Manhattan Bluetooth Stereo Headset User manual

Brand: Manhattan

Model: Bluetooth Stereo Headset

Category: Mobile headsets

Type: User manual

This manual is also suitable for

175944

Manhattan 175944 is a Bluetooth Stereo Headset that offers wireless listening for Bluetooth-enabled audio sources. With its comfortable, behind-the-neck design and built-in microphone, you can enjoy clear voice and stereo reception without missing a call while listening to music.

You can add wireless convenience to notebook and desktop PCs, MP3 players, Skype, and other Bluetooth-enabled audio sources. The quick recharge and power sleep mode provide up to eight hours of use, and the easy set-up requires no drivers.

MAN-175944-UM-1106-03

Bluetooth

Stereo headSet

uSer MaNual

MODEL 175944

Thank you for purchasing the MANHATTAN

Bluetooth Stereo Headset, Model 175944.

Providing wireless listening for Bluetooth-enabled audio sources, the Bluetooth Stereo Headset

offers the following features and beneﬁts.

• EnjoyclearvoiceandstereoreceptionwithmostBluetooth-enableddevices–nevermissa

 callwhilelisteningtomusic.

• AddwirelessconveniencetonotebookanddesktopPCs,MP3players,Skypeandother

Bluetooth-enabled audio sources.

• Comfortable,behind-the-neckdesignwithbuilt-inmicrophonefoldsfortravelandstorage.

• ControlBluetoothmobilephoneandaudiofunctionsdirectlyfromtheheadset.

• Quickrechargeandpowersleepmodeprovideuptoeighthoursofuse;easyset-up—no

drivers required.

• LifetimeWarranty

Package contents:

•BluetoothStereoHeadset

•USBrechargingcable

•Travelbag

•Usermanual

operatioN

Charging the Battery

The battery provides power for eight hours. To recharge the battery, plug the USB cable into the

DCjackontheheadsetandconnectittoyourPC.NOTE: Before the ﬁrst use of the headset,

chargethebatteryfullyfor10hours.Thereafter,rechargingtakesapproximately90minutes.

Turning the Headset On / Controls

To turn the headset on, press and hold the Power button

(about 3 seconds) until the LED lights blue. To turn it off,

press and hold the Power button (about 3 seconds) until

the Power LED turns off.

Power Button/LED:

•Solidblue:Powerison.

•Flashingblue:Connectedtoanotherdevice.

•Solidred:Thebatteryischarging.(TheredLEDturnsoffwhenthebatteryischarged.)

•Flashingred:Thebatteryislow.RechargebeforetheLEDturnsoff.

Volume +/–:Toggletoraise/lowerthevolumeincrementally.

Stop/Play:Presstostop/mute;pressagaintoplay/resume.(Buttonisbetweenvolumecontrols.)

Back/Next:Slidetogobackormoveforwardonaconnectedsongtracklist.

Microphone

jack

Stop/Play

Power

button/

LED

Volume

+/–

Back/

Using the Headset with Your Bluetooth-Enabled Mobile Phone

1.EnableBluetoothonyourphone(refertothephone’susermanual).

2.Turnontheheadset.Checkthatnootherdeviceconnectswiththeheadsetbyconrming

that the Power/Link LED is not ﬂashing.

3.Inthephone’sBluetoothmenu,select"Devices."

4.Select"StereoHeadset."

5. Enter the PIN code “0000.”

Toansweracall,pushthePowerbutton.Toendacall,simplypushthePowerbuttonagain.

Using IVT BlueSoleil

™

TouseIVT’sBlueSoleil(applicationsoftwarethatenables/supportsmanyBluetoothfeatures),

rstconnecttheBluetoothStereoHeadsettoyourcomputer.EnsurethatBlueSoleilisrunningon

yourcomputer,thenturnonyourheadset.

NOTE:IVTBlueSoleilsoftwareisnotincludedwithyourBluetoothheadset.Refertoa

BlueSoleiluser’sguideorIVT’sWebsite(http://www.ivtcorporation.com)forfurtherdetailsand

support.

Using Proﬁles

To use the Headset Proﬁle with Skype

™

1. Double-click the BlueSoleil icon in the task tray.

2.PressF5tosearchforBluetoothdevices.

3.Double-clickthe"MM-BTSH9"headseticon.

4.Click"BluetoothHeadsetService"tocreatea

connection shortcut.

Bluetooth Headset Service

Bluetooth AV Service

MM-BTSH9

To use the AV Proﬁle to play audio:

1. Double-click the BlueSoleil icon in the task tray.

2.PressF5tosearchforBluetoothdevices.

3.Double-clickthe"MM-BTSH9"headseticon.

4.Click"BluetoothAVService"tocreatea

connection shortcut.

Conﬁguring the audio output

1.GototheControlPaneland

 double-clickthe"Soundand

 AudioDevices"icon.

2.WhentheSoundsandAudio

Devices Properties screen

displays, select the Audio tab.

3.Inthe"Soundplayback"panel,

 changethe"Defaultdevice"to

 "BluetoothAVAudio."

4.Inthe"Soundrecording"panel,

 changethe"Defaultdevice"to

 "BluetoothAVAudio."

5.Click"OK."

Control Panel

Bluetooth AV Audio

Sounds and Audio Devices Properties

Audio

Sound playback

Sound recording

Using WidComm

Bluetooth Software

TouseWidCommBluetoothsoftware,rst

connect the Bluetooth Stereo Headset to

yourcomputer.EnsurethatWidCommis

runningonyourcomputer,thenturnonyour

headset.

NOTE:WidCommBluetoothsoftwareisnot

included with your Bluetooth headset.

To use the AV Proﬁle to play audio:

1.Double-clicktheWidCommiconinthe

task tray.

2.Click"Searchfordevicesinrange."

3.Double-clickthe"StereoHeadset"icon.

4.Click"AudioSinkonStereoHeadset"to

create a connection shortcut.

My Bluetooth Places\Entire Bluetooth Neighborhood

Audio Sink on Stereo Headset

Not Connected

Audio Sink on Stereo

Headset

Connected

Conﬁguring WidComm

Audio Output

1.GototheControlPanel

and double-click the

 "SoundandAudio

 Devices"icon.

2.WhentheSoundsand

Audio Devices Properties

screen displays, select

the Audio tab.

3.Inthe"Soundplayback"

 panel,changethe"Default

 device"to"Bluetooth

 HighQualityAudio."

4.Inthe"Soundrecording"

 panel,changethe"Default

 device"to"Bluetooth

 HighQualityAudio."

5.Click"OK."

Bluetooth High Quality Audio

Control Panel

Sounds and Audio Devices Properties

Sound playback

Sound recording

Audio

Conﬁguring for Use with Computers

Bluetooth Settings

1.Onthecomputer,gotoStart➞ Programs➞

Bluetooth ➞ Bluetooth Settings.

2. On the headset, hold down the Power button

until the Power LED lights and stays blue.

3. On the Bluetooth Settings screen (right), click

 “NewConnection.”

4.WhentheAddNewConnectionWizard

 screendisplays(left),select“CustomMode”

 andclick"Next."

Custom Mode

Add New Connection Wizard

New

Connection

Next >

6.WhentheBluetoothManager–Bluetooth

Security screen displays, enter “0000” in the

 "BluetoothPasskey(PIN)"texteld;click“OK.”

5.Whenthe“Selectadevice”Wizardscreen

displays, highlight “Stereo Headset” in the

 "Bluetoothdevice"window;click“Next.”

Device Name

Stereo Headset

Bluetooth Passkey (PIN)

Bluetooth Manager - Bluetooth Security

Add New Connection Wizard

Bluetooth device

Next >

0000

Select a device

Audio Sink

Create a shortcut on the desktop

Stereo Headset

7. Whenthe“Selectaservice”Wizardscreen

displays (right), select “Audio Sink” in the

 "Serviceselection"window;click

“Next.”

8.Whenthe“Enteranameandselectanicon”

 Wizardscreendisplays(left),“StereoHeadset”

should appear as the default in the

 “ConnectionName”eldinthe"Setting

 information"panel.Select“Createashortcuton

 thedesktop”;click“Next.”

Add New Connection Wizard

Next >

Select a service

Enter a name and select an icon

Next >

Setting information

Service selection

Connection Name

Stereo

Headset

9. To enable the Bluetooth Headset, double-click the

Stereo Headset icon (or use the desktop shortcut

shown below).

Bluetooth Settings

trouBleShootiNG

If the Bluetooth Stereo Headset does not work, try the following:

•Ensurethatallconnectingdevicesaresufcientlycharged.

•Turnoffalldevicesandthenturnthemonintheordershowninthismanual.

•Ensuredevicesarewithintheeffective10-meterrange.

SpecificatioNS

General:

•Bluetoothstandards:V1.2,Class2;A2DPprole(AVprole);headsetandhands-freeprole

•Frequencyrange:2402–2480MHz

•Compatibility:supportsBluetoothA2DP(AVprole),AVRCP,HSandHFproles

•Effectiverange:10m(32ft.)

Headset:

•Audiosamplerate:48kHz(streamingformat)

•S/N:>85dB

•Frequencyresponse:20Hz–22kHz

•Output:20mW

•Batterytype:built-inrechargeablelithium-polymerbattery

•Chargingtime:1.5hours

•Playingtime:upto8hours

•Standbytime:upto240hours

•USBchargingcable:1m(42in.)

•Dimensions,folded:98x72x75mm(3.8x2.8x2.9in.)

•Dimensions,unfolded:180x140x60mm(7x5.5x2.3in.)

•Weight:62.3g(2.2oz.)

Mobile phone compatibility (check other phones for interoperability):

•BlackBerry7100t

•FujitsuF900iT

•MotorolaA768i,A780,E398,V3,V600,V710

•Nokia3600,3660,6230,6600,6670,6820,7610,N-Gage

•PanasonicX70

•SiemensSX1,U15

•Sony-EricssonP800,P900,T610,T68i,S700i,Z600,K700i

All products mentioned are trademarks or registered trademarks of their respective owners.

www.manhattan-products.com

MANHATTAN

offers a complete line of PC Components, Peripherals, Cables

and Accessories. Ask your local computer dealer for more information

or visit us online at

Manhattan Bluetooth Stereo Headset User manual

Brand: Manhattan

Model: Bluetooth Stereo Headset

Category: Mobile headsets

Type: User manual

This manual is also suitable for

175944

Download PDF

report

Manhattan Bluetooth Stereo Headset User manual

This manual is also suitable for

Manhattan Bluetooth Stereo Headset User manual

Related papers

Other documents