Okina USA MB 7VD Owner's manual

MB-7VD_Rev10212008

Fig2.

Fig4.

MB-7VD

Operational Manual

Wall Mount Bracket

1. Please adhere the paster provided to the surface where

you like to install the bracket on the wall as Fig1.

2. In accordance with the position of 3 holes shows on the

paster to dig 3 holes, and then insert 3 anchors provided

into the holes as shown in Fig2.

3. Fix the bracket holder to the wall by using 3 screws as

Fig3.

4. Take the attached waterproof spacer to aim at the 4 screw

holes on the top plate of the bracket and adhere the

spacer to the top plate as shown in Fig4.

5. Fix the top plate (with the waterproof spacer) to the

bracket holder by using 4 screws as shows in Fig5.

6. Fasten the provided metal plate to the dome camera by 3

screws as Fig6.

7. Mount the dome camera (with the metal plate) to the top

plate of the bracket by 4 screws shown as Fig7.

8. Then the wall mount installation is finished as Fig8.

Fig1.

Fig3.

Fig5.

Fig6.

Fig7.

Fig8.

Please read the Operational Manual

before attempting to use this product.

Download PDF