George Kovacs GKCI-084 User manual

Type
User manual

This manual is also suitable for

Installing The Connector GKCE/GKCI/GKCT/GKCX/GKCL-A/GKCL-C
The connector is used to connect two rails. Follow the step-by-step instrutions below.
1. Loosen the 4 Allen Screws (A)
using Allen Wrench provided. Don't
remove Allen Screw completely (B).
2.Insert the rail,then tighten the screw
by allen wrench.
3.Finally,check to insure rail is tight
and secure.
LA-1327E
A
B
  • Page 1 1

George Kovacs GKCI-084 User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI