Topeak TW004-SP04 Owner's manual

Topeak
Brand
Topeak
Model
TW004-SP04
Category
Car kits
Type
Owner's manual
GB
User's Guide
Dual-Touch Xtender
Art. no TW004-SP04
Make sure to read all instructions and
follow the installation procedures in the
Dual-Touch Bike Stand manual before
mounting the stand.
Manual downloads :
www.topeak.com/Service/Downloads
Max. Height
3.55 m
(11 ft-7.8 in)
Increased
Height
0.35 m
(1 ft- 2 in)
IMPORTANT NOTE :
Do not mount any hooks on Dual-Touch
Xtender. Maximum capacity for Dual
Touch Bike Stand with Xtender is 4 hooks.
(two hooks on each side).
Repair & storage solutions
DUAL-TOUCH
BIKESTAND
M-TW004-SP04-GB 6/12
* Tool required : 5 mm Allen key
TIGHTEN
3 Nm
Recommended
Torque
2-year Warranty: All mechanical components against manufacturer
defects only.
Warranty Claim Requirements
To obtain warranty service, you must have your original sales receipt.
Items returned without a sales receipt will assume that the warranty
begins on the date of manufacture. All warranties will be void if the
product is damaged due to user crash, abuse, system alteration,
modification, or used in any way not intended as described in this
manual.
* The specifications and design are subject to change without notice.
Please contact your Topeak dealer with any questions.
For USA customer service call : 1-800-250-3068
www.topeak.com
WARRANTY
Copyright © Topeak, Inc.
Dual-Touch
Bike Stand
1 2
Remove Ceiling
Rubber Top.
5 mm
Allen
key
LOOSEN
3
Loosen the bolt to mount
Dual-Touch Xtender.
4
Tighten the bolt to
fix Dual-Touch
Xtender on Dual-
Touch Bike Stand
securely.
for
Dual-Touch Xtender
INSTALLATION
  • Page 1 1
  • Page 2 2

Topeak TW004-SP04 Owner's manual

Topeak
Brand
Topeak
Model
TW004-SP04
Category
Car kits
Type
Owner's manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents