Ancona AN-7300 Installation guide

Pure Acrylic Stone is a unique non-porous, anti-bacterial solid which naturally resists stains, scratches and

discolouring.

Here are a few tips and instructions to help extend the life and natural beauty of your bench:

ANCONA HOME SHOWER BENCH: CARE INSTRUCTIONS

Clean your bench regularly with a dish detergent or other gentle cleanser and warm water.

Use a soft cloth and gently rub in the direction of the grain to wipe dry.

Immediately clean spills:

DO NOT use steel wool or scouring pads for regular cleaning, as this will damage the surface and cause

discoloration.

DO NOT use any cleaning products containing sulfuric acid or hydrochloric acid, as these will damage the

surface.

DO NOT leave wet towels or sponges on the bench for a long period of time as this may ruin the ﬁnish of the

bench.

REGULAR CLEANING

•

To keep the surface of the bench looking great, occasionally deep clean using a soft sponge with a surface cleaner

designed for solid surfaces and diluted bleach.

Gently scrub the surface of the bench with the cleaner until all oily or discolored patches disappear.

Rinse away the cleaning product with warm water and spray on the diluted bleach and let it stand for at least

two hours. This will sanitize and brighten the bench.

Rinse the bleach away with warm water.

OCCASIONAL DEEP CLEAN

If your bench becomes lightly stained or its color becomes dull you can restore it to its original luster.

LONG TERM CARE

RESTORING A MATTE FINISH

Rinse the surface with water to remove all dust.

Use water and polishing pads to polish the area, if a ﬁner ﬁnish is desired, you can use 800 grit sandpaper.

Wipe clean with a dry cloth.

Stains from non-porous substances such as coﬀee and tea can easily be removed with a 3M Scotch-Brite

pad or by applying a little detergent and wiping the surface clean with water. For long-standing stains, apply

a bit more force when cleaning and wipe clean.

•