Elac 31399 Datasheet

Elac
Brand
Elac
Model
31399
Category
Loudspeakers
Type
Datasheet

This manual is also suitable for

Elac 31399 is a 3-way floorstanding speaker that produces impressive, detailed sound with excellent dynamics and precise imaging. Its exceptional performance makes it a perfect choice for both music lovers and home theater enthusiasts.

The Elac 31399 features a 1-inch JET tweeter that extends up to 50kHz, reproducing the most delicate details and nuances of your music. The JET tweeter is also known for its wide dispersion, ensuring that everyone in the room enjoys the same superb sound quality.

The Elac 31399's midrange driver is a 6.5-inch aluminum cone that delivers a natural, uncolored sound. The aluminum cone is rigid and lightweight, resulting in fast, accurate bass response.

Elac 31399 is a 3-way floorstanding speaker that produces impressive, detailed sound with excellent dynamics and precise imaging. Its exceptional performance makes it a perfect choice for both music lovers and home theater enthusiasts.

The Elac 31399 features a 1-inch JET tweeter that extends up to 50kHz, reproducing the most delicate details and nuances of your music. The JET tweeter is also known for its wide dispersion, ensuring that everyone in the room enjoys the same superb sound quality.

The Elac 31399's midrange driver is a 6.5-inch aluminum cone that delivers a natural, uncolored sound. The aluminum cone is rigid and lightweight, resulting in fast, accurate bass response.

Slim and beautiful ELAC FS 207 A
To celebrate ELAC’s 80th anniversary, we now
introduce the FS 207 in a new design. The loudspeaker
looks not only impressive, it’s ELAC's state-of-the-art
technology for the best possible value for money!
Technical features/benefits:
• Powerful-driven new JET-III tweeter with
neodymium magnet system. Due to its ribbon
geometry, it provides a cut-off frequency of 50
kHz (!) and improved sound radiation. The inner
damping enables perfect linear frequency
response.
• Innovative 150 mm concave high-power
aluminium woofer with broad rubber surround.
With a special glueing procedure, a 0.2 mm
aluminium layer is bonded to a pulp fibre cone
to form a sandwich diaphragm. Perfect tension
of the diaphragm, resulting in perfect large-
signal behaviour; dampening on the back of the
diaphragm for strong bass
• computer-optimized cross-over network for
improved sound power to provide for optimum
and homogenous directional characteristic
regarding the frequency range
• all drivers are protected from overload
• MDF cabinet design (medium density fibre board, density: 800 kg/m
3)
with additional reinforcements for minimum resonances.
• Another feature is ELAC’s superior bi-wiring terminal with separate
circuit boards for bass and treble circuits. The inclined binding posts are
easy to access and allow larger cable diameters (16 qmm), as well as
high-quality spade ends (e. g. WBT products).
• The FS 207 A is available with plinth and new ELAC spikes/ silicone
feet
Finishes: matt black, cherry veneer, silver shadow, titan shadow, white high gloss, black high gloss
Specifications ELAC FS 207A Crossover frequency 350/2700 Hz
Dimensions HxBxT 935 x 170 x 285 mm Nominal / Peak Power Handling 120 W / 160 W
Weight approx. 15 kg Frequency range 36-50.000 Hz
Type 2,5-way, bass reflex Sensitivity 89 dB/2.8V/m
Woofer 2 x 150 mm cone, magnetically
shielded
Nominal impedance 4 Ohms
Tweeter 1 x JET III Minimum impedance 3.4 Ohms at 220 Hz
Recom. Amplifier Power at
Nominal Impedance
30 – 250 W / channel
  • Page 1 1

Elac 31399 Datasheet

Elac
Brand
Elac
Model
31399
Category
Loudspeakers
Type
Datasheet
This manual is also suitable for

Elac 31399 is a 3-way floorstanding speaker that produces impressive, detailed sound with excellent dynamics and precise imaging. Its exceptional performance makes it a perfect choice for both music lovers and home theater enthusiasts.

The Elac 31399 features a 1-inch JET tweeter that extends up to 50kHz, reproducing the most delicate details and nuances of your music. The JET tweeter is also known for its wide dispersion, ensuring that everyone in the room enjoys the same superb sound quality.

The Elac 31399's midrange driver is a 6.5-inch aluminum cone that delivers a natural, uncolored sound. The aluminum cone is rigid and lightweight, resulting in fast, accurate bass response.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents