Feiss WB1758BUS Installation guide

Type
Installation guide
1
Installation Instructions for
Parchment Park 2 Light Wall
1.1
WB1758
WB1758
Follow enclosed supplement installation instructions for electrical and fixture installation onto house junction box.
Install the candle tubes by slipping them over the sockets.
Install the candle followers by placing them on top of the candle tubes.
Screw the lamps into the sockets. Refer to the label on the lamp socket for Max Wattage information.
Install the shade onto the fixture bracket by inserting the shade peg into the notch.
1
2
3
1A
3
1
CAUTION - RISK OF FIRE
This product must be installed in accordance with the
applicable installation code by a person familiar with the
construction and operation of the product and the hazards
involved.
Use minimum 90°c supply conductors.
GP I :ENERAL RODUCT NFORMATION
These fixtures are intended to be installed utilizing NEC compliant
junction boxes.
This product is safety listed for damp locations.
This product may be dimmed with a standard incandescent dimmer.
This instruction shows a typical installation.
4
Wall
LAMP
PEG
SHADE
2
BRACKET
5
CANDLE FOLLOWER
CANDLE TUBE
NOTCH
5
4
SAVETHESE INSTRUCTIONS!
4
7400 Linder Ave, Skokie, IL 60077
800.323.3226 - 847.626.6300
www.Feiss.com
© 2015 Feiss.All rights reserved.The "Feiss" graphic is a
registered trademark of Feiss. Feiss reserves the right to
change specifications for product improvements without notification.
A Generation Brands Company
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Feiss WB1758BUS Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI