© 2014 479_U - 03/14
1 of 4
A Watts Water Technologies Company
User Manual
tekmarNet
®
4 User Switch 479
Accessories
479
_
U
03/14
Replaces: 05/07
© 2014 479_U - 03/14
2 of 4
A Watts Water Technologies Company
User Interface
The User Switch allows for easy and convenient control of your tN4 heating
and cooling systems. By pressing a single button, you can:
Activate a night setback on the tN4 heating and cooling system.
Activate an away override.
•
•
Each button is labeled according to its function.•
Button Label Function
Top
If your thermostats are not using a schedule, they will go into
Occupied (or Day Time) mode when the top button is pressed.
In this case, use the ‘Sun’ label for the top button.
If your thermostats are using a schedule, they will go into
Schedule mode when the top button is pressed. In this case,
use the ‘Clock’ label for the top button.
If some thermostats are using a schedule and some are not,
use the ‘Sun / Clock’ label for the top button.
Middle
The Middle button will always put the thermostats into
Unoccupied or Night Time mode.
Bottom
Away
The bottom button will always put your thermostats into
Away mode.
If you prefer to make custom labels, refer to the label template on the back of the
479_D brochure.
© 2014 479_U - 03/14
3 of 4
A Watts Water Technologies Company
Away
Mode is activated
Press
Button
Away
Press Button 2nd
time to cancel Mode
Returns to Occupied
(Daytime) or Schedule Mode
When a button is pressed, the button turns green and the corresponding mode
is activated.
•
When the button is pressed for a second time, that mode is deactivated and the
system returns to the Occupied (Day Time) or Schedule mode.
•
All specifications are subject
to change without notice
4 of 4 479_U - 03/14.
Product design, software and literature are Copyright ©2014 by tekmar Control Systems Ltd.,
A Watts Water Technologies Company. Head Offi ce: 5100 Silver Star Road, Vernon, B.C.
Canada V1B 3K4, 250-545-7749, Fax. 250-545-0650
Web Site
: www.tekmarControls.com
More Information
This User Brochure contains standard information on how to make adjustments
to an installed product. More detailed information can be found in this product’s
Installation and Operation Manual (479_D) at www.tekmarControls.com
Error Messages
If all 3 buttons begin to flash red together, the user switch
can no longer communicate to the rest of the tN4 controls.
Contact your installer to correct this condition.
Away
-
1
-
2
-
3
-
4
tekmar 479 User manual
- Type
- User manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
tekmar Thermostat 552 Installation guide
-
tekmar 485 Installation guide
-
-
-
-
-
tekmar Thermostat 532 Installation guide
-
-
-
tekmar tN4 User Switch 481 Installation guide