RocketFish RF-G1190 | RF-G1190-C Quick setup guide

Package contents

• Back-end caps*

• Compression collars (white and black)*

• Banana terminal plugs*

• Quick Setup Guide

*Note: Quantity is 4 each for RF-G1190 or 10 each for RF-G1195.

V3 ENGLISH 14-1058

Installing a banana plug

1 Cut the speaker wire evenly to the desired length, then slide the back-end cap onto the speaker wire.

2 Slide the compression collar onto the speaker wire. Use the black collars for smaller (16-18) gauge wire or the white

collars for larger (12-14) gauge wire.

3 Slide the banana plug terminal onto the speaker wire so that the terminal’s center pin is rmly inserted into the speaker

wire.

4 Screw the banana plug terminal and back-end cap together tightly.

One-year limited warranty

Visit www.rocketshproducts.com for details

Contact Rocketsh:

For customer service, call 1-800-620-2790 (U.S. and Canada) or 01-800-926-3010 (Mexico)

www.rocketshproducts.com

ROCKETFISH is a trademark of Best Buy and its aliated companies.

Registered in some countries. Distributed by Best Buy Purchasing, LLC

7601 Penn Ave South, Richeld, MN 55423 U.S.A.

Made in China

Centerpin®, Centerpin Technology, and the CP Symbol are registered trademarks of Centerpin Technology, Inc

QUICK SETUP GUIDE

RF-G1190 4-Pack Speaker Cable Banana Plugs

RF-G1195 10-Pack Speaker Cable Banana Plugs

Before using your new product, please read these instructions to prevent any damage.

This manual is also suitable for

Download PDF