work chairs
May 22, 2023
2
tone synchro-tilt task chair & stool overview
Mesh Back:
- Performance Mesh
- Lifestyle Mesh
Arm:
- No Arms
- 2D Arms
- 4D Arms
Reclining Tension Adjustment
Synchro Tilt Mechanism:
- Ratio 2.5:1
5-Star Base finish defaults to
frame selection
Standard pneumatic seat height-adjustment:
- Task Chair: 3.75"
Upholstered Seat
Tilt Lock
Seat Slider:
2-3/8" Depth Range
Casters / Glide options:
- Hard Caster / Glide
- Soft Caster / Glide
- Finish will default to co-ordinate with
frame finish
Optional Lumbar Support:
- 3" Height-Adjustment
Frame:
- Ebony
- Dimpse
Quiet, yet spirited, design. Visually soft and minimalist, Tone is designed to blend seamlessly with its setting. Its rounded frame
invites touch and a pure silhouette balances simplicity with superior comfort.
Tone allows for an expressive and efficient use of materials. Two different mesh styles are available in an uplifting color palette.
Thoughtful in each detail at an accessible price, Tone marries the needs of people, place and planet in an elegant whole.
Tone is available in a task chair and swivel stool. Task chair is available fully assembled or knocked down.
Tone – Task Chair, Mesh Back (NTTM)
Task Chair –
2D Arms
(NTTMWY)
Task Chair –
No Arms
(NTTMNN)
Task Chair –
4D Arms
(NTTMPN)
Task Chair –
No Arms
(NTTMNY)
Task Chair –
4D Arms
(NTTMPY)
Task Chair –
2D Arms
(NTTMWN)
frame finishes mesh finishes
Dimpse Pebble Rooibos IndigoOnyx Coral MinuitEbony Pearl Ochre EucalyptusCharcoal Umber Seaweed
with lumbar without lumbar
statement of line
work chairs
3
May 22, 2023
tone synchro-tilt task chair & stool overview
(continued)
Mesh Back:
- Performance Mesh
- Lifestyle Mesh
Arm:
- No Arms
- 2D Arms
- 4D Arms
Synchro Tilt Mechanism:
- Ratio 2.5:1
Reclining Tension Adjustment
Aluminum Foot Ring
Standard pneumatic seat height-adjustment:
- Stool: 7.75" Seat Slider:
2-3/8" Depth Range
Tilt Lock
Upholstered Seat
Casters / Glide options:
- Hard Caster / Glide
- Soft Caster / Glide
- Finish will default to co-ordinate with
frame finish
Optional Lumbar Support:
- 3" Height-Adjustment
Frame:
- Ebony
- Dimpse
Tone – Swivel Stool, Mesh Back (NTDM)
Swiwel Stool –
2D Arms
(NTDMWY)
Swiwel Stool –
No Arms
(NTDMNN)
Swiwel –
4D Arms
(NTDMPN)
Swiwel Stool –
No Arms
(NTDMNY)
Swiwel Stool –
4D Arms
(NTDMPY)
Swiwel Stool –
2D Arms
(NTDMWN)
frame finishes mesh finishes
Dimpse Pebble Rooibos IndigoOnyx Coral MinuitEbony Pearl Ochre EucalyptusCharcoal Umber Seaweed
with lumbar without lumbar
statement of line
work chairs
May 22, 2023
4
tone dimensions & material requirements
SEAT ONLY
COM COL
[yards] [sq. ft]]
With Mesh Back 0.75 12.7
Arm Height from Seat
2D Arms 8-1/8" - 12"
4D Arms 8-1/4" - 12-1/8"
Arm Height from Floor
Low 24-5/8" - 31-3/8"
Standard 26-1/2" - 34-1/4"
High 27-1/4" - 40-1/2"
Width Between Arms
2D Arms 16-3/8" - 19-1/2"
4D Arms 17-3/4" - 20-5/8"
Back Height from Seat
24"
Seat Width
19-1/2"
Back Width
20-3/4"
Lumbar Apex Height
5-5/8" - 8-5/8"
Seat Depth
16-1/2" - 18-7/8"
Seat Height
Low 15-3/4" - 18-1/2"
Standard 17-5/8" - 21-3/8"
High 18-3/8" - 23-5/8"
Angle between Seat and Back
97.4° - 116°
Seat Pan Angle 3˚
Overall Height
Low 37-5/8" - 40-3/8"
Standard 39 1/2" - 43-1/2"
High 40-1/4" - 45-1/2"
Overall Width
29" Overall Depth
29"
COM/COL material requirement
The pattern, repeat and directionality of fabric may increase the amount of yardage required.
Leather quantities should always be rounded up to the next hide size, as yields vary from 60-80% and are affected by the quality, size
and shape of the hide, and by the location and quantity of blemishes.
weight
Tone Task - Mesh, No Arms 31.5 lbs
Tone Task - Mesh, 2D Arms, 4D Arms 36.5 lbs
features
• Designed and tested for users up to 300 lbs
• Meets ANSI/BIFMA Requirement
Task Chair
work chairs
5
May 22, 2023
tone dimensions & material requirements (continued)
SEAT ONLY
COM COL
[yards] [sq. ft]
With Mesh Back 0.75 12.7
Arm Height from Seat
2D Arms 8-1/8" - 12"
4D Arms 8-1/4" - 12-1/8"
Arm Height from Floor
2D Arms 26-1/2" - 34-1/4"
4D Arms 26-5/8" - 34-3/8"
Width Between Arms
2D Arms16-3/8" - 19-1/2"
4D Arms 17-3/4" - 20-5/8"
Back Height from Seat
24"
Seat Width
19-1/2"
Back Width
20-3/4"
Lumbar Apex Height
5-5/8" - 8-5/8"
Seat Depth
16-1/2" - 18-7/8"
Seat Height from Floor
22-1/2" - 30-1/4"
Footring Height
from Floor 9"-13"
Angle between Seat and
Back 97.4°-106.4°
Seat Pan Angle 3˚
Overall Height
44-1/2" - 52-1/4"
Overall Diameter
29"
Overall Diameter
29"
Footring Height from Floor
9"-13"
COM/COL material requirement
The pattern, repeat and directionality of fabric may increase the amount of yardage required.
Leather quantities should always be rounded up to the next hide size, as yields vary from 60-80% and are affected by the quality, size
and shape of the hide, and by the location and quantity of blemishes.
weight
Swivel Stool-Mesh, No Arms 36.5 lbs
Swivel Stool-Mesh, 2D Arms, 4D Arms 41.5 lbs
features
• Designed and tested for users up to 300 lbs
• Meets ANSI/BIFMA Requirement
work chairs
May 22, 2023
6
tone adjustment features & instructions
To adjust the width of the 2D
and 4D arms, grab the arm pad
on both sides and push to the left
or right to the desired position.
For the 4D arm option,
simultaneously pivot the arm
pad inward or outward to
desired angle. Arm pad depth
can be controlled by grabbing
the pad and sliding it forward or
backward.
Turning the knob found under
the left side of the seat locks
and unlocks the recline. Rotate
backwards to unlock and rotate
forward to lock. To reset the chair
to an upright position, unlock and
completely recline the chair back.
Chair can be locked in 4 positions.
Rotating the knob found under
the right side of the seat increases
or reduces the resistance of the
reclining chair back. Rotate
forward to tighten tension. Rotate
knob backwards to loosen tension.
To adjust the arm height, press
the button below either arm rest
to raise or lower it to the desired
position.
Seat height can be adjusted by
pulling the lever underneath
the seat on the right side. When
the lever is pulled upward, the
weight of the body will cause
the seat to lower, and releasing
it stops the seat at the desired
height. Pulling up on the lever
with no weight on the seat
allows it to rise.
tilt tension adjustment
arm width, depth and pivot adjustment
back tilt lock adjustment
arm height-adjustment seat height-adjustment
work chairs
7
May 22, 2023
tone adjustment features & instructions (continued)
To raise or lower the stool’s foot
ring, turn the foot ring’s knob
counter-clockwise to release the
foot ring and adjust the ring
until you reach the desired level.
Turn the knob clockwise to lock
into place.
Seat depth adjustment can be
found under the left hand side
of the seat. To adjust the seat
depth, pull the lever upward and
simultaneously lift your weight
from the seat while sliding the
seat forward. For either direction,
release the lever to lock the seat in
place.
While sitting on the chair, put
arms behind back to grab both
ends of the lumbar support
element. Slide lumbar up or down
to required height.
lumbar support height-adjustment
footring adjustment (stool)
seat depth adjustment
work chairs
May 22, 2023
8
NTTM
Tone Task Chair, Mesh Back
FEATURES
• Full synchro-tilt mechanism (2.5:1 tilt ratio) with 4 position lock
• Reclining tension adjustment
• Standard pneumatic cylinder provides a height-adjustment of 3.75" for task chair
• Seat depth adjustment of 2 3/8"
• Available armless, with 2D arms (height and width) or 4D arms (height, width, depth and
pivot) adjustments
• Optional 3" height-adjustable lumbar support
• Frame finish available in ebony or dimpse with 5-star base defaulting to frame finish
• Back available in lifestyle or performance mesh, 12 color options
• Hard casters are standard and are well suited for soft flooring such as carpeting
• Soft casters are available for use on hard flooring, such as wood, concrete or tile
• Hard and soft glides also available
NOTES
Caster finish will default to co-ordinate with frame finish. Dimpse frame finish will have grey
casters / grey glides. Ebony frame finish will have ebony casters / ebony glides.
Assembly Required (K) is shipped knocked down and customer is responsible for assembly.
DESCRIPTION PRICE
COM/ COL/
Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 Grade 6 Grade 7 Grade 8 Grade 9 Grade 10
No Arms, No Lumbar Support 798 826 854 882 910 938 966 994 1022 1050
No Arms, With Lumbar Support 825 853 881 909 937 965 993 1021 1049 1077
2D Arms, No Lumbar Support 872 900 928 956 984 1012 1040 1068 1096 1124
2D Arms, With Lumbar Support 899 927 955 983 1011 1039 1067 1095 1123 1151
4D Arms, No Lumbar Support 903 931 959 987 1015 1043 1071 1099 1127 1155
4D Arms, With Lumbar Support 930 958 986 1014 1042 1070 1098 1126 1154 1182
Leather Leather Leather Leather
LA LB LC LD
No Arms, No Lumbar Support 1078 1106 1134 1162
No Arms, With Lumbar Support 1105 1133 1161 1189
2D Arms, No Lumbar Support 1152 1180 1208 1236
2D Arms, With Lumbar Support 1179 1207 1235 1263
4D Arms, No Lumbar Support 1183 1211 1239 1267
4D Arms, With Lumbar Support 1210 1238 1266 1294
If Soft Casters (A) are specified add 18
If Hard Glides (B) are specified add 96
If Soft Glides (C) are specified add 142
If Frame Finish, Dimpse (GQ) is specified add 121
Arm Style
N No Arms
W 2D Arms
P 4D Arms
Lumbar Support
N No Lumbar
Support
Y With Lumbar
Support
Back Mesh
Finish
Tone Performance
Mesh
Tone Lifestyle
Mesh
Seat Upholstery
Finish
Fabric
Leather
Cylinder Style
1 Standard
2 High
3 Low
Frame Finish
8B Ebony
GQ Dimpse
Casters/ Glides
Hard Casters
A Soft Casters
B Hard Glides
C Soft Glides
Assembly Style
F Fully
Assembled
K Assembly
Required
PRODUCT OPTIONS
SAMPLE ORDER CODE
NTTM N YKK01 E523 18B A F
work chairs
9
May 22, 2023
NTDM
Tone Swivel Stool, Mesh Back
FEATURES
• Full synchro-tilt mechanism with 4 position lock
• Reclining tension adjustment
• Standard pneumatic cylinder provides a height-adjustment of 7.75" for stool
• Seat depth adjustment of 2 3/8"
• Available armless, with 2D arms (height and width) or 4D (height, width, depth and pivot)
adjustments
• Optional 3" height-adjustable lumbar support
• Frame finish available in ebony or dimpse
• Swivel Stool includes an aluminum foot ring
• Back available in lifestyle or performance mesh, 12 color options
• Hard casters are standard and are well suited for soft flooring such as carpeting
• Soft casters are available for use on hard flooring, such as wood, concrete or tile
• Hard and soft glides also available
NOTES
Caster finish will default to frame finish. Dimpse frame finish will have grey casters / grey glides.
Ebony frame finish will have ebony casters / black glides.
Stool is shipped semi knocked down and customer is responsible for assembly.
DESCRIPTION PRICE
COM/ COL/
Grade 1 Grade 2 Grade 3 Grade 4 Grade 5 Grade 6 Grade 7 Grade 8 Grade 9 Grade 10
No Arms, No Lumbar Support 947 975 1003 1031 1059 1087 1115 1143 1171 1199
No Arms, With Lumbar Support 974 1002 1030 1058 1086 1114 1142 1170 1198 1226
2D Arms, No Lumbar Support 1021 1049 1077 1105 1133 1161 1189 1217 1245 1273
2D Arms, With Lumbar Support 1048 1076 1104 1132 1160 1188 1216 1244 1272 1300
4D Arms, No Lumbar Support 1052 1080 1108 1136 1164 1192 1220 1248 1276 1304
4D Arms, With Lumbar Support 1079 1107 1135 1163 1191 1219 1247 1275 1303 1331
Leather Leather Leather Leather
LA LB LC LD
No Arms, No Lumbar Support 1227 1255 1283 1311
No Arms, With Lumbar Support 1254 1282 1310 1338
2D Arms, No Lumbar Support 1301 1329 1357 1385
2D Arms, With Lumbar Support 1328 1356 1384 1412
4D Arms, No Lumbar Support 1332 1360 1388 1416
4D Arms, With Lumbar Support 1359 1387 1415 1443
If Soft Casters (A) are specified add 18
If Hard Glides (B) are specified add 96
If Soft Glides (C) are specified add 142
If Frame Finish, Dimpse (GQ) is specified add 121
Arm Style
N No Arms
W 2D Arms
P 4D Arms
Lumbar Element
N No Lumbar Support
Y With Lumbar Support
Back Mesh Finish
Tone Performance Mesh
Tone Lifestyle Mesh
Seat Upholstery Finish
Fabric
Leather
Frame Finish
8B Ebony
GQ Dimpse
Casters/ Glides
Hard Casters
A Soft Casters
B Hard Glides
C Soft Glides
PRODUCT OPTIONS
SAMPLE ORDER CODE
NTDM N YKK01 E523 8B A
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Space Seating 13-37N20D-6 Operating instructions
-
Work Smart DC940-231 Operating instructions
-
Office Star Products 15-37A720D Operating instructions
-
YOTRIO Beacon Park 8 Piece Dining Set – Dining Chair Assembly Instructions
-
Alvin Onyx User manual
-
Fellowes C.S. Ergonomics RH 400 User manual
-
IBM 1200 User manual
-
Oxford Garden Salino Bar Stool Assembly Instructions
-
Global Upholstery Co. 2051-4 User manual
-
