Blade Stream Quick start guide

Brand: Blade

Model: Stream

Type: Quick start guide

QUICK START INSTRUCTION FOR BLADE IPTV RECEIVER

TURNING ON THE RECEIVER FROM STANDBY

Using the red “power” button at the top right of the remote

control to switch on from standby.

(The blue light at the front of

the receiver will change from a bright blue (standby) to a dim

blue which is on).

SELLECTING A CHANNEL

Press the “OK” button on the remote; this will bring up 14

names of the first page of the channel list. Use the “UP” or

DOWN” button of the remote control to move through the channel list. (You

can also move up or down a page at a time with the “PgUp or

PgDown buttons. When you have the channel you wish to view,

then press the OK button on the remote. You can also change

channels using the “channel + or – buttons, OR just enter the

channel number.

CHANGING FROM TV CHANNELS TO RADIO CHANNELS

To go to the Radio channels, select “MENU” then use the “<” or “>”

buttons and move to the Icon RADIO. Then press OK button,

and use up or down button to select.

To return to the TV channels, MENU – “<” or “>” until you see

the Icon TV, and select ALL.

EPG (Electronic Program Guide)

You can check what programs are coming to view buy using

the “EPG guide” go to the channel you want the information, and press “>”

on the remote. This takes you to the TV Guide.

Push OK, then push “F1 (red button on the remote) then select down to

“LIST” – for full EPG press right on selected channel.

You can set a “reminder” for a program to view later. Press the “GREEN”

button on the remote, and then select the program you wish to view later.

When the time of the selected program is reached, a message will inform

you that it is about to start, you can press OK and this will change the

viewing to this program and channel.

VOLUME CONTROL

As well as being able to adjust the volume on the TV you can also adjust

the volume on the Blade receiver.

To increase or decrease the sound level, use the “volume +” or “volume – “

on the remote.

POSSIBLE LOW INTERNET SOLUTION

It is possible at peak times that your internet speed goes very low.

This receiver has the ability to still work down below 1meg. If you are

experiencing "buffering" press the menu button and you will see 3

options. ALL/ENGLISH/LOW SPEED if you select the low speed option

you will have all the channels showing which should work with a low

internet speed. The disadvantage of selecting this option is that the

picture quality is reduced.

At any time you can go back to viewing in normal picture quality by

pressing the menu button and selecting "ALL"

RECORDING A PROGRAM

To be able to record, you will need a "USB" memory stick or a media

storage device. Insert a USB into the front LHS of the receiver. If you

have any pre recorded films or pictures you can play or view your

recordings by pressing MENU and you will see at the bottom of the tv

options. Use the x or x buttons to step though these options.

(TV/VIDEOCLUB/YOU TUBE/RADIO/SETTINGS/APPS

INFOPORTAL/INTERNET/ACCOUNT/MEDIA BROWSER

Move to and select "MEDIA BROWSER" with the OK buttons. This

menu should show you the name of the USB you have inserted at the

front of the receiver, move down to the USB and press OK if you have

anything pre recorded you will see the name, go to the recording and

Press OK, the recording will start to play. You can pause/fast

forward/rewind using the buttons on the remote. At any time Press

exit on the remote.

To record a program ( you must have a USB inserted in the receiver)

press OK then INFO to the EPG TV guide ( go to a channel, use

up/down/left/right and select a program you want to record ( high

lighted in yellow) now press the red "F1" button, check that this is the

program and time you are wanting and move down to "START" then

"OK" you will see a marking in red showing that you have set a

recording. Once recorded, it can be viewed by following the

instructions in the paragraph above. You can also set a "reminder" by

using the green button. This will show on your TV that the program

you have set is about to start.

You can also at any time start to record a channel you are watching

simply by pressing by pressing the F1 (red) button, ( you will be

asked to confirm the recording, move down to "START" and press

"OK" you will see the record symbol at the top RHS of the TV and

showing the record time, you now have the possibility of viewing an

alternative channel at the same time you are recording something

else

TV CATCH-UP

TV-Catch-up allows you to view a program which you may have missed

during the previous days. (Only channels which have the purple clock

showing by the side of the channel number have catch-up)

Press OK to show the channels, then press "INFO" use the left button of

the remove to move back to previously shown programs, you can move up

or down the channel list, go to the channel for the day and time you want to

view ( you will see the channel being selected highlighted in yellow) when

you have chosen your program to view press the "OK" button, the program

will start to play, you can fast forward or rewind or pause the viewing, press

xx button to continue to view.

SELLECTING “FAVORITE” CHANNELS

You may want to create your "favourite channel list. Press the centre

OK button to show channels, move to a channel you want to be in

your favourite list and press the "yellow" button

PLEASE NOTE:

The connection to the TV is by the “HDMI” cable. It is important that

you select on the TV input “HDMI” if you select any other input on the

TV, you will not have any picture or sound

Blade Stream Quick start guide

Blade Stream Quick start guide

Blade Stream Quick start guide

Other documents