Package contents
• Back-end caps*
• Compression collars (white and black)*
• Banana terminal plugs*
• Quick Setup Guide
*Note: Quantity is 4 each for RF-G1190 or 10 each for RF-G1195.
V3 ENGLISH 14-1058
Installing a banana plug
1 Cut the speaker wire evenly to the desired length, then slide the back-end cap onto the speaker wire.
2 Slide the compression collar onto the speaker wire. Use the black collars for smaller (16-18) gauge wire or the white
collars for larger (12-14) gauge wire.
3 Slide the banana plug terminal onto the speaker wire so that the terminal’s center pin is rmly inserted into the speaker
wire.
4 Screw the banana plug terminal and back-end cap together tightly.
One-year limited warranty
Visit www.rocketshproducts.com for details
Contact Rocketsh:
For customer service, call 1-800-620-2790 (U.S. and Canada) or 01-800-926-3010 (Mexico)
www.rocketshproducts.com
ROCKETFISH is a trademark of Best Buy and its aliated companies.
Registered in some countries. Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2014 Best Buy. All rights reserved.
Made in China
Centerpin®, Centerpin Technology, and the CP Symbol are registered trademarks of Centerpin Technology, Inc
QUICK SETUP GUIDE
RF-G1190 4-Pack Speaker Cable Banana Plugs
RF-G1195 10-Pack Speaker Cable Banana Plugs
Before using your new product, please read these instructions to prevent any damage.
/
