Winco SVM-8 User manual

SVM-8 Stainless Steel Food Mill

Instruction Manual

*CAUTION Blades are sharp.

Use care when handling.

ASSEMBLY

STEP 1

Place desired blade, dome side up, in the

bottom of the mill. Blade will sit on the

bottom rim.

STEP 2

Carefully insert the peg of the turning

handle with the hole in the center of the

dome blade.

STEP 3

Press down simultaneously on the sides

with the notches and line up the notches

underneath the hooks in the interior of the

mill’s bowl.

STEP 4

Put desired food in bowl and turn handle.

CLEANING

STEP 1

Press down simultaneously on the sides

hooked under the hooks and turn them out

from underneath the hooks.

STEP 2

Lift out handle with turning blade.

STEP 3

Place hand underneath bowl to take out

carefully or ﬂip over mill on a clean surface

and the blade will fall out.

STEP 4

Use hot water and soap to carefully wash

the mill and blades.

EAST COAST 65 Industrial Road • Lodi, NJ 07644 • Tel. 1.888.946.2682 • Fax 1.888.946.2632

WEST COAST 14950-14952 Valley View Ave. • La Mirada, CA 90638 • Tel. 1.888.946.2652 • Fax 1.562.926.5678

www.wincous.com