Wasp dr5 Owner's manual

DR5 Standard Gun Grip

Package

Please make sure the following contents are in the

gun grip box. If something is missing or damaged,

please contact your Wasp representative.

• DR5 standard gun grip

• Wrist Strap

• Quick Start Guide

Note:

• The gun grip is only applicable to the DR5 with the

bumpers on.

• It is strongly recommended to use the DR5 with

the 6000mAh battery.

Quick Start Guide

V1.0

Assemble with DR5:

1. Place the 2 top corners of the DR5

into the top of the gun grip.

2. Press the bottom of the DR5 into the gun grip.

3. Ensure 2 top corners and 2 hooks of gun grip fit

securely with the DR5.

Step 1

Step 2

Disassembly from DR5:

Slightly pull the 2 hooks of the gun grip and lift

the bottom of the device to remove from the gun grip.

For more information about Wasp products, visit

www.waspbarcode.com.

Caution!

To ensure the unit is working properly, please keep all connectors

away from contaminants such as dust, grease, mud, and water.

Negligence may cause the unit to short circuit, overheat or

may prevent it from communicating.

If the connector is damaged, please ensure the connector is

fully repaired before using the unit to avoid causing the device to

short circuit.