Marvel ML24FAS1RS Dimensions Guide

Category
Barbecues & grills
Type
Dimensions Guide

Marvel ML24FAS1RS provides precise temperature management and industry-leading stability. It features Dynamic Cooling Technology™ for rapid cooling and two commercial-grade freezer bins for organized storage. The FreshFlo™ stainless steel shelf ensures even air circulation and temperature stability. Pristine white interior with efficient LED lighting enhances visibility. Audible and visual alarms signal when the door is ajar, saving energy and preserving food freshness. Vacation/Sabbath mode conserves energy during non-use periods.

Marvel ML24FAS1RS provides precise temperature management and industry-leading stability. It features Dynamic Cooling Technology™ for rapid cooling and two commercial-grade freezer bins for organized storage. The FreshFlo™ stainless steel shelf ensures even air circulation and temperature stability. Pristine white interior with efficient LED lighting enhances visibility. Audible and visual alarms signal when the door is ajar, saving energy and preserving food freshness. Vacation/Sabbath mode conserves energy during non-use periods.

www.marvelrefrigeration.com24” Marvel All Freezer Model # ML24FA 800.223.3900
1/16/Rev. a
24 Marvel All Freezer
Model # ML24FA**
Frost-free operation and tested to hold up to 200 lbs
of frozen goods
Marvel Intuit™ Integrated Control ensures precise
temperature management from -10 to 10° F (-23.3 to
-12.2°C) to keep contents evenly frozen throughout
Dynamic Cooling Technology™ rapidly cools and
delivers the industry’s best temperature stability
Keep items organized and within easy reach with two
commercial-grade chrome wire freezer bins on the
fully extendable Smooth Glide System
Adjustable FreshFlo™ stainless steel shelf helps
efciently circulate cold air and ensures even
temperature stability
Pristine arctic white interior is easy to wipe clean, even
in the corners
Efcient white LED interior lighting brightly illuminates
interior for better viewing of contents
Close Door Assist System™ gently and automatically
nishes closing door
Audible and visual alarms signal when door is left ajar
to protect food freshness and minimize energy use
Vacation/Sabbath mode conserves energy during
times when the unit is not in use and complies with
Sabbath requirements
Panel overlay option features soft-close integrated
hinge for true built-in installations
Height adjustment up to 1” with leveling legs
4” adjustable black toe kick
1-year parts and labor warranty, 5-year sealed system
warranty
Storage Capacity
4.7 total cubic feet (up to 3.5 cubic feet of
food storage capacity)
Storage Conguration
(1) full-width adjustable cantilever FreshFlo
stainless steel shelf (removable)
(2) commercial-grade chrome wire freezer baskets with full-
extension Smooth Glide System
Product Dimensions
23 W x 33 ¾ minimum H x 25
21
/
32
D (including handle)
Finish/Door Options
Ordering Details
Solid Stainless Steel Door, Right Hinge ML24FAS1RS
Solid Stainless Steel Door, Left Hinge ML24FAS1LS
Solid Overlay Panel Ready Door
Integrated Right Hinge
ML24FAP2RP
Solid Overlay Panel Ready Door
Integrated Left Hinge
ML24FAP2LP
Stainless Steel
Overlay Panel Ready
www.marvelrefrigeration.com24” Marvel All Freezer Model # ML24FA 800.223.3900
1/16/Rev. a
Dynamic Cooling Technology
delivers rapid cool down
and the industry’s best
temperature stability
The distinctive Marvel design features a
thermal-efcient cabinet and door combined
with Dynamic Cooling Technology™ for
superior temperature stability, faster cooling
times and speedy temperature recovery even
with high usage.
Front
Side
F
r
on
t
Forced
Air Fan
Evaporator
Plate
Return
Air Intake
Front
Side
F
r
on
Forced
Air Fan
Evaporator
Plate
Return
Air Intake
Width 23
7
/
8
Interior Finish Arctic White
Capacity
4.7 total cubic feet of food
storage capacity
Shelving System Cantilever
Shelf Fronts Formed Metal
Other Storage
(2) smooth-glide
full-extension chrome wire
baskets
Interior Lighting White LED Lighting
Toe Grill Finish Black
Hinge
Stainless Model: Classic Hinge
Panel Ready Model:
Integrated Hinge
Handle Designer Handle
Control Type
Marvel Intuit™ Integrated
Controls
Temperature Range -10 to 10° F (-23.3 to -12.2°C)
Lock No
Electrical Requirements 120V / 60Hz / 15A
Length of Power Cord 6 ft.
Product Dimensions
23⅞” W x 33¾” minimum H x
25
21
/
32
” D (including handle)
Depth to Front of Door 23
23
/
32
Depth to Handle 25
21
/
32
Depth with door at 90° 46
13
/
32
Shipping Weight 160 lbs
Finishes SS, B, W, O
Vacation /
Sabbath Mode
Yes
Agency Approvals CSA
Finishes Key
SS = Stainless Steel
B = Black
W = White
O = Overlay
9
"F"
21
1
2"
(54.6 cm)
* Depth dimension of rough-in opening may vary depend-
ing on each individual installation. To recess entire door "F"
dimension plus 1" (2.5 cm) for thickness of power cord plug
is required.
** Minimum rough-in opening required is to be larger than
the adjusted height of the cabinet.
# A grounded 15 amp dedicated circuit is required. Follow
all local building codes when installing electrical and appli-
ance.
APPLIES TO THE FOLLOWING MARVEL MODELS
ML15BC MA24BC
ML15RA MA24BR
MA24RA
ML24BC
ML24BR
ML24RA
PRODUCT DATA
MODEL
ELECTRICAL
REQUIREMENTS #
PRODUCT
WEIGHT
ML15**(G) or (S) 115V/60Hz/15A
105 lbs
(47.7 kg)
ML15**(P) or (F) 115V/60Hz/15A
105 lbs
(47.7 kg)
ML24**(G) or (S) 115V/60Hz/15A
140 lbs
(63.6 kg)
ML24**(P) or (F) 115V/60Hz/15A
140 lbs
(63.6 kg)
MA24**(G) or (S) 115V/60Hz/15A
140 lbs
(63.6 kg)
MA24**(P) or (F) 115V/60Hz/15A
140 lbs
((63.6 kg)
"D"
"E"
"H"
"J"
"G"
PRODUCT DIMENSIONS
Figure 8
!
WARNING
Floor mount Anti-tip Bracket must be installed for freestand-
ing applications. Not required for built in applications.
"A"
"B"
"C"
Cabinet Dimensions
"D" "E" "F"
23
7
8
(60.7 cm)
33
3
4
” to 34
3
4
(85.7 to 88.3 cm)
23
23
32
(60.2 cm)
“G” “H” “J
25
21
32
(65.2 cm)
46
13
32
(117.9 cm)
25
11
16
(65.2 cm)
24" Rough-In Dimensions
"A" "B" "C"
24”
(61 cm)
**34" to 35"
(86.4 to 88.9 cm)
24”
(61 cm)
www.marvelrefrigeration.com24” Marvel All Freezer Model # ML24FA 800.223.3900
1/16/Rev. a
Overlay Panels
14
!
CAUTION
1
5
32"
(2.9 cm)
Figure 17
Right Hand Hinged Door
24" (61 cm) wide appliance
Figure 18
Right Hand Hinged Door
24" (61 cm) wide appliance
OVERLAY DOOR PANEL INSTALLATION
1" (2.5 cm) diameter
x
1
4" (6 mm) deep
4 places
Clearance
for hinge
at top and
bottom
2"
(5.1 cm)
3
11
16"
(9.4 cm)
1
1
2"
(3.8 cm)
typical
1
4"
(6 mm)
Deep
Hinge side of door
Clearance for
screw head,
4 places
30
11
32"
(77.1 cm)
1
11
16"
(4.3 cm)
23
3
4"
(60.3 cm)
3
1
8"
(7.9 cm)
Top of door
Step 4: Assemble the panel to the door
The preferred method of attaching the panel to the door
is to clamp the panel to the door so it cannot move while
drilling the screw pilot holes. Use bar clamps or "C" clamps
with pads on the clamping surfaces that will not mar the
panel or the door. The custom overlay panel should be
ush with the top of the door and centered along the width
of the door. See Figure 10a. Drill holes through the gasket
extrusion using the 10 holes as pilot holes. Use the drill
size from the chart in Table "C", being careful not to drill
through the front surface of the panel, drill no deeper than
1
2" (12.7 mm) deep. If the overlay panel is thinner than
5
8" (16 mm) thick shorter screws will have to be obtained.
Fasten the panel to the door with the 10 screws provided in
the literature pack. (See Figure 19a). Remove the clamps
and replace the gasket in the gasket extrusion channels of
the door. Some force may be required to seat the gasket
into the channels. Be sure the gasket corners are seated
properly.
Material Type #10 Wood Screw
Hardwood
1
8" (3.2 mm) Diameter. Pilot Hole
Softwood
7
64 (2.8 mm) Diameter. Pilot Hole
Table C
Weight of overlay door panel must not exceed 15
pounds (6.8 kg) for a solid door model or 10 pounds
(4.5 kg) for a glass door model.
3
1
8"
(7.9 cm)
1
3
4"
(4.4 cm)
4
1
8"
(10.5 cm)
1
4" (6 mm)
radius is
permissible
This side
to door
3
1
8"
(7.9 cm)
3
27
32"
(9.8 cm)
1
3
16"
(3 cm)
14"
(35.6 cm)
4
7
8"
(12.4 cm)
For comprehensive installation instructions,
please visit www.marvelrefrigeration.com
18
!
CAUTION
Weight of overlay door panel must not
exceed 15 pounds (6.8 kg).
1
5
32"
(2.9 cm)
1
5
32"
(2.9 cm)
OVERLAY DOOR PANEL INSTALLATION
Clearance for
screw head,
4 places
Hinge side of door
Clearance
for hinge
at top and
bottom
Figure 20
Left Hand Hinged Door
24" (61 cm) wide appliance
Figure 21
Left Hand Hinged Door
24" (61 cm) wide appliance
Top of door
1
3
4"
(4.4 cm)
1
4"
(6 mm)
Deep
1" (2.5 cm) diameter
x
1
4" (6 mm) deep
6 places
2"
(5.1 cm)
3
11
16"
(9.4 cm)
1
1
2"
(3.8 cm)
typical
1
11
16"
(4.3 cm)
30
11
32"
(77.1 cm)
1
4" (6 mm)
radius is
permissible
14"
(35.6 cm)
1
3
16"
(3 cm)
3
1
8"
(7.9 cm)
Clearance
for hinge
at top and
bottom
Top of door
Clearance for
screw head,
4 places
Figure 18
Right Hand Hinged Door
24" (61 cm) wide appliance
Hinge side of door
23
3
4"
(60.3 cm)
23
3
4"
(60.3 cm)
Figure 19
Right Hand Hinged Door
24" (61 cm) wide appliance
3
1
8"
(7.9 cm)
1
3
4"
(4.4 cm)
2"
(5.1 cm)
3
11
16"
(9.4 cm)
1
4"
(6 mm)
Deep
30
11
32"
(77.1 cm)
1" (2.5 cm) diameter
x
1
4" (6 mm) deep
4 places
1
1
2"
(3.8 cm)
typical
1
11
16"
(4.3 cm)
4
7
8"
(12.4 cm)
4
7
8"
(12.4 cm)
14"
(35.6 cm)
1
3
16"
(3 cm)
1
4" (6 mm)
radius is
permissible
This side
facing interior
This side
facing interior
18
!
CAUTION
Weight of overlay door panel must not
exceed 15 pounds (6.8 kg).
1
5
32"
(2.9 cm)
1
5
32"
(2.9 cm)
OVERLAY DOOR PANEL INSTALLATION
Clearance for
screw head,
4 places
Hinge side of door
Clearance
for hinge
at top and
bottom
Figure 20
Left Hand Hinged Door
24" (61 cm) wide appliance
Figure 21
Left Hand Hinged Door
24" (61 cm) wide appliance
Top of door
1
3
4"
(4.4 cm)
1
4"
(6 mm)
Deep
1" (2.5 cm) diameter
x
1
4" (6 mm) deep
6 places
2"
(5.1 cm)
3
11
16"
(9.4 cm)
1
1
2"
(3.8 cm)
typical
1
11
16"
(4.3 cm)
30
11
32"
(77.1 cm)
1
4" (6 mm)
radius is
permissible
14"
(35.6 cm)
1
3
16"
(3 cm)
3
1
8"
(7.9 cm)
Clearance
for hinge
at top and
bottom
Top of door
Clearance for
screw head,
4 places
Figure 18
Right Hand Hinged Door
24" (61 cm) wide appliance
Hinge side of door
23
3
4"
(60.3 cm)
23
3
4"
(60.3 cm)
Figure 19
Right Hand Hinged Door
24" (61 cm) wide appliance
3
1
8"
(7.9 cm)
1
3
4"
(4.4 cm)
2"
(5.1 cm)
3
11
16"
(9.4 cm)
1
4"
(6 mm)
Deep
30
11
32"
(77.1 cm)
1" (2.5 cm) diameter
x
1
4" (6 mm) deep
4 places
1
1
2"
(3.8 cm)
typical
1
11
16"
(4.3 cm)
4
7
8"
(12.4 cm)
4
7
8"
(12.4 cm)
14"
(35.6 cm)
1
3
16"
(3 cm)
1
4" (6 mm)
radius is
permissible
This side
facing interior
This side
facing interior
15
Step 2: Remove the door gasket
With the door laying on a at surface and starting at a
corner of the door remove the magnetic door gasket from
the interior side of the door, see Figure 15. Set the gasket
aside on a at surface.
There are 10 holes in the gasket retainer extrusions, (3 on
each side and 2 at the top and bottom which are used to
fasten the panel to the front of the door. The screws are
provided in the literature pack.
Figure 14
Press and hold down this
tab on the wire connec-
tor and pull the connector
apart.
Figure 15
Figure 15a
Overlay panel
ush with top
of door.
Holes in
gasket
retainer.
Magnetic Gasket
remove starting at a
corner, grasp and pull
away from the door.
OVERLAY DOOR PANEL INSTALLATION
Step 3: Cut and drill the overlay panel
Depending on your model cut the overlay door panel to the
dimensions shown in Figures 16 to 19.
Overlay panel to
be centered on
width of door.
  • Page 1 1
  • Page 2 2
  • Page 3 3

Marvel ML24FAS1RS Dimensions Guide

Category
Barbecues & grills
Type
Dimensions Guide

Marvel ML24FAS1RS provides precise temperature management and industry-leading stability. It features Dynamic Cooling Technology™ for rapid cooling and two commercial-grade freezer bins for organized storage. The FreshFlo™ stainless steel shelf ensures even air circulation and temperature stability. Pristine white interior with efficient LED lighting enhances visibility. Audible and visual alarms signal when the door is ajar, saving energy and preserving food freshness. Vacation/Sabbath mode conserves energy during non-use periods.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI