

connection. Twist the hex nut back down the binding post until it ﬁrmly meets

the wire. Do not over tighten.

Connecting Mythos STS to a Multi-Channel

Home Theater System

Your Mythos STSs have a set of speaker level (high level) 5-way binding post

speaker inputs to feed in the left and right channel signals plus an LFE input to

separately feed the discrete “Low Frequency Effects” channel into each subwoofer.

Unlike a conventional system, where the subwoofer is driven only by an LFE

subwoofer signal, the Mythos STSs are much more sophisticated and can play

by the left and right channel bass signal as well as the LFE signal. For optimum

performance, please fully read and closely follow the directions in this manual.

To start, strip

inch (12.7mm) of insulation from each of the two conductors

of the speaker wire to expose the bare metal and twist each of the individual

conductors into single unfrayed strands. Connect the left front channel red (+)

terminal of your receiver or ampliﬁer to the red marked (+) terminal of your left

loudspeaker and the left front channel black marked (-) terminal of your receiver or

ampliﬁer to the black (-) terminal of your left loudspeaker. Connect the right

channel main/front channel red (+) terminal of your ampliﬁer or receiver to the red

(+) terminal of your right loudspeaker and the black (-) terminal of the right

main/front channel of your receiver or ampliﬁer to the black (-) terminal of your

right loudspeaker. Most speaker wire has some indicator (such as color-coding,

ribbing or writing) on one of the two conductors to help you maintain consistency. It

is essential to connect both speakers to the ampliﬁer in the same way (in phase). If

you experience a lack of bass, it is likely that one speaker is out of phase with the

other and needs to be rewired paying closer attention to connect positive to positive;

negative to negative on both channels.

Connecting the Low Frequency Effects (LFE) Channel

Connect a “Y” connector (available from your dealer) from the LFE output on

your receiver or processor to feed two line level cables, connecting one to the LFE

input on your left Mythos STS and the other to the LFE input on your right speaker.

When using the LFE inputs, set your receiver’s or processor’s Speaker Set Up (bass

management) as Front = Large, Subwoofer = Yes (On).

Setting Low-Frequency Balance When Using LFE Input

In the receiver’s or processor’s speaker level menu be sure to set the subwoofer

volume to match that of the other channels in the system. Consult your receiver’s

manual for speciﬁc instructions on setting speaker levels.

Speaker Wire Only Multi-Channel System Hook-Up

If you do not want to complicate your system hook up by connecting to the

Mythos STS’ LFE inputs, simply connect to the speakers’ high-level input binding

posts as described above and set your receiver

’

s or processor’s Speaker Set Up

(bass management) as Front = Lar

ge, Subwoofer = No (Of

f). All of the front

channel as well as the LFE bass will go to the Mythos STS.

Using Multi-Channel SACD or DVD-Audio with

your Mythos STS

Because of the nature of their bass management systems, a multi-channel

SACD player or DVD-Audio player (or any other format that requires using

6-channel interconnects) requires the use of an LFE connection between your

receiver or processor and your Mythos STS. If you are using one of these players,

please use the connection method outlined in the “Connecting the Low Frequency

Effects (LFE) Channel” section.

Surround Channel Hook-Up

If you are using the Mythos STS as side/rear surround speakers, hook up the

left surround red (+) terminal of your receiver or ampliﬁer to the red (+) terminal

of your left surround speaker and the left surround black (-) terminal of your

receiver or ampliﬁer to the black(-) terminal of your left surround speaker.

Connect the right surround red (+) terminal of your ampliﬁer or receiver to the

VERY IMPORTANT: Setting Bass Management and

Channel Balance

Dolby Digital and DTS multi-channel systems have critical channel

balance and bass management procedures which must be followed if the

system is to perform properly. We have spoken with many users with system

sound problems which could be clearly traced back to improper system

balance and bass management set-up. Consult your receiver’s or processor’s

manual to learn how to access your system set up menus. If you have

connected the LFE output of your receiver or processor to the LFE input of

the Mythos STS, using the Speaker Set Up (or bass management) menu set

the front left speakers as “Large” and subwoofer as “Yes.” If you have

connected the speakers using only speaker wire, set the front speakers as

“Large” and subwoofer as “No.”

If you have a Deﬁnitive center channel with a built-in powered subwoofer

or other full range center channel, set your receiver’s Speaker Set Up center

channel setting to “Large” (although you should experiment with this to see

what sounds best in your speciﬁc system). For almost every other center

channel speaker set it as “Small.” If you are using large rear surround

speakers with very extended low frequency response such as a large

Deﬁnitive ﬂoor-standing system or one with a built-in powered subwoofer,

set the rear channels of your decoder’s bass management system to “Large.”

If you are using medium to small-sized center and surr

ound speakers, set

them to “Small.”

Use the Speaker Level menu in your receiver or processor to set each

channel in the system to the same volume level. While you can get decent

results doing this by ear, it is best to use an inexpensive Sound Pressure

(SPL) meter to get perfect channel to channel balance. Some new receivers

and processors have Auto Set Up functions that use a supplied microphone

to set levels.

red (+) terminal of your right surround loudspeaker and the black (-) terminal of

the right surround channel of your receiver or ampliﬁer to the black (-) terminal

of your right surround loudspeaker. Most speaker wire has some indicator (such

as color-coding, ribbing or writing) on one of the two conductors to help you

maintain consistency. It is essential to connect both speakers to the ampliﬁer in

the same way (in phase). If you experience a lack of bass, it is likely that one

speaker is out of phase with the other and needs to be rewired paying closer

attention to connect positive to positive; negative to negative on both channels.

Set the receiver’s or processor’s Speaker Set-Up menu as Surround = Large.

Your Mythos STSs contain a built-in, active powered subwoofer section as well

as an electronic crossover and must be plugged into an electrical socket of the

appropriate voltage (as indicated on the back of your unit) using the electrical cord

which you have attached to the bottom of the speaker. The Mythos STS has a

special circuit which automatically turns the powered subwoofer section on when

a signal is fed to the loudspeaker and does not require an on-off switch. Please note

that if you hear a pop from the speaker when the amp powers up, this is normal.

The LED on the back panel will light up when a signal is sensed and the ampliﬁer

turns on. After the cessation of a signal, it may take up to an hour for the ampliﬁer

to actually turn off. In some instances, because of stray radio signals (RF) in your

area, the LEDs may not turn off. However, this is nothing to be concerned about

as the ampliﬁers draw almost no power when they are idling.

Setting Your Speakers’ Low-Frequency Level Control

Your Mythos STSs have bass level controls which allow you to tune the output

level of the powered subwoofers to match your room and personal listening

preferences. Please note that there are no controls to vary the crossover points

or phase because these have been factory calibrated and set to provide perfect

blending (a major performance beneﬁt of this innovative product). We suggest

beginning with the level control set at approximately 1 o’clock.

Normally the level control of the left speaker will be set the same as the level

control of the right speaker. However, these controls can also be set differently on

the two speakers in order to allow you to vary the response of left and right speakers

to compensate asymmetrical positioning of the speakers in your room (i.e., when

one is closer to a side wall or corner, etc.). This is a useful feature which allows you

much greater ﬂexibility in loudspeaker placement, as well as the ability to

compensate for what could otherwise be difﬁcult placement situations.

Powering the Active Subwoofer

Setting Low-Frequency Level When Using Separate LFE Input

If your Mythos STS built-in subwoofers are connected with the LFE input,

ﬁrst set the bass volume level on your Mythos STSs to sound balanced when

listening to music in stereo. Then use your receiver or processor

’s Speaker Level

(or Channel Balance) menu to set the subwoofer level to at least equal volume with

the other speakers in the system. If you want more bass output on movies, you are

better off raising the .1 channel subwoofer level in the Speaker Level menu than

turning up the subwoofer volume control on the speakers.

Your Mythos STSs should sound good right out of the box; however

, an

extended pre-conditioning (break-in) period of 40-60 hours or more of normal

playing is required to reach full performance capability

. Pre-conditioning allows

the driver suspensions to loosen and results in fuller bass, clearer more open

midrange and smoother high frequency reproduction.

Although the built-in subwoofers in your Mythos STSs deliver superb low

frequency response and are all that are required for amazing performance, some

listeners with large rooms may want to add an additional powered subwoofer to

their system. If you choose to do so, we strongly suggest using a Deﬁnitive

SuperCube subwoofer in order to achieve the highest level of sound quality

possible. In this case connect the Mythos STS with the speaker wire only method

and connect the LFE output to the separate subwoofer. Your receiver or processor’s

Speaker Set Up bass management system should be set to Front Speakers =

“Large” and Subwoofer = “Yes.”

We strongly suggest that you use matching Deﬁnitive center channel and

rear/surround speakers to complete your Deﬁnitive home theater system. Please

note that you can use Deﬁnitive Mythos STS SuperTowers as rear or side surround

speakers with excellent results for both music and movies.

Speaker Pre-Conditioning (Break-in)

To prevent accidental damage to the subwoofers built into your Mythos

STSs from overdriving the system, the subwoofers feature an internal

overload protection circuit, which will turn the subwoofers off or down

when overdriven or overheated and will then resume normal operation

after a few minutes.

Using your Mythos STS with an

Additional Subwoofer

Complete Home Theater Systems

Audible distortion when the speakers are playing at loud levels is caused

by driving (turning up) your receiver or ampliﬁer louder than it or the

speakers are capable of playing. Most receivers and ampliﬁers put out

their full-rated power well before the volume control is turned all the way

up, so the position of the volume control is a poor indicator its power limit.

If your speakers distort when you play them loud, turn the volume down!

Setting Bass and Treble Controls on

Your Receiver or Ampliﬁer

Normally we recommend that you set the “Bass” and “Treble” controls on ﬂat

or 0 dB. This will give you the most linear and natural sound. If you want more

bass, raise the subwoofer’s “Level” control on your Mythos STS, keeping in mind

that even a little turn of the knob can make a big difference in the sound. Also, if

your ampliﬁer or receiver has a graphic equalizer, we recommend that you leave it

ﬂat. The reason for this is that we have spoken with many consumers about what

they thought were improperly sounding speakers when, in fact the problem was

misadjusted tone controls. When in doubt, leave them ﬂat; this almost always

sounds the best.

If you experience any difﬁculties with your Mythos STS loudspeakers, try the

suggestions below. If you still have problems, contact your Deﬁnitive Technology

Authorized Dealer for assistance.

1. Make sure all your system interconnects and power cords are solidly in place.

2. Should you hear hum or noise coming from your speakers, try plugging the

speakers' power cords into a different AC circuit than your ampliﬁer.

3. The system has sophisticated internal protection circuitry. If for some reason

the protection circuitry trips, turn off your system and wait ﬁve minutes

before trying the system again. If the speakers’ built-in ampliﬁer should

overheat, the system will turn off until the ampliﬁer cools down and resets.

4. Check to be sure that your power cord has not been damaged.

5. Check that no foreign objects or liquid has entered the speaker cabinet.

6. If you cannot get the subwoofer driver to turn on or if no sound comes out

and you are sure the system is set up properly, please bring the loudspeaker

to your Deﬁnitive Technology Authorized Dealer for assistance. Call First.

Troubleshooting

Service and warranty work on your Deﬁnitive loudspeakers will normally be

performed by your local Deﬁnitive Technology dealer. If, however, you wish to

return the speaker to us, please contact us ﬁrst, describing the problem and

requesting authorization as well as the location of the nearest factory service

center.

Please note that the address given in this booklet is the address of our

ofﬁces only. Under no circumstances should loudspeakers be shipped to our

ofﬁces or returned without contacting us ﬁrst and obtaining return

authorization.

Deﬁnitive Technology Ofﬁces

11433 Cronridge Drive,

Owings Mills, Maryland 21117

Phone: (800) 228-7148 (US & Canada),

01 (410) 363-7148 (all other countries)

Service

It is our pleasure to offer assistance if you have any questions regarding your

Mythos STS or their set-up. Please contact your nearest Deﬁnitive Technology

dealer or call us directly at (800) 228-7148 (US & Canada), 01 (410) 363-7148

(all other countries) or e-mail info@deﬁ

nitivetech.com.

Technical Assistance

Mythos STS

Dimensions: 5

" W x 8

" D x 47

" H

(height includes granite base & leveling feet/spikes)

Base Dimensions: 10

" W x 14" D

Frequency Response: 16 Hz – 30 kHz

Efﬁciency: 93 dB

Nominal Impedance:

4 – 8 ohms

Driver Complement:

Two 4

" high deﬁnition cast-magnesium basket

midrange

drivers. One 1" (25 mm) pure aluminum dome tweeter.

One 5" x 10" long-throw racetrack subwoofer coupled

to two 5" x 10" racetrack radiators.

Rec.

Assoc. Ampliﬁcation: 20 – 250 Watt/channel

Built-In Subwoofer

Power Ampliﬁer

: 300 Watt Digitally-Coupled Class D ampliﬁer

Fuse Size:

3.25-amp 250-volt slow-blow fuse for 110-volt version and

2-amp 250-volt slow-blow fuse for the 240-volt version

Speciﬁcations subject to change without notice.

Speciﬁcations

Visit us at www.deﬁnitivetech.com.

Deﬁnitive Technology warrants to the original retail purchaser only that this Deﬁnitive

Technology Loudspeaker Product (the “Product”) will be free from defects in materials

and workmanship for a period of ﬁve (5) years covering the drivers and cabinets, and

three (3) years for the electronic components from the date of the original purchase from

a Deﬁnitive Technology Authorized Dealer. However, this warranty will automatically

terminate prior to the expiration of ﬁve (5) years for the drivers and cabinets and three (3)

years for the electronic components if the original retail purchaser sells or otherwise

transfers the Product to any other party. The original retail purchaser shall hereinafter be

referred to as “you.” Defective Products must be shipped, together with proof of date of

purchase, prepaid insured to the Authorized Dealer from whom you purchased the

Product, or to the nearest factory service center. Product(s) must be shipped in the

original shipping container or its equivalent; in any case the risk of loss or damage in

transit is to be borne by you. If, upon examination at the Factory or a Deﬁnitive

Technology Authorized Dealer, it is determined that the unit was defective in materials or

workmanship at any time during this Warranty period, Deﬁnitive Technology or the

Deﬁnitive Technology Authorized Dealer will, at its option, repair or replace this Product

at no additional charge, except as set forth below. All replaced parts and Product(s)

become the property of Deﬁnitive Technology. Product(s) replaced or repaired under this

Warranty will be returned to you, within a reasonable time, freight collect.

This Warranty does not include service or parts to repair damage caused by accident,

misuse, abuse, negligence, inadequate packing or shipping procedures, commercial use,

voltage in excess of the rated maximum of the unit, cosmetic appearance of cabinetry

not directly attributable to defects in materials or workmanship, or service, or repair or

modiﬁcation of the Product which has not been authorized by Deﬁnitive Technology.

Deﬁnitive Technology makes no Warranty with respect to its Products purchased from

dealers or outlets other than Deﬁnitive Technology Authorized Dealers. This Warranty

is in lieu of all other expressed Warranties. If this Product is defective in material or

workmanship as warranted above, your sole remedy shall be repair or replacement as

provided above. In no event will Deﬁnitive Technology be liable to you for any

incidental or consequential damages arising out of the use or inability to use the

Product, even if Deﬁnitive Technology or a Deﬁnitive Technology Authorized Dealer

has been advised of the possibility of such damages, or for any claim by any other party.

Some states do not allow the exclusion or limitation of consequential damages, so the

above limitation may not apply to you.

All implied warranties on the Product are limited to the duration of this expressed

Warranty. Some states do not allow limitation on how long an implied Warranty lasts,

so the above limitations may not apply to you. This Warranty gives you speciﬁc legal

rights, and you also may have other rights which vary from state to state.

Limited Warranty:

5-Years for Drivers and Cabinets,

3-Years for Electronic Components

This product complies with the essential

requirements of the EMC directive 89/336/EEC.

EDAT012609

Definitive Technology STS User manual

Brand: Definitive Technology

Model: STS

Category: Subwoofers

Type: User manual

Download PDF

report

Definitive Technology STS User manual

Definitive Technology STS User manual

Related papers

Other documents