Side AV terminal
S-video input terminal: Special video S-VIDEO AUDIO: L/MONO Track L/MONO ,R Track R
AV output terminals: VIDEO AUDIO L/MONO Track L/MONO ,R Track R
AV2 input terminals MONITOR : VIDEO AUDIO :L/MONO Track L/MONO ,R Track R
Av1 input terminals MONITOR :VIDEO AUDIO :L/MONO Track L/MONO ,R Track R
DVD component terminals:
Interleaved signal Y C
b Cr AUDIO L/MONO Track L/MONO ,R Track R
Progressive signal YPb Pr AUDIO L/MONO Track L/MONO ,R Track R
HDTV input terminals: YPb Pr terminal AUDIO L/MONO Track L/MONO ,R Track R
D29FV6 , D34FV6 Model
VGA input terminal
D29FV6 Model
Position of Buttons and Plug-ins
Front and Side panel
MENU
Volume up/ down
Channel position up/down
TV/Video
(input selector
Infrared receiver
Power indicator
Power switch
Back panel
D34FV6 Model
Antenna input
AV output terminals
AV2 input terminals
AV1 input terminals
DVD component terminals
HDTV input terminals
S-video input terminal
VGA input terminal
Antenna input
AV output terminals
AV2 input terminals
AV1 input terminals
DVD component terminals
HDTV input terminals
S-video input terminal
1.When the S-video terminal and the Video 1 terminals are connected
at the same time, the S-video terminal is preferential.
2.When the side AV is connected, please select the Video 2 terminal.
DVI IN
DVI input terminal
DVI IN
DVI input terminal
CH+
CH-
VOL- VOL+
MENU
SCAN
SWAP
18
B/G
144MHz
NORMAL
8
B/G
144MHz
NORMAL
18
B/G
144MHz
NORMAL
Program swap
1. Suppose the channel number
you used just now is 8 and the
channel number you are using
is 18 (as shown in the figure).
2. If you want to return to the
last watched program channel
8, you can simply press the
SWAP button.
3. If you want to return to
channel 18, press the button
again. Through this function,
you can easily change
between the channel you are
using and the channel you
used last time.
Auto program scan
1. Press the SCAN button to
scan through all the memorized
TV channels. The TV set screen
displays 12 pictures at the same
time. Press the S.STD button to
scan next page, and press the
P.STD to scan last page.
2.Press the CH+/- buttons and
VOL-/+ buttons to select the
program that you desired, and
press the MENU button to
confirm.
Watching TV Programs (continued)
Swap function enables quick swap to the last watched program.
Auto scan function enables automatic successive scanning of the programs in memory
with (There are 12 pictures display on the screen at the same time)."OFF" skip status
Program swap and auto scan functions
CH+
CH-
VOL- VOL+
MENU
CH+
CH-
VOL- VOL+
MENU
CH+
CH-
VOL- VOL+
MENU
Prog NO. 008
Skip OFF
Sound Sys. B/G
Fine Tune
Search
Auto Search
TUN.
Search 001
125.00MHz
CALL
After searching (Continued)
Press the CH+/- buttons to check channels.
If the colour or sound is abnormal in a certain channel, it may be
because that the colour or sound system has not been set
properly, then, you may adjust it to proper system (Refer to
page 8).
TUNE
Tuning (Continued)
Search
Search
1
B/G
144MHz
NORMAL
1. Press the CH+/- buttons or Direct
select button to select the desired
channel number.
2. Press the TUNE button, the tuning
menu will appear on the screen.
( For example, the auto search mode I.)
. Press the CH+/- buttons to
move the indicator to "Search".
Prog NO. 008
Skip OFF
Sound Sys. B/G
Fine Tune
Search
Auto Search
TUN.
4. Press the VOL+ or VOL- buttons,
the TV set will begin to search up or
down, when the TV set has searched
a program, the TV set will stop
searching. If the program is not the
one you need, you can press the
button again, let the TV set continue
to search until it has searched the TV
signal you need.
Note:
Usually, five seconds after the channel has been changed, the channel
number will disappear automatically. If you want to know which channel
you are watching, just press the CALL button once.
CH+
CH-
VOL- VOL+
MENU
CH+
CH-
VOL- VOL+
MENU
SOUND
SOUND
1. Press the SOUND button, the
Sound menu will appear on the
screen.
. Press the CH+/- buttons to move
the indicator to "Sound Effect".
. Press the VOL+ button to
sub-menu.
. Press the CH+/- buttons to select
the desired option, then the sound effect of the TV set turn to the
sound effect selected. Press MENU button to exit the sub-menu.
Convenient Picture and Sound Controls (Continued)
Surround effect chip has been employed to form a vivid and real space surround sound
effect.
Sound Effect, Surround and Mute functions
SOU.
Treble 50
Bass 50
Balance 50
Sound Effect
Surround ON
Stereo
V.SRS
Mono
Sound Effect function
There are Stereo, V.SRS and MONO sound effect for the
TV set. You may select the desired option.
SOU.
Treble 50
Bass 50
Balance 50
Sound Effect
Surround ON
Surround Function
1. Press the SOUND button, the
Sound menu will appear on the
screen.
. Press the CH+/- buttons to move
the indicator to " Surround ".
. Press the VOL-/+ buttons to turn
the " Surround " function ON.
How to use the Mute function
When you want to listen to the sound nearby, or when you are
answering the telephone, or talking with your friends, you may use
the mute function.
1. Press the MUTE button once, a
sign of mute will appear on the
screen, and then the sound will be
eliminated to half; press the MUTE
button again the sound will be
eliminated completely .
2. Press the volume button or
press the MUTE button again,
and the sound will be recovered.
CH+
CH-
VOL- VOL+
MENU
CH+
CH-
VOL- VOL+
MENU
TIME
TIME
Time Set Up Function(continued)
Sleep and Remind Prog. Functions
Sleep function
TIME
Clock 18:18
On Time 18:00
On Prog. 008
Off Time --:--
Sleep 120
Remind Time --:--
Remind Prog. 001
The TV set have 18 sections option
(each section has a time interval of 10 minutes).
for sleep timer function
1. Press the TIME button, the
Time menu will appear on the
screen.
. Press the CH+/- buttons to move
the indicator to " Sleep ", then press
the VOL-/+ buttons to adjust.
. Press the VOL-/+ buttons to adjust.
Remind Prog. Function
TIME
Clock 18:18
On Time 18:00
On Prog. 008
Off Time --:--
Sleep 120
Remind Time 19:00
Remind Prog. 001
TIME
Clock 18:18
On Time 18:00
On Prog. 008
Off Time --:--
Sleep 120
Remind Time 19:00
Remind Prog. 018
With Remind Prog. function, the TV set can automatically
change a preset program in a preset time .
1. Press the TIME button, the
Time menu will appear on the
screen.
. Press the CH+/- buttons to move
the indicator to " Remind Time ",
then press the VOL-/+ buttons to
adjust (For example, 19:00).
. Press the CH+/- buttons to move
the indicator to " Remind Prog. ",
then press the VOL-/+ buttons to
adjust (For example, 18).
CH+
CH-
VOL- VOL+
MENU
FUNCTION
Select Switch on mode
Set Up Function(continued)
Select Switch on mode
There are some kind of Switch on mode, such as CURTAIN, OFF,
FADE OUT , etc. You can choose one you need.
Language English
Color Sys. Auto
Prog. Sort
Amusement
Special
RGB Sound
FUN.
Search Mode Ordinal
Curtain Mode Off
Screen Saver Off
Tilt 0
1. Press the FUNCTION button,
the Function menu will appear on
the screen.
. Press the CH+/- buttons to move
the indicator to " Special ".
. Press the VOL+ button to
sub-menu.
. Press the CH+/- buttons to move the indicator to " Curtain Mode ",
then press the VOL+ button to select the desired Switch on mode.
Set Up Function(continued)
The pictures by DV recorder and Snapshot functions are be saved temporarily. After
powering off or switching off the pictures will be cleared away.
DV Recorder, Snapshot function and Screen Display
DV
Recording
3/8
Menu Save
Other Cancel
DV STILL
SNAPSHOT
CALL
DV Recorder function
1. On the TV,AV,S-VIDEO, status,press the DV button
to startup the DV function,at the
same time the screen display
.
YCbCr
" Recording "
2. Press the DV button again to
stop the DV function,and then
go on playing.
Note:
The TV set will exit the recorder
status automatically to play the
TV program after the Memory full.
Snapshot function
1. On the TV,AV,S-VIDEO,
status,press the SNAPSHOT
button to still the current picture,
at the same time the screen
display and the
tips.
YCbCr
" DV STILL "
2. Press the MENU button to
save the pictures,and press
other button to play the program.
3. When press the MENU button, the screen display
3/8 OK after saving.
" "
Note:
The 3/8 show that the capacity total is 8 , and 3 is
used.
Screen Display
Press the CALL button to display the currnet channel
number, system ect.
Press the CALL button again to
exit the screen display.
3
B/G
FM MONO
NORMAL
CH+
CH-
VOL- VOL+
MENU
CH+
CH-
VOL- VOL+
MENU
Set Up Function(continued)
DV Playing Function
Play
DIGITAL
Playing the recorder
1. Press the DIGITAL button,
the DIGITAL menu will appear on
the screen.
2. Press the CH+/- buttons to move
the indicator to " DV Play ".
. Press the VOL+ button to
sub-menu, and then press the
CH+/- buttons to move the indicator
to " DV ".
. Press the VOL+ button to
play the recorder.
Note:
If the recorder is vacant, the
.
" No
DV " will show on the screen, and
then renturn to the playing status
Note:
1) On the Playing status, press the MENU button to pause, and
then press the MENU button again to go on playing.
2)Press the 0 button to delete the snatch.
3)Press the CH+/- buttons to select in turn the playing velocity:
, , and .
Press the
X2 X4 X18 X16
X 1/2 X 1/4 X 1/18 X 1/16
CH+/- buttons to select in turn the playing velocity:
, , and .
4) Press the CAL./EXIT button to exit.
DIG.
Digital Bass On
DV Play
Comb Filter On
SVM On
DNR Off
D.Album
DV
CH+
CH-
VOL- VOL+
MENU
CH+
CH-
VOL- VOL+
MENU
CH+
CH-
VOL- VOL+
MENU
CH+
CH-
VOL- VOL+
MENU
FUNCTION
FUNCTION
World Clock and Calculator function
Set Up Function(continued)
FUN.
Language English
Color Sys. Auto
Prog. Sort
Amusement
Special
RGB Sound
World Clock function
World Clock
Set Time
Set Date 2004 / 1 / 1 / 13 11
Local Zone Beijing
Time Zone Date Time
1. Press the FUNCTION button,
the Function menu will appear on
the screen.
2. Press the CH+/- buttons to move
the indicator to " Amusement "
ress the VOL+ button to sub-menu.
, then
p
. Press the CH+/- buttons to move
the indicator to " Calendar ", and then
press VOL-/+ buttons to confirm.
. Press the CH+/- buttons and the
VOL-/+ buttons to adjust the option,
to demand the desired date and zone.
FUN.
Language English
Color Sys. Auto
Prog. Sort
Amusement
Special
RGB Sound
7th.Star
Jumper
Tetris
World Clock
Paint
Calculator
Calculator function
1. Press the FUNCTION button,
the Function menu will appear on
the screen.
. Press the CH+/- buttons to move
the indicator to " Amusement ".
. Press the CH+/- buttons to move
the indicator to " Calculator ", and
then press VOL-/+ buttons to
confirm.
Calculator
0.
CE
. Press the CH+/- buttons and the
VOL-/+ buttons to select the option,
and press the MENU button to
confirm.
Tip:
You can press the digital button to input the numbers directly.
7th.Star
Tetris
Jumper
World Clock
Calculator
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/
