Haier L32V6-A8 Owner's manual

Please READ this manual carefully

before operating the unit, and keep

it for future reference.

TFT-LCD COLOUR TELEVISION RECEIVER

OWNER'S MANUAL

This User's Manual is applicable for the following models:

L26V6-A8,L26V6-A8K,L32V6-A8,L32V6-A8K,L37V6-A8,L37V6-A8K,

L42V6-A8,L42V6-A8K,L32A9A,L32A9A-A,L32A1A,L32A1A-A

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Warning

*To avoid electric hazards, it is strongly suggested that the back cover not be opened, as

there is no any accessory inside the casing.

*If necessary, please contact authorized after-sales services.

*A lighting flash mark in a triangle: A potentially hazardous situation, which, if not avoided,

could result in serious injury by high voltage.

*An exclamation mark in a triangle: Major part or accessory of which technical specifications

must be followed if it is to be replaced.

Warning:

To avoid fire or electric hazards, never place your television

receiver in an area with heavy moisture. Attention should be

paid to avoid accidental scratches or impacts onto the LCD

screen.

*Please read this manual carefully before using your television and keep this

manual in a good place for future reference.

*To achieve the best performance of your television, read this User's Manual

carefully and properly store it for future reference.

*Information of screen displays and figures in the User's Manual may vary due

to technical innovations.

Caution:

Unauthorized disassembly of this product is prohibited.

English-1

Table of Contents

.........................................................................................2

...............................................................................................4

.......................................................................................4

...................................................................................5

........................................................................................6

...........................................................................................7

...............................................................................8

...............................................................................................9

.............................................................................................9

............................................................................................................9

........................................................................................9

......................................................................................................10

.......................................................................11

..........................................................................................11

............................................................................................12

...............................................................................................12

...............................................................................13

................................................................................................15

...................................................................................16

..............................................................................................18

.............................................................................................19

.........................................................................21

................................................................................................22

........................................................... 23

...............................................................27

.........................................................................28

...............................................................................................29

............................................................................................30

Safety precautions

Keys and ports

Front control panel

Side AV control panel

Rear terminal row

Remote controller

Keys of remote controller

Operation instructions

Power On/Off

Suspend mode

Menu

Menu exit memory

Preset TV program

TV input

Automatic program storage

Channel search

Program swap

Program edit

Program play

How to select program

AV1/AV2/S-Video/YUV/D-SUB/DVI/USB play

Input option

Picture quality setup

Sound adjust

System setup

Other functions

Position and phase adjust

Timer setup

Stream media playing system(only for the models that have the USB functions)

Stream media playing system

Connection of external AV devices

Connected to PC as monitor

Specifications

Troubleshooting

.........

Note: There is only one AV in L32A9A,L32A1A,L32A9A-A and L32A1A-A, instead of AV1 and AV2 .

That means, all AV1 and AV2 appearing in this manual should be one AV in these four models.

English-2

Safety precautions

The product should be tightly fixed to

avoid drop damages and even fire.

To avoid fire hazards, do not use this

product under direct sunlight or closely

to heat sources.

Do not locate the product close to water

or oil, which may cause fire hazards.

Unplug the power supply and antenna of

the product when there is a rainstorm,

especially thunderstorm.

Do not use damaged or worn electric

plugs, and keep electric cord away from

heat sources to avoid electric shocks or

fire hazards.

Do not connect excessive sockets in

parallel or share the same socket by

multiple plugs to avoid fire hazards.

The product must be placed on a solid

and stable surface to avoid collapse.

Unauthorized disassembly of the television

is prohibited to avoid electric shocks or fire

hazards. Contact authorized after-sales

service if technical service is needed.

Keep the product away from a transformer

or heat source to avoid fire hazards.

Disconnect the product from power supply

and contact authorized after-sales service

if abnormal sound is heard in the product.

English-3

Don't use or store inflammable

materials near the product to avoid

explosion or fire hazards.

Don't place the product in a humid area to avoid

fire hazards.

Safety precautions (continued)

The antenna of the product should

be away from electric cable to avoid

electric shocks.

Never touch the plug when your hand is wet

as this might cause electric shocks.

Always make sure that the television

is well plugged as poor electric

connection might cause fire.

When antenna is used, measures should be

taken to prevent water from flowing down along

the cable into the television.

Unplug the television, use soft fabric,

never chemicals, if you are going to

make cleaning of the product. Make

sure that no water drops in the product.

The plug and electric cable must be kept

clean to avoid electric shocks or fire hazards.

Disconnect the television from power

supply and antenna when there is a

rainstorm or thunderstorm to avoid

electric shocks or fire hazards.

Disconnect the television from power

supply to avoid electric shocks or fire

hazards in a long vocation.

English-4

1.MENU: menu display

2.TV/AV: input source select

3.P+/- : program plus and minus, menu options

4.V+/V-: volume increase and decrease, menu reset and entry

5.POWER: DC ON/OFF

6.USB interface (only for the models that have USB function)

7.Remote indicator: in red when standby mode

8.Remote control signal receive window

Keys and ports

Front control panel

26", 32" and 37" Series(not include L32A9A,L32A1A,L32A9A-A and L32A1A-A)

1

MENU

P-

P+

TV/AV

V-

V+

POWER

2

3

4

5

6

7

MENU TV/AV

P- P+ V- V+

POWER

1 2 3 4 5 67

1.MENU: menu display

2.TV/AV: input source select

3.P+/- : program plus and minus, menu options

4.V+/V-: volume increase and decrease, menu reset and entry

5.POWER: DC ON/OFF

6.Remote indicator: in red when standby mode

7.Remote control signal receive window

English-5

Keys and ports

42" Series

AV IN

(AV2 IN)

VIDEO

L

AUDIO

R

POWER

(AV2 IN)

Side AV control panel

26", 32" and 37" Series

Audio R

Audio L

Video

USB port

(

)

Only for models that

have USB function

Video

Audio L

Audio R

Power ON/OFF

Plug

1.Remote control signal receive window

2.Remote indicator: in red when standby mode

3.MENU: menu display

4.VOL+/VOL-: volume increase and decrease, menu reset and entry

5.CH+/CH- : program plus and minus, menu options

6.TV/AV: input source select

7.POWER : DC ON/OFF

42" Series

1

2

3

4

5

6

7

MENU

VOL-

VOL+

CH-

CH+

TV/AV

(Not include L32A9A,L32A1A,L32A9A-A

and L32A1A-A)

Keys and ports

English-6

1.Power: Power ON/OFF

2.Power input

3.DVI IN: digital RGB input

4.D-SUB IN: computer input

5.YUV (YCbCr,YPbPr) IN: video component input

6.AUDIO IN: external YUV (YCbCr,YPbPr) audio input

7.S-VIDEO IN: S terminal input

8.VIDEO IN: external video input (AV1)

9.AUDIO IN: external S-VIDEO/VIDEO input

10.AUDIO IN: external D-SUB/DVI input

11.Earphone port

12.ANT: antenna input

13.AUDIO OUT: audio output

Rear terminal row

Y

U

V L R

V

L

R

L

R

ANT.

DVI IN

D-SUB IN

YUV IN AUDIO IN

S-VIDEO

IN

VIDEO IN

AUDIO IN AUDIO IN

1.AUDIO OUT: audio output (to external speaker)

2.DVIIN: digital RGB input

3.D-SUB IN: computer input

4.YUV (YCbCr,YPbPr) IN: video component input

5.AUDIO IN: external YUV (YCbCr,YPbPr) audio input

6.S-VIDEO IN: S terminal input

7.VIDEO IN: external video input (AV1)

8.AUDIO IN: external S-VIDEO/VIDEO input

9.AUDIO IN: external D-SUB/DVI input

10.Earphone port

11.ANT: antenna input

Y

U

V L R

V

L

R

L

R

ANT.

DVI IN

D-SUB IN

YUV IN AUDIO IN

S-VIDEO

IN

VIDEO IN

AUDIO IN AUDIO IN

L

R

AUDIO OUT

26", 32" and 37" Series

42" Series

AUDIO OUT

Note: 1. The sequence of 1.POWER and 2.Power input is as follows ( )

in L32A9A,L32A1A,L32A9A-A and L32A1A-A

2. The 13 AUDIO OUT terminal is only available in models L32A9A and

L32A9A-A

English-7

Remote controller

Precautions

Battery loading

3

2

1

1.Slide open the cover of the battery compartment on the back of

the remote controller.

2.Load two 5# alkaline batteries in the compartment. (plus and

minus poles to respective mark)

3.Replace the cover of the battery compartment.

Make sure that there is no

obstacle between the remote

controller and television set.

As strong light may interfere the

signals, change your position to

operate the remote controller if

the television cannot be turned

on or off as you expect.

Keep the remote controller

away from heat source or

humid area to ensure

effective performance of

the remote controller.

Make sure that two 5# 1.5V alkaline

batteries are loaded. The batteries

must be of the same type. The batteries

must be located properly. The batteries

are not rechargeable.

English-8

The remote controller cannot be operated unless the batteries are

properly loaded.

1.FAV (Favorite)

2.I/II (NICAM)

3.Display

Display ON/OFF

4.Power ON/Standby

5.Digital TV program option

6.USB signal swap

()

7.Q. View (Quickly view)

To former program

8.Sleep

Displaying sleep time, adjustable

by every press

9.Digits

Program direct option

10.PSM (Picture mode option)

11. SSM (Sound mode option)

12.TV/AV swap

13.Mute

14.Program up and down, sound

increase and decrease, menu,

Menu reset

15.Up/down

16.Left/right

17.Prev. (Previous page)

18.Next (Next page)

19.Pause

20.ENTER(Play)

21.Swap

22.Return

Only for some models

Note:

This User's Manual covers the functions of the remote controller, including P+/-

(CH+/-), V-/+(VOL-/+), MENU, TV/AV and POWER keys for control of program up,

program down, volume decrease, volume increase, menu, TV/AV and power

ON/OFF.

Keys of remote controller

USB

Only for the models that

have USB function

DISPLAY

-/--/---

USB

CH+

FAV. POWER

Q.VIEW SLEEP

PSM

TV/AV MUTE

CH-

VOL- VOL+MENU

UP LEFT

PREV.

RIGHT

PAUSE ENTER

SWAP EXIT

English-9

Operation instructions

Menu

Suspend mode (ON/OFF)

If Suspend Mode is activated, under TV/AV1/AV2/

S-Video/YUV/D-SUB/DVI/USB status, 5 minutes

later after no signals are input, the television will

enter standby status automatically.

-/--/---

USB

DISPLAY FAV. POWER

Q.VIEW SLEEP

CH+

CH-

VOL- VOL+MENU

Power ON/OFF

1.Switch on power supply (indicator in red)

2.If the television screen does not light, press

Power button on the remote controller or the

television.

3.If pause is needed, press Power button on the

remote controller or the television.

4.Disconnect the power supply or unplug the

television if it is intended to completely cease the

television performance.

1.MENU: main menu entry, menu exit or return to

next higher level menu.

2.VOL+: next lower level menu entry.

3.VOL-/+: submenu options.

4.CH+/-: option of next higher/lower level menu.

Menu exit memory

When menu parameter is to be modified, the set

picture and sound status and preset program will

be remembered at menu exit.

English-10

TV input

Note:

Password must be entered when operating menu

tuning. The delivery password of this television is

0000.

Changing Password

Please Enter Password

Please Enter New Password

Press digit button on the remote control to enter

the digits.

Please Confirm New Password

2.AV1 3.AV2 4.SVideo 5.YUV 6.D-SUB 7.DVI 8.USB1.TV

A

B

C

Exchange

Tuning

Enter

Prog. Edit

Search

Auto Search

Change Password

TV/AV

CH+

CH-

VOL- VOL+MENU

Preset TV program

1.Press TV/AV button on television or remote

controller and the menu appears on the screen

( USB only displays on the ). models that have USB function

2.Press digit button 1 to swap to TV input terminal.

3.Press Menu button and then CH+ or CH- button

until the following menu appears on the screen.

English-11

Channel search

1.Press CH+/- button to change frequency bands.

2.Press VOL+ or VOL- to scan channel up or down.

Preset TV program

Automatic program storage

Auto Search

BAND VHF-L

FREQ. 188.16 MHz

Prog. 18

Cancel

Search

BAND VHF-L

FREQ. 188.16 MHz

Prog. 18

Cancel

<MENU>

CH+

CH-

VOL- VOL+MENU

CH+

CH-

VOL- VOL+MENU

1.Press CH+/- button on preset menu to select

automatic scan.

2.Press VOL+ button on the remote controller for

automatic scan of programs with higher level.

The program on desired channel will be saved.

If excessive channel signals of unwanted programs

are received in local area, manual search function

is recommended.

After preset menu appears on the screen, press VOL+

button on the remote controller to enter menu manual

search mode as follows:

When a desired television program has been

received by manual scan, the television will cease

scanning automatically and save the program with

current program number. Press the Menu button on

the television or remote controller to return to preset

menu.

English-12

1. Current program

Press VOL-/+ or digit button on the remote

controller for current program option.

2. Exchange program

Press VOL-/+ or digit button on the remote

controller for the program number to be exchanged.

3. Exchange

After current program and exchange program are

confirmed, select Exchange option and press

VOL+ button to exchange programs (OK on display).

Program edit

Program swap

Note: Sound system can be adjusted in sequence

of D/K, B/G, M, I, L and Auto.

Program swap

Exchange

Current Prog. 010

Exchange Prog. 020

Exchange OK

Prog. Edit

Current Prog.

OFF

D/K

Skip

Prog. Lock

Sound System

Fine Tune - +

CH+

CH-

VOL- VOL+MENU

CH+

CH-

VOL- VOL+MENU

Press CH+/- button on the remote controller or

television for Exchange in preset menu. Press

VOL+ button to enter the submenu.

Press CH+/- button in preset menu for program

edit. Press VOL+ button to enter the submenu as

follows:

English-13

Program play

How to select program

Preset program

1.Select desired program

Select buttons in sequence

Press CH+/- button for program option. (Note:

If Skip mode is activated, the program will not

appear.)

Select buttons directly

If program number 1~9 is selected, press digit

1~9 directly.

If two-digit or 3-digit programs are selected,

press -/--/--- button twice or trice. When icon --

or --- appears on the screen, press digit 0~9

program numbers.

If selected channel program is set at Lock on mode and

no password has been entered after initiation of the

television, the screen will indicate require password

entry. If wrong password is entered, channel selection

will fail and previous program will still stay on the screen.

The program locking password can be modified in the

preset menu and previous password will be required.

CH+

CH-

VOL- VOL+MENU

DISPLAY FAV. POWER

-/--/---

USB

Q.VIEW SLEEP

1. Current program

Press VOL-/+ or digit button on the remote controller

for current program option.

2.Skip

If current program number is to be cleared, press

VOL-/+ button to set Skip mode.

3.Program lock

If current program number is to be locked, press

VOL-/+ button to set on Prog. Lock.

4. Sound system

If current program sound is to be changed, press

VOL-/+ button and then the sound system will

change in sequence of Auto D/K B/G M I L.

Note: When channels are being scanned, sound

system will be automatically identified and set

according to television signals. If the sound system

is changed by manual operation, the correct sound

might not be broadcast.

5. Fine tune

If there is abnormal picture or sound in individual

program, press VOL-/+ button to make fine tune until

satisfactory picture and sound are achieved.

After Fine Tune is activated, AFC will be active for

the program, changing the program number into

yellow color. If green color is desired for the program

number, manually scan the same program.

English-14

DISPLAY

-/--/---

USB

CH+

FAV. POWER

Q.VIEW SLEEP

PSM

TV/AV MUTE

CH-

VOL- VOL+MENU

UP LEFT

PREV.

RIGHT

PAUSE ENTER

SWAP EXIT

Program play

How to select program (continued)

2. Press VOL+/- button to change sound volume.

3. Press Mute button to silence television sound. If the

same button is pressed again, the sound will resumed.

4. If current program number, color system and sound

system are to be displayed on the screen, press Display

button, and all the related information will appear at

up right corner of the screen. If the Display button is

pressed again, the displayed information will disappear.

5. Sound mode

If the SSM button is pressed again, the sound of

programs will change in following sequence:

Standard News User Music Standard

It is possible for users to select desired sound mode for

different television programs.

6. Picture mode

Press the PSM button on the remote controller, the

picture on the screen will change in sequence as follows

for user's option.

Bright Standard Soft User Bright

7. Off-time

a) Every press of Sleep button, the timer will be set in

the following sequence:

Off 5 15 30 60 90 120 150 180 Off

b) If remaining time of set timer is to be displayed, press

the Sleep button once.

8.NICAM

Press of the I/II button will result in fast swap of NICAM

function (bilingual or stereo) of current program. Under

AV mode, single tune (R or L) and stereo channel can be

selected.

9.Quickly view

Press Q. View button to resume previous program.

10.Fav. Folder

a)Press the shortcut key of Fav. folder until icon is on

display, then current program will be added to the folder.

b)Press the shortcut key to open FAV folder.

c)Press CH+/- button for selection of programs in FAV

folder. Then press VOL+ button to confirm the program.

English-15

AV1/AV2/S-Video/YUV/D-SUB/DVI/USB play

Input option

2. Press the digit button for swap of relative terminal.

2.AV1 3.AV2 4.SVideo 5.YUV 6.D-SUB 7.DVI 8.USB1.TV

TV/AV

1. Press TV/AV button on the remote controller,

the following menu will appear on the screen.

(USB only displays on the models that have USB funtion)

English-16

Enter

A

B

C

Picture Mode

Advanced

User

Brightness

Contrast

Color

Sharpness

Tint

Picture

50

0

Brightness

Contrast

Color Temp

Red

Green

Blue

Enter

A

B

C

Advanced

Picture

50

Enter

A

B

C

Picture Mode

Advanced

User

Brightness

Contrast

Color

Sharpness

Picture

50

CH+

CH-

VOL- VOL+MENU

Picture quality setup

Picture quality can be adjusted in any channel.

The picture quality on the screen can be adjusted

as follows:

1.Press Menu button until the following menu

appears on the screen:

TV/AV1//AV2/S-Video menu:

Note: Tint option of Menu will appear only in

NTSC system program.

YUV YCbCr,YPbPr /USB menu:

D-SUB menu:

User

English-17

DVI menu:

Picture quality adjust

Picture Advanced

Adjust

A

B

C

A

B

C

AAA Windows

Nature

Full

Standard

OFF

Display Mode

Color Temp

DNR

A

B

C

Brightness

Contrast

Color Temp

Red

Green

Blue

Enter

A

B

C

Picture

50

AAA Windows

Nature

Full

Standard

Display Mode

Color Temp

Picture Advanced

Adjust

AAA Windows

Nature

Full

Display Mode

Picture Advanced

Adjust

CH+

CH-

VOL- VOL+MENU

2. Press VOL+ button to enter Picture menu on which

the current option is in red. Press CH+/- to select desired

item.

3. After one item is designated, press VOL-/+ button to

adjust.

4. Repeat step 2 and 3 until satisfactory picture quality is

achieved. 8 seconds after the latest operation, the menu

disappears from the screen automatically. The menu exit

can also be realized by manual operation.

5. If advanced menu is available, enter the advanced menu

as follows:

TV/AV1/AV2/Svideo/YUV(YCbCr) advanced menu:

YUV (YpbPr)/USB advanced menu

D-SUB advanced menu

User

Page is loading ...

Haier L32V6-A8 Owner's manual

Haier L32V6-A8 Owner's manual

Related papers

Other documents