Panasonic TYFB10HMD Operating instructions

Model No. TY-FB10HMD

Dual HDMI Terminal Board

Operating Instructions

Before connecting, operating or adjusting this product, please read

these instructions completely. Please keep this manual for future

reference.

Dual HDMI Terminal Board

Bedienungsanleitung

Vor dem Anschluß, Betrieb oder der Einstellung dieses Gerätes

lesen Sie bitte diese Bedienungsanleitung vollständig durch.

Bitte heben Sie diese Bedienungsanleitung als zukünftige

Referenz sorgfältig auf.

Piastra doppio terminale HDMI

Istruzioni per l’uso

Prima di collegare, utilizzare o regolare questo apparecchio,

leggere attentamente le presenti istruzioni.

Conservare poi il manuale per ogni eventuale futura

consultazione.

Plaque à bornes HDMI double

Mode d’emploi

Avant d’effectuer quelque raccordement que ce soit ou de régler

l’appareil, veuillez lire attentivement ce mode d’emploi.

Conservez ce mode d’emploi pour référence.

Tarjeta de terminales HDMI doble

Manual de instrucciones

Antes de conectar, utilizar o ajustar este producto, lea

completamente este manual de instrucciones.

Guarde este manual para consultarlo en el futuro en caso de ser

necesario.

ᚗ HDMI ᆓφݗ

ٻңᇴ݃ਫ

ಣ၇ȃᐈձܗ።ᐍҐ౱ࠣࠊȂ፝ӒၐಡᎨ᠟೼ٳᇴ݃Ȅ

፝׃๢ߴԇԫКьȂп߰Сࡤ୥ՄȄ

Блок разъемов Dual HDMI

Инструкция по эксплуатации

Перед подсоединением, эксплуатацией или настройкой

данного изделия полностью прочитайте настоящие

инструкции. Сохраните данное руководство для последующего

использования.

Подвійна панель виводів HDMI

Інструкція з експлуатації

Ознайомтесь уважно з даною інструкцією перед підключенням,

використанням або настройкою даного виробу. Зберігайте

інструкцію з експлуатації для довідки у майбутньому.

EnglishDeutschItalianoFrançaisEspañol

፩ၭ

РусскийУкраїнська

TQZH820

Page is loading ...

English

6

Safety Precautions ( be sure to observe )

Accessories

Check to make sure that the following accessories are included in the Terminal board package:

Handling Cautions

WARNING

• Never attempt to disassemble or modify this product.

To avoid fire, shock, or failure.

• If you sense smoke, an odd odor, or unusual noises while in operation, immediately unplug the display.

Switch off the display and unplug the power cord plug from the supply outlet.

To avoid fire or shock, do not leave the power of the display turned on.

• To avoid shock or other problems, do not leave the power cord plug plugged into the supply outlet.

• Do not touch connector contacts with hands directly.

To avoid electrostatic damage to internal parts, before handling this product touch a large metallic object such

as a steel cabinet to discharge yourself.

• Be sure to use the supplied cable or specified parts for interconnection.

To avoid malfunction or failure, do not use parts other than those recommended.

• Please contact our designated service department for installation or change of this Product.

To Service personnel:

Before removing or installing the Terminal Board, be sure to turn power of the display off and unplug

the power cord plug from the supply outlet.

Terminal function label ( 1 sheet ) Terminal board replacement Instructions

Screw × 4

( Affix this label to the applicable slot of the rear

panel of the display.)

English

PC IN

SLOT1

SLOT2

SLOT3

HDMI

AV OUT

HDMI

AV OUT

13

24

19

18

7

Connection

Back view of the

Display

Applicable input signals

Video signal

Notes

• This terminal board has two pairs of inputs thus “-A” or “-B” is added at the end of each Input label to distinguish

between those inputs.

e.g.) INPUT1A, INPUT1B

• “-A” and “-B” will be displayed alternately when press the DIRECT INPUT button on the display’s remote control.

e.g.) INPUT1A

→

INPUT1B

→

INPUT1A - - - (When press the INPUT 1 button with installing the terminal board in Slot1)

• All inputs will be changed in rotation when press the INPUT button on the remote control. (However, the input

display time for this board's slot will be longer than that for the other slots.)

e.g.) INPUT1

→

INPUT2A

→

INPUT2B

→

INPUT3

→

PC

→

INPUT1 - - -

(When press the INPUT button with installing the terminal board in Slot 2)

• “-A” or “-B” will be added at the end of the selected label if Input label is chosen to be displayed.

e.g.) DVD2B (Label display of INPUT B when the terminal board is installed in Slot2 and DVD is chosen as a label.)

• Input A and B cannot be displayed together.

Signal format

fV

(Hz)

fH

(kHz)

Dot

clock

(MHz)

Number

of active

pixels

Total

number of

pixels

Number

of active

lines

Total

number of

lines

1 VGA60 59.94 31.47 25.18 640 800 480 525

2 525/60p 59.94 31.47 27.00 720 858 480 525

3 625/50p 50.00 31.25 27.00 720 864 576 625

4 750/60p 60.00 45.00 74.25 1280 1650 720 750

5 750/50p 50.00 37.50 74.25 1280 1980 720 750

6 1125/60i 60.00 33.75 74.25 1920 2200 1080 1125

7 1125/50i 50.00 28.13 74.25 1920 2640 1080 1125

8

1125/60p

60.00 67.50 148.50 1920 2200 1080 1125

9

1125/50p

50.00 56.26 148.50 1920 2640 1080 1125

10

1125/24p

24.00 27.00 74.25 1920 2750 1080 1125

e.g.) DVD player (option) e.g.) DVD recorder (option)

[Pin assignments and signal names]

Pin No. Signal Pin No. Signal

ヂ

T.M.D.S Data2+

ヌ

T.M.D.S Clock Shield

ッ

T.M.D.S Data2 Shield

ネ

T.M.D.S Clock-

ツ

T.M.D.S Data2-

ノ

CEC

ヅ

T.M.D.S Data1+

ハ

Reserved

(N.C.)

テ

T.M.D.S Data1 Shield

デ

T.M.D.S Data1-

バ

SCL

ト

T.M.D.S Data0+

パ

SDA

ド

T.M.D.S Data0 Shield

ヒ

DDC/CEC Ground

ナ

T.M.D.S Data0-

ビ

+5V Power

ニ

T.M.D.S Clock+

ピ

Hot Plug Detect

Applicable for PF10 series and

future models.

Audio signal

Linear PCM :

48/44.1/32 kHz

HDMI cable (option)

2 slots model Slot1, Slot2

3 slots model

Slot1, Slot2

(Slot3 is not compatible)

Slot Nos. of the display unit that are compatible

with terminal board attachments

Page is loading ...

22

Trademark Acknowledgement

HDMI, the HDMI logo and High-Definition Multimedia Interface are

trademarks or registered trademarks of HDMI Licensing LLC.

Warenzeichen

HDMI, das HDMI-Logo und High-Definition Multimedia Interface sind

Warenzeichen oder eingetragene Warenzeichen von HDMI Licensing

LLC.

Marchi di fabbrica

L’acronimo “HDMI”, il logo HDMI e l’espressione “High-Definition

Multimedia Interface” (“Interfaccia multimediale ad alta risoluzione”)

sono marchi di fabbrica o marchi registrati di proprietà della Società

HDMI Licensing LLC.

Reconnaissance des marques de commerce

HDMl, le logo HDMI et High-Definition Multimedia Interface sont des

marques de commerce ou des marques déposées de HDMI Licensing

LLC.

Reconocimiento de marca registrada

HDMI, el símbolo HDMI y la Interface de Multimedios de Alta

Definición son marcas comerciales o marcas registradas de HDMI

Licensing LLC.

୧ዀᇴ݃

IENJȃIENJ!ዀᇭᇅ!Ijhi.Efgjojujpo!Nvmujnfejb!Joufsgbdf!ࣲ࣐!

IENJ!Mjdfotjoh!MMD!ޠ୧ዀܗພь୧ዀȄ

Информация о торговых марках

HDMI, логотип HDMI и High-Definition Multimedia Interface являются

товарными знаками или зарегистрированными товарными

знаками HDMI Licensing LLC.

Визнання торгової марки

HDMI, HDMI логотипи та High-Definition Multimedia Interface є

торговими марками або зареєстрованими торговими марками

HDMI Licensing LLC.

Page is loading ...

Matsushita Electric Industrial Co., Ltd.

M0707M0

Web Site : http://www.panasonic.net

Panasonic TYFB10HMD Operating instructions

This manual is also suitable for

Panasonic TYFB10HMD Operating instructions

in other languages

Related papers

Other documents