Ameriwood Home 9151026PCOM User manual

Brand: Ameriwood Home

Model: 9151026PCOM

Type: User manual

B349151026PCOM5

9151026PCOM

STOP

1-800-489-3351

Need Parts or Assistance?

WWW.AMERIWOOD.COM/PARTS

If a part is missing or damaged, visit our website or call our toll-free

customer service line. We will gladly ship your replacement parts

FREE of charge.

For prompt, reliable service please have your assembly manual ready.

NOT RETURN PRODUCT TO THE STORE

Individual stores do not stock parts.

or call toll free:

Recommended # of people needed for assembly: 2

(however it is always better to have an extra hand.)

Estimated assembly time is 2 hours.

Se localizan las traducciones españolas en el centro de este

manual.

THIS INSTRUCTION BOOKLET CONTAINS

IMPORTANT

SAFETY INFORMATION. PLEASE

READ AND KEEP FOR FUTURE REFERENCE.

Date of Purchase

___ / ___ / ___

Please Recycle

Recicle Por Favor

B349151026PCOM5

3 /28

Parts

??www.ameriwood.com??

left panel

39118026011

right panel

39118026022

left partition

39118026031

right partition

39118026041

modesty panel

39118026101

desk top

39151026111

right fixed shelf

39118026141

left bottom

39118026151

right bottom

39118026161

left kick

39118026170

right kick

39118026180

left apron

39118026190

right apron

39118026200

front crown molding

39118026210

left lower crown molding

39118026221

right lower crown molding

39118026231

left door

39118026280

B349151026PCOM5

4 /28

Parts

??www.ameriwood.com??

right door

39118026291

pencil drawer front

39118026300

2 pencil drawer sides

39118302310

pencil drawer back

39118302320

keyboard drawer front

39118026330

left keyboard

drawer side

39118026340

right keyboard

drawer side

39118026350

keyboard drawer back

39118026360

keyboard drawer bottom

39118026370

file drawer front

39118026380

left file drawer side

39118302390

right file drawer side

39118302400

file drawer back

39118302410

pencil drawer bottom

K911830280

file drawer bottom

K911830270

left back panel

K911802630

right back panel

K911802640

#A22570

cam lock

qty: 20

#A22510

cam bolt

qty: 20

#A30030

plastic catch

qty: 4

#A70040

50mm grommet

qty: 2

#A80250

shelf support

qty: 3

#A17400

#8-32 X 7/8"

machine screw

qty: 10

#A60500

flap hinge

qty: 2

B349151026PCOM5

5 /28

Parts

??www.ameriwood.com??

#A09130

#4 x 1/2" flat head

screw

qty: 10

#A11080

#6 x 7/16" flat head screw

qty: 22

#A21110

nail

qty: 36

#A53760

drawer

bracket

qty: 8

#A53600

angle bracket

qty: 12

#A15600

drawer screw

qty: 16

#A11600

#6 X 1-1/4" flat head

screw

qty: 8

#A12840

#8 X 1" screw

qty: 8

#A12210

#8 X 1/2" pan head

screw

qty: 66

#A13410

#8 X 1-3/4" flat head

screw

qty: 11

#A60010

hinge

qty: 4

#A56540

extension slide

qty: 1

#A82120

file holder

qty: 2

#A52150

cup pull

qty: 5

B349151026PCOM5

6 /28

Parts

??www.ameriwood.com??

22d

22a

22c

22b

½ turn to fully

lock.

½ se vuelven a

totalmente

cerradura.

Tighten to fully seat. Do not over

tighten.

Apriétese a totalmente asiento. No

haga encima de apriétese.

Proper orientation of cam.

La orientación apropiada de leva.

This illustration shows how the CAM fastening system works.

Esta ilustración muestra el sistema de fijación de leva y como funciona.

Lock

Apretar

#A56030

drawer slide

qty: 2

B349151026PCOM5

7 /28

??www.ameriwood.com??

Insert four CAM LOCKS (1) into the RIGHT FIXED SHELF (N), LEFT BOTTOM (O),

and RIGHT BOTTOM (P) as shown.

x 12

Proper orientation of CAM LOCK

Posición correcta de la cerradura de leva.

B349151026PCOM5

8 /28

??www.ameriwood.com??

x 2

x 3

x 1

Insert two CAM LOCKS (1) and screw two CAM BOLTS (2) into the LEFT PANEL (A) as shown.

Attach one LEFT CABINET MEMBER (22a) to the LEFT PANEL (A) with three SCREWS (15) as shown.

Fasten one ANGLE BRACKET (18) with one SCREW (12) as shown in the detail.

x 1

22a

Proper orientation of CAM LOCK

Posición correcta de la cerradura de leva.

22a

B349151026PCOM5

9 /28

??www.ameriwood.com??

x 2

x 6

x 3

x 1

turn over

de la vuelta

x 1

Attach one LEFT CABINET MEMBER (22a) to the LEFT PARTITION (C) with three SCREWS (15).

Turn the panel over and attach one RIGHT CABINET MEMBER (22b) with three SCREWS (15).

On the same side insert two CAM LOCKS (1), screw two CAM BOLTS (2) and attach one PLASTIC CATCH (3a) with

two SCREWS (12). Fasten one ANGLE BRACKET (18) with one SCREW (12).

22a

22b

22a

x 1

23b

Proper orientation of CAM LOCK

Posición correcta de la cerradura de leva.

B349151026PCOM5

10 /28

??www.ameriwood.com??

Insert two CAM LOCKS (1) and screw four CAM BOLTS (2) into the RIGHT PANEL (B).

Seperate the EXTENSION SLIDE (21) by extending it until it stops, depress the plastic lever and pull apart. Complete this procedure for both slides.

Attach slide to the RIGHT PANEL with three SCREWS (12). Fasten one ANGLE BRACKET (18) with one SCREW (12) as shown.

USE THESE THREE HOLES WHEN ATTACHING SLIDE.

USE ESTOS TRES AGUJEROS AL ATAR LA DIAPOSITIVA.

PLASTIC LEVER

PLANCA DE PLÀSTICO

x 2

x 4

x 1

Proper orientation of CAM LOCK

Posición correcta de la cerradura de leva.

B349151026PCOM5

11 /28

??www.ameriwood.com??

x 2

x 4

x 3

x 6

x 1

turn over

de la vuelta

Attach one RIGHT CABINET MEMBER (22b) to the RIGHT PARTITION (D) with three SCREWS (15).

Turn the panel over and attach one EXTENSION SLIDE (21) with three SCREWS (12). On the same surface insert two CAM

LOCKS (1), screw in four CAM BOLTS (2), and attach one PLASTIC CATCH (3a) with two SCREWS (12). Fasten one ANGLE

BRACKET (18) with one SCREW (12) as shown.

22b

x 1

22b

Proper orientation of CAM LOCK

Posición correcta de la cerradura de leva.

B349151026PCOM5

12 /28

??www.ameriwood.com??

Screw eight CAM BOLTS (2) into the DESK TOP (K).

Attach the FRONT CROWN MOLDING (U) to the DESK TOP (K) with five ANGLE BRACKETS (18) and ten SCREWS (12).

NOTE: If you use the optional hutch (model 9902026PCOM), refer to the model 9902026PCOM hutch

assembly manual to attach the desk top to the hutch assembly. Four holes need to be redrilled into

through holes (only if the hutch is used).

x 10

x 5

x 8

B349151026PCOM5

13 /28

??www.ameriwood.com??

x 4

This step will require the assistance of a second person.

Secure the LEFT PARTITION (C) and RIGHT PARTITION (D) to the MODESTY PANEL (J) with four SCREWS (13).

If assembled correctly, there will be a 1" (2.5cm) spacing between the top edge of the partitions and the top edge of the

modesty panel.

1" (2.5cm)

B349151026PCOM5

14 /28

??www.ameriwood.com??

Align the LEFT PANEL (A) and LEFT PARTITION (C) with the LEFT BOTTOM (O) so that the CAM BOLTS (2) insert into the CAM LOCKS (1). Turn the CAM

LOCKS (1) clockwise to lock in place.

Align the RIGHT PANEL (B) and RIGHT PARTITION (D) with the RIGHT BOTTOM (P) and RIGHT FIXED SHELF (N) so that the CAM BOLTS (2) insert into

the CAM LOCKS (1). Turn the CAM LOCKS (1) clockwise to lock in place.

finished edge

acabado borde

NOTE THE HOLE LOCATIONS.

OBSERVE LAS LOCALIZACIONES DE LOS AGUJEROS

ESA

B349151026PCOM5

15 /28

??www.ameriwood.com??

Align the left and right assemblies with

the DESK TOP (K) so that the CAM

BOLTS (2) insert into the CAM LOCKS (1).

Turn the CAM LOCKS (1) clockwise to

lock in place.

NOTE: Adjust the moldings (S, T, V, W)

for best fit when

attaching them to the unit with the

SCREWS (11).

x 8

NOTE: IF YOU HAVE PURCHASED THE OPTIONAL

HUTCH, YOU NEED TO FOLLOW MODEL 9902026PCOM

ASSEMBLY MANUAL. (THERE ARE FOUR HOLES THAT

MUST BE DRILLED THROUGH TO ATTACH THE DESK

TOP (K) TO THE HUTCH PANELS).

B349151026PCOM5

16 /28

??www.ameriwood.com??

x 3

x 10

Attach the LEFT KICK (Q) to the LEFT PANEL (A), LEFT PARTITION (C), and LEFT BOTTOM (O) with three ANGLE BRACKETS (18) and six

SCREWS 12).

Attach the RIGHT KICK (R) to the RIGHT PANEL (B), RIGHT PARTITION (D), and RIGHT BOTTOM (P) with four angle brackets (18) and

eight SCREWS (12).

Align both KICKS so that the mitered corner is tight by loosening the SCREWS (11) and (12), adjusting and retightening the screws.

B349151026PCOM5

17 /28

??www.ameriwood.com??

With assistance of another person, carefully stand the unit upright.

Position the LEFT BACK PANEL (RR) so the bottom edge of the back panel is even with the bottom edge of the LEFT BOTTOM

(O), and equally spaced side to side. Fasten the LEFT BACK PANEL (RR) to the unit using eighteen NAILS (16).

NOTE: When you begin to nail the back panel to the unit, make sure the unit is square with the back panel

and nail straight through into the back edges of the unit.

Repeat this procedure to fasten the RIGHT BACK PANEL (SS) to the unit.

Por favor asegúrese que las Parte de atrás se atan

firmemente. Todos los clavos deben manejarse en las

partes recto y deben apretarse firmemente. El fracaso para

hacer para que podría causar inestabilidad, derrumbamiento

del producto, y/o la lesión seria.

ADVERTENCIA

Please make sure that Back Panels are attached securely.

All nails must be driven into the parts straight, centered and

tightened firmly. Failure to do so could cause instability,

product collapse, and/or serious injury.

WARNING

x 36

raw surface

superficie cruda

IMPORTANT!

THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT AND MUST BE INSTALLED PROPERLY.

IMPORTANTE!

EL PANEL TRASERO ES UNA PARTE ESTRUCTURAL DE ESTA UNIDAD Y DEBE SER INSTALADO CORRECTAMENTE.

B349151026PCOM5

18 /28

??www.ameriwood.com??

x 4

x 8

x 2

x 1

Attach one LEFT DRAWER RUNNER (22c) to the PENCIL DRAWER SIDE (EE) with two SCREWS (15) and two

DRAWER BRACKETS (17) with two DRAWER SCREWS (9).

Attach one RIGHT DRAWER RUNNER (22d) to the other PENCIL DRAWER SIDE (EE) with two SCREWS (15) and two

DRAWER BRACKETS (17) with two DRAWER SCREWS (9).

Attach the drawer members of the EXTENSION SLIDES (21) to the LEFT and RIGHT FILE DRAWER SIDES (MM &

NN) with two SCREWS (12) and two DRAWER BRACKETS (17) with two DRAWER SCREWS (9) each.

22c

22d

plastic lever

palanca plstica

plastic lever

palanca plstica

22c

22d

B349151026PCOM5

19 /28

??www.ameriwood.com??

x 2

x 3

x 8

x 4

Attach the PENCIL DRAWER SIDES (EE) to the PENCIL DRAWER FRONT (DD) with four DRAWER SCREWS (9).

Attach the LEFT and RIGHT FILE DRAWER SIDES (MM and NN) to the FILE DRAWER FRONT (LL) with four DRAWER

SCREWS (9).

Attach one CUP PULL (19) with two BOLTS (6) onto the PENCIL DRAWER FRONT (DD) and the FILE DRAWER FRONT (LL).

Insert SHELF SUPPORTS (5) into each of the drawer fronts.

B349151026PCOM5

20 /28

??www.ameriwood.com??

x 4

Slide the PENCIL DRAWER BOTTOM (PP) down the grooves in the PENCIL DRAWER SIDES (EE) until it is

tight against the PENCIL DRAWER FRONT (DD).

Attach the PENCIL DRAWER BACK (FF) with four SCREWS (10).

finished surface

superficie terminada

Page is loading ...

Ameriwood Home 9151026PCOM User manual

Ameriwood Home 9151026PCOM User manual

Ameriwood Home 9151026PCOM User manual

Related papers

Other documents