2. Winco
  3. SVM-8

Winco SVM-8 User manual

  • Hello! I am an AI chatbot trained to assist you with the Winco SVM-8 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
SVM-8 Stainless Steel Food Mill
Instruction Manual
*CAUTION Blades are sharp.
Use care when handling.
ASSEMBLY
STEP 1
Place desired blade, dome side up, in the
bottom of the mill. Blade will sit on the
bottom rim.
STEP 2
Carefully insert the peg of the turning
handle with the hole in the center of the
dome blade.
STEP 3
Press down simultaneously on the sides
with the notches and line up the notches
underneath the hooks in the interior of the
mill’s bowl.
STEP 4
Put desired food in bowl and turn handle.
CLEANING
STEP 1
Press down simultaneously on the sides
hooked under the hooks and turn them out
from underneath the hooks.
STEP 2
Lift out handle with turning blade.
STEP 3
Place hand underneath bowl to take out
carefully or flip over mill on a clean surface
and the blade will fall out.
STEP 4
Use hot water and soap to carefully wash
the mill and blades.
EAST COAST 65 Industrial Road • Lodi, NJ 07644 • Tel. 1.888.946.2682 • Fax 1.888.946.2632
WEST COAST 14950-14952 Valley View Ave. • La Mirada, CA 90638 • Tel. 1.888.946.2652 • Fax 1.562.926.5678
www.wincous.com
/