Cutting Edge 200350PT User manual

Manufacturer’s Warranty:

Non-Warranty: No warranty expressed or implied concerning the use of this product is made by

the manufacturer or seller other than for the purposes indicated on the label. Manufacturer and

seller make no warranty, expressed or implied, concerning the use of this product. User

assumes all risk of loss or damage arising from use, handling or effects thereof.

Use and Care Manual:

SPREADING: A small amount of concentrated Cutting Edge Professional Ice Melt is needed to

effectively melt ice and snow. Depending on the amount of ice and snow present, sprinkle the

ice melt on ice and snow at the rate of 1lb to 4.5lb per 540squarefeet. Apply evenly.

Do not over apply and avoid piling. For best results shovel off resulting slush and water.

Reapply when needed.

Over-application may cause staining or damage.

SLEET AND FREEZING RAIN: Apply early to prevent ice buildup.

WET/HEAVY SNOW: Apply early to prevent bonding.

LARGE ACCUMULATION: Clear excess snow, spread on stubborn ice or packed snow.

Use gloves and goggles when applying product. Keep bag tightly closed – contents are

hydroscopic.

Replacement Part List:

Ice Melting Products

This manual is also suitable for

Download PDF