MEMUP MEDIA DISK MX Owner's manual
- Category
- Digital media players
- Type
- Owner's manual
This manual is also suitable for
User Guide
Instruction Manual
User Guide
User Guide
Instruction Manual
Instruction Manual
MEDIADISK MX SeriesMEDIADISK MX Series
Feel Design
INSTRUCTION MANUAL
1. Player View.................................................................................................. 1
2. Features....................................................................................................... 2
3. Specifications ............................................................................................. 3
4. Precautions ................................................................................................. 3
5. Installation Connection .............................................................................. 4
6. Remote Control........................................................................................... 7
7. User interface.............................................................................................. 8
8. Upgrading process ................................................................................... 11
9. Trouble shooting....................................................................................... 12
- 1 -
1. Player View
- 2 -
2. Features
Enjoy Your Movies on TV!
You can enjoy favorite movies and home video on TV, because Player supports most of
video formats: MPEG1, MPEG2, MPEG4, AVI, Divx3.11, 4x, 5x, XviD, DVD (IFO, VOB),
VCD (DAT), etc…
Digital Music Box
Player can play various audio files such as AC3, MP2, MP3, DTS pass through, WMA,
OGG through the TV speaker or your existing audio system.
Photo Album
Player can play digital photo files and display them to TV or projector.
Store JPEG photos directly from a PC through USB2.0 interface and enjoy a slide show for
your family and friends without using a computer
Portable HDD Storage
Player uses 3.5" HDD and it works just like an external USB2.0 hard drive when you
connect it to your PC and USB2.0 interface can support data transfer rate 480Mbps.
Easy firmware upgrading
Player can download latest firmware very easily through internet site and it can support
latest Player file format without any trouble.
- 3 -
3. Specifications
Video MPEG1/2,Div3.11.div4.0.div5.0.divx,Xvid,DVD(IFO,VOB),VCD(DAT), M2V,ISO
Audio AC3, MP2, MP3, DTS pass through Ogg, WMA. MPGA MPA
Supported File
Photo JPEG
USB2.0 480Mbps(Cypress chipset)
Component Video: RCA, YPbPr
Composite Video: RCA and S-Video
Audio: RCA L/R/ Coaxial .Optical
DVI-I(Digital Visual Interface, support analog signals and digital signals)
Input & Output
IR-Ext
User Interface
Full featured IR-Remote control
Button: Power .Play/Pause, Stop, Cancel, Up, Down, Left, Right, mp3
LCD panel(128×64)
OS Windows 98SE ,ME 2000.XP or later
HDD Type 3.5” SATA (NTFS, FAT32)
Power External 12v/2.5A DC adapter
Languages English, French, German, Spanish, Portuguese, Italian
Size 205*58*188mm
Include Player, RCA cable, AV Cable ,USB Cable (for PC), Power Adapter, Remote Control, CD Manual,
Adapter (DVI to HDMI)
4. Precautions
We strongly recommend to read the below Precautions
01 If unformatted HDD is inserted into Player, PC can’t detect Player. Make sure that HDD is
formatted. For "How to format a HDD", contact HDD manufacturer or the seller.
02 We strongly recommend you to back up the data to another safe media, We are responsible for the
hardware of the Player only but don't have responsibility for data damage or loss in a HDD.
03 Don't power off while file is playing.
04 Be careful of dropping, impact or shock. If a HDD is damaged by dropping .shocking, we couldn’t
be responsible for.
05 Be away from water, heavy moisture .If Player has liquid, unplug Player from source right away. If
you use Player under this condition, HDD may be fired or you may have electric shock
06 Be away from devices that transmit strong magnetic signal. It may cause data damage or loss on
HDD.
07 Don't touch Player by wet hands. It may cause electric shock.
08 Don't disassemble as users own accord. It may damage Player or lose the data.
09 Socket-outlet shall be installed near the equipment and shall be easily accessible.
10 The equipment is to be supplied from an identified USB port complying with requirements of
Limited Power Source.
11 The equipment support 3.5" Hard Disk up to 750G The firmware will be upgraded with higher
capacity of hard disk.
- 4 -
5. Installation Connection
１、Connection with ordinary (Composite) TV output
2、Connection with S-Video output
3、Connection with Component output
Connect Player and your TV
using the yellow Video cable.
Turn on the Player and TV. Select
appropriate video input mode on
your TV until you can get initial
Player screen.
Connect Player and TV using
S-Video cable .Turn on Player
and TV, select appropriate video
input mode on your TV until you
can get initial Player screen.
Connect Player and TV with
component cable as instructed.
Turn on Player and TV. Select
appropriate video input mode on
your TV (in this case, Component
input mode.)
- 5 -
4、Connection with 2 CH of Normal TV
5、Connection with Coaxial output
6、Connection with Optical output
Connect left (white) and right
(red) sound output to the
appropriate terminal of your TV or
Hi-Fi
When you have a multi channel
decoder/ amplifier with coaxial
input, you can enjoy 5.1CH high
quality sound through coaxial
cable. Illustration on the top
shows how to connect with
coaxial cable
When you have a multi channel
decoder/amplifier with optical
input, you can enjoy 5.1 high
quality sounds through optical
cable. Illustration on the top
shows how to connect with optical
cable.
- 6 -
7、Connection with computer
8、Connection with DVI output
Connect Player with your
computer by USB cable data will
be transferred from PC to Player.
(Player should be powered on)
and then can check new drive at
PC without installing driver at
Windows ME/2000/XP
Connect the player and TV with
DVI cable, Turn on the player and
your TV, please confirm your TV
is on DVI mode, then set the
player to DVI mode by pressing
“TV out” button of the remote
controller several times until the
picture appears (it supports
computer display with a DVI-RGB
adapter)
- 7 -
6. Remote control
Remote Controller Description
SETUP Enter/Exit the setup menu.
VOL- VOLUME DOWN
VOL+ VOLUME UP
MUTE Mute ON/OFF
POWER Power ON/OFF
TV out Change the display mode ( NTSC/S-VIDEO, PAL/S-VIDEO)
INFO Popup video information OSD during Video Play.
SEARCH Popup random access OSD during Video Play
PG UP Page Up / skip movie one by one during video play
PG DOWN Page Down / rotation in picture, playing mode/skip movie one by one
during video play
OK Select file & OK
LEFT,RIGHT,
UP,DOWN
Move cursor
BOOKMARK Direct play file in Bookmark
SUBTITLE Popup subtitle control OSD during Video
Audio Popup audio selection OSD during Video play
MP3 Play all music files in current directory.
PLAYLIST Play the PLAYLIST directly.
SHUFFLE Random play In current directory.
MENU Menu button during DVD IFO play
TITLE Title button during DVD IFO play
A-B A-B Repeat during DVD IFO play
REPEAT Repeat current file
ZOOM Zoom during Video Play or during picture play
FUNC Popup music function (sleep Timer, Volume balance, Saturation,
Brightness, Contrast ) OSD
Play
Play next file in audio playing mode/move previous chapter in DVD
navigation mode/support a minute seek function for playing a movie.
Fast Reverse during video play/10 second rewind during mp3 play
Pause
Stop play
Fast Forward
Play previous file
MEDIA Choose all type, movie, music, photo mode
- 8 -
7. User Interface
1、Video Setup
2、Audio Setup
3、Photo Setup
1) Video Out Support NTSC/S-Video,
YPbPr480i, YPbPr480p. YPbPr720p,
YPbPr1080i, PAL/S-Video, YPbPr/PAL.
2) TV Type: Support 4 × 3, 16:9
3) Brightness: You can control brightness
in range 0 ~ 100
4) Contrast: You can control contrast in
range 0 ~ 100
5) Saturation: You can control contrast in
range 0 ~ 100
1) Audio out Analog, Digital, both
2) Volume: You can control volume in
range 0 ~ 100
3) Volume balance: You can control
volume bal. in range 0 ~ 100
1) Photo Preview: on, off
2) Slide Period: You can set slide show
time interval (2 ~ 100 sec.)
3) Slide Effect: Fade in/Out, Zoom in/out
- 9 -
4、Skin Setup
5、Misc Setup
6、Firmware Setup (1)
Skin Type: Default Skin
1) Language: Multilingual
2) System Default: You can change
setting of the system default
3) Subtitle Size: You can select subtitle
font size (Middle/Large)
4) Subtitle Color: You can change color
of subtitle and its outline (Black /White,
Black/Yellow, White/Yellow)
Firmware upgrade:
To upgrade firmware, should make
"firmup" folder at root directory and
should copy download file at "firmup"
folder .And then you can browser
this file at setup F/W menu
- 10 -
7、Firmware Setup (2)
8、Play Video Files
9、Play Audio Files
Select [Media] ->Movie -> Then you
will see video files you saved into
Player.
Select a file you would prefer and
press [OK] button then file will be
played.
Select [Media] ->Music ->Then you
will see video files you saved into
Player.
Select a file you would prefer and
press [OK] button then file will be
played
Firmware upgrade: To upgrade
firmware, should make "firmup"
folder at root directory and should
copy download file at "firmup" folder.
And then you can browser this file at
setup F/W menu
- 11 -
10、Play Photo Files
8. Upgrading process
Firmware Upgrade
Firmware version check
1、Connect Player to your TV and turn on Player
2、Navigate with buttons to move to “F/W” menu and check your current firmware version.
3、Check the latest firmware version of Player. You ’ll be posted for any firmware updates or news if you
fill our the customer registration form at http://www.memup.com
How to download firmware
1、Download the latest firmware from http://www.memup.com to your PC.
2、Connect Player with your PC through USB cable and turn it on.
3、Your system will recognize Player as an external hard drive.
4、Make “firmup” folder at root directory.
5、Copy firmware files into “firmup” folder at the Player hard drive.
6、Turn off Player and bring it to your TV for firmware upgrade.
How to upgrade firmware
1、Connect Player to your TV and turn on Player.
2、Move to setup firmware upgrade menu
3、Press "OK" button more than 3 seconds to initialize update.
USB Connection with PC
Windows 98SE Driver Installation
1、Please run setup. exe file before connecting Player.
2、Please reboot after installation.
3、After reboot the system. please connect Player. Add New Hardware.
4、You will be able to see the new HDD disk drive inside Player on the “Device Manager tab”
Windows ME/XP/2000 Driver Installation
1、Windows ME/XP/2000 offer driver by itself. So you don’t need to install software.
2、If connect Player with PC run plug & play.
3、You will be able to see new HDD disk drive inside the Player on the “Device Manager tab”
Select [Media] ->Picture->Then
you will see video files you saved
into Player.
Select a file you would prefer and
press [OK] button then file will be
played
- 12 -
9. Trouble Shooting
Description Solution
The Player doesn't respond to
remote control
1. Make sure to have remote control towards player receiver on front
panel.
2. Reduce distance of remote control and player
3. Replace batteries of remote control.
No display on TV 1. Make sure video cable connection is correct
2. Choose right mode to match with your TV by pressing “TV Out” button
on player remote control (PAL or NTSC)
3. Make sure your TV is set properly, then set player by pressing “TV
Out” button of remote control several times until picture appears.
Make sure to have the appropriate system as default setting.
Upgrade fail 1. Make sure the upgrade firmware is correct
2. The upgrade firmware should be in the directory of firmup
Check Page 11 for upgrade detail.
Displays pictures or video or
audio file only
Press “Media” button of remote control and select "All type" among
media options of "All type", "Music", "Photo" and “Video"
User can see a photo when
playing a music
In music play mode,if you press "OK" button of remote control, screen
mode is changed to file list mode, and then user can browse a HDD.
User designated background
per folder
1. Make a file with name "Mybackground.jpeg"(warning, keep this file
name, don't change it , make sure the jpeg file size is 720*480)
2. Save that file in a folder which you want
3. Unplug USB and reboot the player system
4. if you select a folder which includes that jpeg file, background is
changed
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
MEMUP MEDIA DISK MX Owner's manual
- Category
- Digital media players
- Type
- Owner's manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
DANE-ELEC SO SMART MIMO User manual
-
DANE-ELEC SO SMART 802.11 User manual
-
Dvico HD M-5000U User manual
-
TVIX HD M-7000A Owner's manual
-
-
-
Dvico TviX SlimS1 1TB User manual
-
Dvico M-6600A User manual
-
-
Dvico Slim S1 Duo User manual
