7/23/2007
2
Content:
1. Mechanical:
Checking the Flange Focal Distance……………………………………….…………3
235 Spacer Plate………………………………………………………………………..4
3 Perforation Conversion……………………………………………………………….5
Adjust Timing…………………………………………………………………………….8
Changing drive belts…………………………………………………………………….9
2. Electronically:
Scope…………………………………………………………………………………...10
Safety advice and conventions……………………………………………………....10
Specifications…………………………………………………………………………..11
Connector pin outs...............................................................................................12
3. Software update:
Software Update Procedure………………………………………………………….13
4. Tools:
Tool list………………………………………………………………………………….15