Iadea XDS-2370 User manual

Brand: Iadea

Model: XDS-2370

Category: TVs & monitors

Type: User manual

Iadea XDS-2370 is a 23” smart signboard with a high-quality IPS LCD panel and a maximum brightness of 250 nits. It has a resolution of 1920x1080 and wide viewing angles of 178/178. The device supports various video and image formats, including H.264, VC-1, MPEG-4 ASP, MPEG-2, JPEG, and PNG. It also supports MP3 audio and dynamic content such as W3C HTML5 and SMIL 3.0 instructions.

The Iadea XDS-2370 has a built-in media player and 8GB of on-board storage, which can be expanded via a microSD card slot.

XDS-2370 Hardware User Manual

Contents

XDS-2370 Hardware User Manual 0

1. Introduction 1

1.1. Package contents 1

1.2. Physical view and features 1

1.3. Installation 1

1.4. Setting up 2

2. Technical Data 4

2.1. Specifications 4

3. Appendix 5

3.1. OSD Menu 5

1. Introduction

This document describes the hardware of the XDS-2370

1.1. Package contents

1.2. Physical view and features

1.3. Installation

In some instances, due to major temperature deviation and change in elevation or environment, the

signboard's glass panel might trap slight moisture and will require at least 2-4 hours for the

condensation to evaporate prior to usage to avoid damaging the product.

Mounting with VESA compatible mounting interface

This smart signboard accepts a MIS-D100(100mm x 100mm) VESA-Compliant mounting interface, the

recommended screw is M4 x 9mm (excl. bracket thickness)

Installing the optional display stand

1 Place the display face down on a still surface, use clean cloth as cushion underneath is suggested

2 Place the stand on the mounting bracket and install the screw

Main Unit

Power Cord

(with select power plug)

3 Adjust the stand to switch between portrait/landscape installation

Alternatively, user can rotate the screen to change its orientation follow the instruction as shown below:

1.4. Setting up

Using control buttons

1 To unlock the control button, press and hold up and down buttons for 10 seconds, OSD unlocked notification

will pop up on screen

2 Button function table

Switch input source

1 Press AUTO button to access input source menu as shown below

2 Press AUTO button to switch between D-SUB,HDMI and Digital Signage, then press MENU button to enter the

selected source

The OSD menu

1 Press MENU button to access OSD MENU, please check appendix for full menu explanation

Factory reset by OSD

There are 2 methods to perform factory reset, below describes the step to reset by OSD

1 Unlock control button if it is locked

2 Press AUTO button to access input source menu first

3 Press and hold up button for 5 seconds to access reset menu as shown below

4 Press up/down button to change focus to Reset and press MENU button to enter Reset option

5 Press up/down button to change setting as Yes then press MENU button to perform factory reset

Factory reset by long press control button

Alternatively, user can perform factory reset by long press control button

1 Power off device by remove power cord

2 Press and hold up button and then power on by connect power cord to the unit

3 Keep holding up button until power led blinks

2. Technical Data

2.1. Specifications

XDS-2370

Display

23” IPS LCD panel

250 nits maximum brightness

1920x1080 panel resolution

Viewing angle (H/V): 178/178

Video format support

H.264 (up to 1080p,10Mbps)

VC-1 (up to 1080p,10Mbps)

MPEG-4 ASP (up to 1080p,10Mbps)

MPEG-2 (up to 1080p,10Mbps)

POPAI Screen Media Standards : S6 to S12, E4,E7,E8

Image format support

JPEG,PNG up to 1920x1080

POPAI Screen Media Standards : S1 to S3, E1 to E3

Audio codec support

MP3 up to 320Kbps

POPAI Screen Media Standards : S4, S5

Dynamic content

W3C HTML5 (HTML, CSS, JavaScript)

W3C SMIL 3.0 instructions (sub-set)

Interactivity

GPIO via PIO-101 module (optional)

Physical I/O connectors

Micro SD card slot

Micro USB for ADB(Android Debug Bridge)

3.5mm audio out

USB ports x 2

Ethernet port x 1

3.5mm audio in

VGA in

HDMI in

Power jack

Kensington lock

Embedded wireless antenna

Built-in stereo speaker 2w x 2

Local storage

8GB on-board eMMC with micro SD card expansion slot

Accessories

Power cord

Power requirement

AC 100-240V, 50~60Hz

Power consumption

Approximately 40 watts (average)

Environmental

Operating temperature: 0 – 45° C / 32 – 113° F

Humidity: 10 – 85% @ 45° C / 113° F non-condensing

Dimensions

561 x 338.4 x 57.2mm (22.09 x 13.32 x 2.25 inches)

Weight

4.5 Kg

9.92 lbs

Certifications

CE/FCC/VCCI/TELEC

Warranty

One-year limited parts & labor

3. Appendix

3.1. OSD Menu

Main Menu

Item

Sub Menu

Item

Sub

Item

Description

Adjust

Range

Reset Value

Luminance

Contrast

N/A

Contrast

0-100

Brightness

N/A

Backlight Adjustment

0-100

Eco Mode

N/A

Brightness = 90,

Contrast = 50

Adjustable

Standard

Mode

Brightness = 20,

Contrast = 50

Not Adjustable

Text

Brightness = 40,

Contrast = 50

Not Adjustable

Internet

Brightness = 60,

Contrast = 50

Not Adjustable

Game

Brightness = 80,

Contrast = 50

Not Adjustable

Movie

Brightness = 100,

Contrast = 50

Not Adjustable

Sports

DCR

N/A

Dynamic contrast ratio

On/Off

Off

Image

Setup

Clock

N/A

Adjust picture Clock to reduce Vertical-

Line noise

0-100

Do Auto

Config

Phase

N/A

Adjust Picture Phase to reduce

Horizontal-Line noise

0-100

Do Auto

Config

H. Position

N/A

Adjust the horizontal position of the

picture

0-100

V. Position

N/A

Adjust the vertical position of the

picture

0-100

Image Ratio

N/A

Not Adjustable

Wide

Default to

panel native

aspect ratio

Color

Temp.

Warm

N/A

Set Color Temperature to Warm

N/A

Normal

N/A

Set Color Temperature to Normal

N/A

Cool

N/A

Set Color Temperature to Cool

N/A

User

Red

Red Gain

0-100

The User

R/G/B value

(default is

50) will not

be modified

by Reset

function

Green

Green Gain

0-100

Blue

Blue Gain

0-100

sRGB

N/A

Set Color Temperature to sRGB

N/A

OSD Setup

H. Position

N/A

Adjust the horizontal position of the OSD

0-100

V. Position

N/A

Adjust the vertical position of the OSD

0-100

Timeout

N/A

Adjust the OSD timeout

5-100

Language

N/A

Set OSD display language

English

Español

Français

Português

Русский

简体中文

繁體中文

한국어

OSD Lock

N/A

Turn On/Off OSD Lock

Extra

Input Select

N/A

Select input source

D-SUB

N/A

HDMI

Digital

Signage

DDC/CI

N/A

Select DDC/CI on or off

Off

Reset

N/A

Clear each old status of Auto-

configuration and set the color

temperature to Warm

Yes

Do not execute reset, return to main

menu.

Information

N/A

Resolution:

(H)x(V)

H. Frequency:

(KHz)

V. Frequency:

(Hz)

Iadea XDS-2370 User manual

Brand: Iadea

Model: XDS-2370

Category: TVs & monitors

Type: User manual

The Iadea XDS-2370 has a built-in media player and 8GB of on-board storage, which can be expanded via a microSD card slot.

Download PDF

report

Iadea XDS-2370 User manual

Iadea XDS-2370 User manual

Related papers

Other documents