Haier L32A1A Owner's manual

Category
LCD TVs
Type
Owner's manual
Please READ this manual carefully
before operating the unit, and keep
it for future reference.
TFT-LCD COLOUR TELEVISION RECEIVER
OWNER'S MANUAL
This User's Manual is applicable for the following models:
L26V6-A8,L26V6-A8K,L32V6-A8,L32V6-A8K,L37V6-A8,L37V6-A8K,
L42V6-A8,L42V6-A8K,L32A9A,L32A9A-A,L32A1A,L32A1A-A
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Warning
*To avoid electric hazards, it is strongly suggested that the back cover not be opened, as
there is no any accessory inside the casing.
*If necessary, please contact authorized after-sales services.
*A lighting flash mark in a triangle: A potentially hazardous situation, which, if not avoided,
could result in serious injury by high voltage.
*An exclamation mark in a triangle: Major part or accessory of which technical specifications
must be followed if it is to be replaced.
Warning:
To avoid fire or electric hazards, never place your television
receiver in an area with heavy moisture. Attention should be
paid to avoid accidental scratches or impacts onto the LCD
screen.
*Please read this manual carefully before using your television and keep this
manual in a good place for future reference.
*To achieve the best performance of your television, read this User's Manual
carefully and properly store it for future reference.
*Information of screen displays and figures in the User's Manual may vary due
to technical innovations.
Caution:
Unauthorized disassembly of this product is prohibited.
English-1
Table of Contents
.........................................................................................2
...............................................................................................4
.......................................................................................4
...................................................................................5
........................................................................................6
...........................................................................................7
...............................................................................8
...............................................................................................9
.............................................................................................9
............................................................................................................9
........................................................................................9
......................................................................................................10
.......................................................................11
..........................................................................................11
............................................................................................12
...............................................................................................12
...............................................................................13
................................................................................................15
...................................................................................16
..............................................................................................18
.............................................................................................19
.........................................................................21
................................................................................................22
........................................................... 23
...............................................................27
.........................................................................28
...............................................................................................29
............................................................................................30
Safety precautions
Keys and ports
Front control panel
Side AV control panel
Rear terminal row
Remote controller
Keys of remote controller
Operation instructions
Power On/Off
Suspend mode
Menu
Menu exit memory
Preset TV program
TV input
Automatic program storage
Channel search
Program swap
Program edit
Program play
How to select program
AV1/AV2/S-Video/YUV/D-SUB/DVI/USB play
Input option
Picture quality setup
Picture quality setup
Sound adjust
Sound adjust
System setup
System setup
Other functions
Position and phase adjust
Timer setup
Stream media playing system(only for the models that have the USB functions)
Stream media playing system
Connection of external AV devices
Connected to PC as monitor
Specifications
Troubleshooting
.........
Note: There is only one AV in L32A9A,L32A1A,L32A9A-A and L32A1A-A, instead of AV1 and AV2 .
That means, all AV1 and AV2 appearing in this manual should be one AV in these four models.
English-2
Safety precautions
The product should be tightly fixed to
avoid drop damages and even fire.
To avoid fire hazards, do not use this
product under direct sunlight or closely
to heat sources.
Do not locate the product close to water
or oil, which may cause fire hazards.
Unplug the power supply and antenna of
the product when there is a rainstorm,
especially thunderstorm.
Do not use damaged or worn electric
plugs, and keep electric cord away from
heat sources to avoid electric shocks or
fire hazards.
Do not connect excessive sockets in
parallel or share the same socket by
multiple plugs to avoid fire hazards.
The product must be placed on a solid
and stable surface to avoid collapse.
Unauthorized disassembly of the television
is prohibited to avoid electric shocks or fire
hazards. Contact authorized after-sales
service if technical service is needed.
Keep the product away from a transformer
or heat source to avoid fire hazards.
Disconnect the product from power supply
and contact authorized after-sales service
if abnormal sound is heard in the product.
English-3
Don't use or store inflammable
materials near the product to avoid
explosion or fire hazards.
Don't place the product in a humid area to avoid
fire hazards.
Safety precautions (continued)
The antenna of the product should
be away from electric cable to avoid
electric shocks.
Never touch the plug when your hand is wet
as this might cause electric shocks.
Always make sure that the television
is well plugged as poor electric
connection might cause fire.
When antenna is used, measures should be
taken to prevent water from flowing down along
the cable into the television.
Unplug the television, use soft fabric,
never chemicals, if you are going to
make cleaning of the product. Make
sure that no water drops in the product.
The plug and electric cable must be kept
clean to avoid electric shocks or fire hazards.
Disconnect the television from power
supply and antenna when there is a
rainstorm or thunderstorm to avoid
electric shocks or fire hazards.
Disconnect the television from power
supply to avoid electric shocks or fire
hazards in a long vocation.
English-4
1.MENU: menu display
2.TV/AV: input source select
3.P+/- : program plus and minus, menu options
4.V+/V-: volume increase and decrease, menu reset and entry
5.POWER: DC ON/OFF
6.USB interface (only for the models that have USB function)
7.Remote indicator: in red when standby mode
8.Remote control signal receive window
Keys and ports
Front control panel
26", 32" and 37" Series(not include L32A9A,L32A1A,L32A9A-A and L32A1A-A)
1
MENU
P-
P+
TV/AV
V-
V+
POWER
2
3
4
5
6
7
MENU TV/AV
P- P+ V- V+
POWER
1 2 3 4 5 67
1.MENU: menu display
2.TV/AV: input source select
3.P+/- : program plus and minus, menu options
4.V+/V-: volume increase and decrease, menu reset and entry
5.POWER: DC ON/OFF
6.Remote indicator: in red when standby mode
7.Remote control signal receive window
English-5
Keys and ports
42" Series
AV IN
(AV2 IN)
VIDEO
L
AUDIO
R
POWER
(AV2 IN)
Side AV control panel
26", 32" and 37" Series
Audio R
Audio L
Video
USB port
(
)
Only for models that
have USB function
Video
Audio L
Audio R
Power ON/OFF
Plug
1.Remote control signal receive window
2.Remote indicator: in red when standby mode
3.MENU: menu display
4.VOL+/VOL-: volume increase and decrease, menu reset and entry
5.CH+/CH- : program plus and minus, menu options
6.TV/AV: input source select
7.POWER : DC ON/OFF
42" Series
1
2
3
4
5
6
7
MENU
VOL-
VOL+
CH-
CH+
TV/AV
(Not include L32A9A,L32A1A,L32A9A-A
and L32A1A-A)
Keys and ports
English-6
1.Power: Power ON/OFF
2.Power input
3.DVI IN: digital RGB input
4.D-SUB IN: computer input
5.YUV (YCbCr,YPbPr) IN: video component input
6.AUDIO IN: external YUV (YCbCr,YPbPr) audio input
7.S-VIDEO IN: S terminal input
8.VIDEO IN: external video input (AV1)
9.AUDIO IN: external S-VIDEO/VIDEO input
10.AUDIO IN: external D-SUB/DVI input
11.Earphone port
12.ANT: antenna input
13.AUDIO OUT: audio output
Rear terminal row
Y
U
V L R
V
L
R
L
R
ANT.
DVI IN
D-SUB IN
YUV IN AUDIO IN
S-VIDEO
IN
VIDEO IN
AUDIO IN AUDIO IN
1.AUDIO OUT: audio output (to external speaker)
2.DVIIN: digital RGB input
3.D-SUB IN: computer input
4.YUV (YCbCr,YPbPr) IN: video component input
5.AUDIO IN: external YUV (YCbCr,YPbPr) audio input
6.S-VIDEO IN: S terminal input
7.VIDEO IN: external video input (AV1)
8.AUDIO IN: external S-VIDEO/VIDEO input
9.AUDIO IN: external D-SUB/DVI input
10.Earphone port
11.ANT: antenna input
Y
U
V L R
V
L
R
L
R
ANT.
DVI IN
D-SUB IN
YUV IN AUDIO IN
S-VIDEO
IN
VIDEO IN
AUDIO IN AUDIO IN
L
R
AUDIO OUT
26", 32" and 37" Series
42" Series
AUDIO OUT
Note: 1. The sequence of 1.POWER and 2.Power input is as follows ( )
in L32A9A,L32A1A,L32A9A-A and L32A1A-A
2. The 13 AUDIO OUT terminal is only available in models L32A9A and
L32A9A-A
English-7
Remote controller
Precautions
Battery loading
3
2
1
1.Slide open the cover of the battery compartment on the back of
the remote controller.
2.Load two 5# alkaline batteries in the compartment. (plus and
minus poles to respective mark)
3.Replace the cover of the battery compartment.
Make sure that there is no
obstacle between the remote
controller and television set.
As strong light may interfere the
signals, change your position to
operate the remote controller if
the television cannot be turned
on or off as you expect.
Keep the remote controller
away from heat source or
humid area to ensure
effective performance of
the remote controller.
Make sure that two 5# 1.5V alkaline
batteries are loaded. The batteries
must be of the same type. The batteries
must be located properly. The batteries
are not rechargeable.
English-8
The remote controller cannot be operated unless the batteries are
properly loaded.
1.FAV (Favorite)
2.I/II (NICAM)
3.Display
Display ON/OFF
4.Power ON/Standby
5.Digital TV program option
6.USB signal swap
()
7.Q. View (Quickly view)
To former program
8.Sleep
Displaying sleep time, adjustable
by every press
9.Digits
Program direct option
10.PSM (Picture mode option)
11. SSM (Sound mode option)
12.TV/AV swap
13.Mute
14.Program up and down, sound
increase and decrease, menu,
Menu reset
15.Up/down
16.Left/right
17.Prev. (Previous page)
18.Next (Next page)
19.Pause
20.ENTER(Play)
21.Swap
22.Return
Only for some models
Note:
This User's Manual covers the functions of the remote controller, including P+/-
(CH+/-), V-/+(VOL-/+), MENU, TV/AV and POWER keys for control of program up,
program down, volume decrease, volume increase, menu, TV/AV and power
ON/OFF.
Keys of remote controller
USB
Only for the models that
have USB function
DISPLAY
-/--/---
USB
CH+
FAV. POWER
Q.VIEW SLEEP
PSM
TV/AV MUTE
CH-
VOL- VOL+MENU
UP LEFT
PREV.
NEXT
DOWN
RIGHT
PAUSE ENTER
SWAP EXIT
English-9
Operation instructions
Menu
Suspend mode (ON/OFF)
If Suspend Mode is activated, under TV/AV1/AV2/
S-Video/YUV/D-SUB/DVI/USB status, 5 minutes
later after no signals are input, the television will
enter standby status automatically.
-/--/---
USB
DISPLAY FAV. POWER
Q.VIEW SLEEP
CH+
CH-
VOL- VOL+MENU
Power ON/OFF
1.Switch on power supply (indicator in red)
2.If the television screen does not light, press
Power button on the remote controller or the
television.
3.If pause is needed, press Power button on the
remote controller or the television.
4.Disconnect the power supply or unplug the
television if it is intended to completely cease the
television performance.
1.MENU: main menu entry, menu exit or return to
next higher level menu.
2.VOL+: next lower level menu entry.
3.VOL-/+: submenu options.
4.CH+/-: option of next higher/lower level menu.
Menu exit memory
When menu parameter is to be modified, the set
picture and sound status and preset program will
be remembered at menu exit.
English-10
TV input
Note:
Password must be entered when operating menu
tuning. The delivery password of this television is
0000.
Changing Password
Please Enter Password
Please Enter New Password
Press digit button on the remote control to enter
the digits.
Please Confirm New Password
2.AV1 3.AV2 4.SVideo 5.YUV 6.D-SUB 7.DVI 8.USB1.TV
A
B
C
Exchange
Tuning
Enter
Prog. Edit
Search
Auto Search
Change Password
TV/AV
CH+
CH-
VOL- VOL+MENU
Preset TV program
1.Press TV/AV button on television or remote
controller and the menu appears on the screen
( USB only displays on the ). models that have USB function
2.Press digit button 1 to swap to TV input terminal.
3.Press Menu button and then CH+ or CH- button
until the following menu appears on the screen.
English-11
Channel search
1.Press CH+/- button to change frequency bands.
2.Press VOL+ or VOL- to scan channel up or down.
Preset TV program
Automatic program storage
Auto Search
BAND VHF-L
FREQ. 188.16 MHz
Prog. 18
Cancel
Search
BAND VHF-L
FREQ. 188.16 MHz
Prog. 18
Cancel
<MENU>
<MENU>
CH+
CH-
VOL- VOL+MENU
CH+
CH-
VOL- VOL+MENU
1.Press CH+/- button on preset menu to select
automatic scan.
2.Press VOL+ button on the remote controller for
automatic scan of programs with higher level.
The program on desired channel will be saved.
If excessive channel signals of unwanted programs
are received in local area, manual search function
is recommended.
After preset menu appears on the screen, press VOL+
button on the remote controller to enter menu manual
search mode as follows:
When a desired television program has been
received by manual scan, the television will cease
scanning automatically and save the program with
current program number. Press the Menu button on
the television or remote controller to return to preset
menu.
English-12
1. Current program
Press VOL-/+ or digit button on the remote
controller for current program option.
2. Exchange program
Press VOL-/+ or digit button on the remote
controller for the program number to be exchanged.
3. Exchange
After current program and exchange program are
confirmed, select Exchange option and press
VOL+ button to exchange programs (OK on display).
Program edit
Program swap
Note: Sound system can be adjusted in sequence
of D/K, B/G, M, I, L and Auto.
Program swap
Exchange
Current Prog. 010
Exchange Prog. 020
Exchange OK
Prog. Edit
Current Prog.
OFF
OFF
D/K
Skip
Prog. Lock
Sound System
Fine Tune - +
CH+
CH-
VOL- VOL+MENU
CH+
CH-
VOL- VOL+MENU
Press CH+/- button on the remote controller or
television for Exchange in preset menu. Press
VOL+ button to enter the submenu.
Press CH+/- button in preset menu for program
edit. Press VOL+ button to enter the submenu as
follows:
English-13
Program play
How to select program
Preset program
1.Select desired program
Select buttons in sequence
Press CH+/- button for program option. (Note:
If Skip mode is activated, the program will not
appear.)
Select buttons directly
If program number 1~9 is selected, press digit
1~9 directly.
If two-digit or 3-digit programs are selected,
press -/--/--- button twice or trice. When icon --
or --- appears on the screen, press digit 0~9
program numbers.
If selected channel program is set at Lock on mode and
no password has been entered after initiation of the
television, the screen will indicate require password
entry. If wrong password is entered, channel selection
will fail and previous program will still stay on the screen.
The program locking password can be modified in the
preset menu and previous password will be required.
CH+
CH-
VOL- VOL+MENU
DISPLAY FAV. POWER
-/--/---
USB
Q.VIEW SLEEP
1. Current program
Press VOL-/+ or digit button on the remote controller
for current program option.
2.Skip
If current program number is to be cleared, press
VOL-/+ button to set Skip mode.
3.Program lock
If current program number is to be locked, press
VOL-/+ button to set on Prog. Lock.
4. Sound system
If current program sound is to be changed, press
VOL-/+ button and then the sound system will
change in sequence of Auto D/K B/G M I L.
Note: When channels are being scanned, sound
system will be automatically identified and set
according to television signals. If the sound system
is changed by manual operation, the correct sound
might not be broadcast.
5. Fine tune
If there is abnormal picture or sound in individual
program, press VOL-/+ button to make fine tune until
satisfactory picture and sound are achieved.
After Fine Tune is activated, AFC will be active for
the program, changing the program number into
yellow color. If green color is desired for the program
number, manually scan the same program.
English-14
DISPLAY
-/--/---
USB
CH+
FAV. POWER
Q.VIEW SLEEP
PSM
TV/AV MUTE
CH-
VOL- VOL+MENU
UP LEFT
PREV.
NEXT
DOWN
RIGHT
PAUSE ENTER
SWAP EXIT
Program play
How to select program (continued)
2. Press VOL+/- button to change sound volume.
3. Press Mute button to silence television sound. If the
same button is pressed again, the sound will resumed.
4. If current program number, color system and sound
system are to be displayed on the screen, press Display
button, and all the related information will appear at
up right corner of the screen. If the Display button is
pressed again, the displayed information will disappear.
5. Sound mode
If the SSM button is pressed again, the sound of
programs will change in following sequence:
Standard News User Music Standard
It is possible for users to select desired sound mode for
different television programs.
6. Picture mode
Press the PSM button on the remote controller, the
picture on the screen will change in sequence as follows
for user's option.
Bright Standard Soft User Bright
7. Off-time
a) Every press of Sleep button, the timer will be set in
the following sequence:
Off 5 15 30 60 90 120 150 180 Off
b) If remaining time of set timer is to be displayed, press
the Sleep button once.
8.NICAM
Press of the I/II button will result in fast swap of NICAM
function (bilingual or stereo) of current program. Under
AV mode, single tune (R or L) and stereo channel can be
selected.
9.Quickly view
Press Q. View button to resume previous program.
10.Fav. Folder
a)Press the shortcut key of Fav. folder until icon is on
display, then current program will be added to the folder.
b)Press the shortcut key to open FAV folder.
c)Press CH+/- button for selection of programs in FAV
folder. Then press VOL+ button to confirm the program.
English-15
AV1/AV2/S-Video/YUV/D-SUB/DVI/USB play
Input option
2. Press the digit button for swap of relative terminal.
2.AV1 3.AV2 4.SVideo 5.YUV 6.D-SUB 7.DVI 8.USB1.TV
TV/AV
1. Press TV/AV button on the remote controller,
the following menu will appear on the screen.
(USB only displays on the models that have USB funtion)
English-16
Enter
A
B
C
Picture Mode
Advanced
User
Brightness
Contrast
Color
Sharpness
Tint
Picture
50
50
50
50
0
Brightness
Contrast
Color Temp
Red
Green
Blue
Enter
A
B
C
Advanced
Picture
50
50
50
50
50
Enter
A
B
C
Picture Mode
Advanced
User
Brightness
Contrast
Color
Sharpness
Picture
50
50
50
50
CH+
CH-
VOL- VOL+MENU
Picture quality setup
Picture quality can be adjusted in any channel.
The picture quality on the screen can be adjusted
as follows:
1.Press Menu button until the following menu
appears on the screen:
TV/AV1//AV2/S-Video menu:
Note: Tint option of Menu will appear only in
NTSC system program.
YUV YCbCr,YPbPr /USB menu:
D-SUB menu:
User
English-17
DVI menu:
Picture quality adjust
Picture Advanced
Adjust
A
B
C
A
B
C
AAA Windows
Nature
Full
Standard
OFF
Display Mode
Color Temp
DNR
A
B
C
Brightness
Contrast
Color Temp
Red
Green
Blue
Enter
A
B
C
Picture
50
50
50
50
50
AAA Windows
Nature
Full
Standard
Display Mode
Color Temp
Picture Advanced
Adjust
AAA Windows
Nature
Full
Display Mode
Picture Advanced
Adjust
CH+
CH-
VOL- VOL+MENU
2. Press VOL+ button to enter Picture menu on which
the current option is in red. Press CH+/- to select desired
item.
3. After one item is designated, press VOL-/+ button to
adjust.
4. Repeat step 2 and 3 until satisfactory picture quality is
achieved. 8 seconds after the latest operation, the menu
disappears from the screen automatically. The menu exit
can also be realized by manual operation.
5. If advanced menu is available, enter the advanced menu
as follows:
TV/AV1/AV2/Svideo/YUV(YCbCr) advanced menu:
YUV (YpbPr)/USB advanced menu
D-SUB advanced menu
User
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36

Haier L32A1A Owner's manual

Category
LCD TVs
Type
Owner's manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI