Vivitek H8030 User manual

Brand: Vivitek

Model: H8030

Category: Projectors

Type: User manual

H8030

User's Manual

H8030 Home Theater Projector - User Manual

Table of Contents

IMPORTANT SAFETY INSTRUCTIONS .........................................................................5

DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC EQUIPMENT .................................................6

Important Recycle Instructions ...............................................................................................................6

INTRODUCTION ..............................................................................................................7

About This Manual .................................................................................................................................7

Description, Features and Benets ........................................................................................................7

Parts List ................................................................................................................................................8

CONTROLS AND FUNCTIONS .......................................................................................9

H8030 at a Glance ................................................................................................................................9

I/O Panel ..............................................................................................................................................10

KEYPAD ...............................................................................................................................................11

LED Indicator .......................................................................................................................................11

REMOTE CONTROL ...........................................................................................................................12

INTALLATION ................................................................................................................13

To install batteries in the remote ..........................................................................................................13

Range of effective remote control signal reception ..............................................................................13

Installation Considerations .........................................................................................14

Ambient Light ......................................................................................................................................14

Throw Distance ...................................................................................................................................14

Modes of installation ............................................................................................................................15

Allow at least 50 cm clearance around the exhaust vent .....................................................................16

Do not tilt the projector more than 15 degrees .....................................................................................16

Other Considerations ...........................................................................................................................16

Lens Shift ......................................................................................................................17

Vertical Lens Shift ................................................................................................................................17

Horizontal Lens Shift ............................................................................................................................17

Connecting the projector to other devices ................................................................18

HDMI Connection .................................................................................................................................18

12V Trigger connection ........................................................................................................................18

IR Input connection ..............................................................................................................................19

S-VIDEO, VIDEO connection ...............................................................................................................19

COMPONENT connection ...................................................................................................................20

RS-232 Controller Connection .............................................................................................................20

Start using the projector – Adjustments ....................................................................21

Connecting to AC Power ......................................................................................................................21

Turning on the Power ...........................................................................................................................21

Changing the OSD Language ..............................................................................................................22

Adjusting the Picture Orientation .........................................................................................................22

Mechanical Adjustments ......................................................................................................................23

Operation .......................................................................................................................24

Selecting an Input Source ....................................................................................................................24

Selecting an Aspect Ratio ....................................................................................................................24

H8030 Home Theater Projector - User Manual

Selecting Video Memory ......................................................................................................................24

Using the On-Screen Menus (OSD) ....................................................................................................25

Start using the projector - OSD Introduction .............................................................26

OSD Menu Tree ...................................................................................................................................26

OSD Introduction – MAIN ....................................................................................................................27

OSD Introduction – ADVANCE.............................................................................................................32

OSD Introduction – SYSTEM ...............................................................................................................35

OSD Introduction - CONTROL .............................................................................................................36

OSD Introduction – LANGUAGE .........................................................................................................37

OSD Introduction – SERVICE ..............................................................................................................37

Change Lamp ................................................................................................................39

To replace the projector lamp ............................................................................................................... 39

Maintenance and Troubleshooting .............................................................................40

Serial Communications................................................................................................41

RS-232 Error Codes......................................................................................................48

Specications ...............................................................................................................49

H8030 Specications ...........................................................................................................................49

H8030 Specications (continued) ........................................................................................................50

Reliability ..............................................................................................................................................50

Standard Accessories ..........................................................................................................................50

Dimensions ...................................................................................................................51

Supported Timings .......................................................................................................52

About the Vivitek Support ...........................................................................................53

H8030 Home Theater Projector - User Manual

This publication, including all photographs, illustrations and software, is protected under

material contained herein, may be reproduced without writ-ten consent of the manufacturer.

Disclaimer

The information in this document is subject to change without notice. The manufacturer

makes no representations or warranties with respect to the contents hereof and specically

disclaims any implied warranties of merchantability or tness for any particular purpose.

The manufacturer reserves the right to revise this publication and to make changes from

time to time in the content here without obligation of the manufacturer to notify any person

of such revision or changes.

About this manual

This manual is intended for end users and describes how to install and operate the DLP

projector. Wherever possible, relevant information such as an illustration and its description

has been kept on one page. This printer-friendly format is both for your convenience and

to help save paper, thereby protecting the environment. It is suggested that you only print

sections that are relevant to your needs.

H8030 Home Theater Projector - User Manual

IMPORTANT SAFETY INSTRUCTIONS

Thank you for your purchase of this quality product! For best performance, please read this

manual carefully as it is your guide through the menus and operation.

1. Read and Keep these instructions.

2. Heed all warnings.

3. Follow all instructions.

4. Do not use this apparatus near water, and not install near any heat sources such as

radiators, heat registers, stoves, or other apparatus (including ampliers) that produce

heat.

5. Clean only with a dry cloth.

6. Do not block any of the ventilation openings. Install in accordance with the

manufacturer’s instructions.

7. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized

plug has two blades with one wider than the other. A grounding type plug has two

blades and a third grounding prong. The wide blade or the third prong is provided for

your safety. When the provided plug does not t into your outlet, consult an electrician

for the replacement of the obsolete outlet.

8. Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles and the point where they exit from the apparatus.

9. Only use the attachments/accessories specied by the manufacturer.

10. Use only with a cart, stand, tripod, bracket or table specied by the manufacturer or

sold with the apparatus. When a cart is used, use caution when moving the cart/

apparatus to avoid injury from tip-over.

11. Unplug this apparatus during lightning storms or when unused for long periods of

time.

12. Refer all servicing to qualied service personnel. Servicing is required when the

apparatus has been damaged in any way, such as power supply cord or plug is

damaged, liquid has been spilled or objects have fallen into the ap-paratus, the

apparatus has been exposed to rain or moisture, does not operate normally, or has

H8030 Home Theater Projector - User Manual

been dropped.

13. The +12V trigger only outputs 12V DC signal for triggering. Do not connect to any

other power input or output. This could cause damage to this unit.

14. Keep the packing material in case the equipment

15. Never look into the lens when the projector is on.

DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC EQUIPMENT

(Applicable throughout the European Union and other European countries with separate collection programs)

This symbol found on your product or on its packaging, indicates that this

product should not be treated as household waste when you wish to dispose

of it. Instead, it should be handed over to an applicable collection point for the

recycling of electrical and electronic equipment. By ensuring this product is

disposed of correctly, you will help prevent potential negative consequences

to the environment and human health, which could otherwise be caused by

inappropriate disposal of this product. The recycling of materials will help to

conserve natural resources. This symbol is only valid in the European Union.

If you wish to discard this product, please contact your local authorities or

dealer and ask for the correct method of disposal.

Important Recycle Instructions

Lamp(s) inside this product contain mercury. This product may contain

other electronic waste that can be hazardous if not disposed of properly.

Recycle or dispose in accordance with local, state, or federal Laws. For more

information, contact the Electronic Industries Alliance at WWW.EIAE.ORG

For lamp specic disposal information check WWW.LAMPRECYCLE.ORG

H8030 Home Theater Projector - User Manual

INTRODUCTION

About This Manual

This User’s Manual describes how to install, set up and operate the H8030. Throughout

this manual, the Projector is referred to as the “H8030.”

Vivitek has prepared this manual to help installers and end users get the most out of the

H8030. Vivitek has made every effort to ensure that this manual is accurate as of the

date it was printed. However, because of ongoing product improvements and customer

feedback, it may require updating from time to time. You can always nd the latest version

of this and other Vivitek product manuals on-line, at www.vivitekcorp.com.

Description, Features and Benets

The Vivitek H8030 provides state-of-the-art technology for 1080P picture performance,

native resolution for crystal clear, pristine images. The H8030 features optional high

performance lens. These precision optics allow for picture size optimization in the majority

of installations. Exceptional scaling and lm-to-video (3:2 pull-down) conversion is easily

achieved. Combined with Vivitek’s sophisticated parameters for white balancing, the

H8030’s proprietary de-interlacing technology provides the highest level of development

for gray-scale and color balancing and artifact-free images. The H8030 also features ease

of use operation by utilizing discreet infrared (IR) and RS-232 commands from a control

system.

■ Key Features and Benets

The H8030 offers these key features and benets:

• Native Resolution: 1920 x 1080 pixels (16:9 Native Aspect Ratio).

• DLP system using high-performance Digital Micromirror Device (DMD).

• Two (2), HDMI 1.3 Inputs with High-bandwidth Digital Content Protection (HDCP).

• HDTV Compatible .

• Excellent Video Processing on progressive and interlaced video inputs.

■ Green Product with:

• Lead free solder used for soldering including circuit and component electronics.

• Lead free glasses and coatings.

• Recycled paper used in the user manuals and packing cartons.

• Energy Saving: High efciency power switching and less than 1W power

consumption

in standby mode.

■ Additional Features of the H8030

• Horizontal and vertical lens shift.

H8030 Home Theater Projector - User Manual

Parts List

Your H8030 is shipped with the following items, if any items are missing or damaged,

please contact your

• Power Cable USA x 1

• HDMI Cable x 1

• DLP Projector x 1

• Wrench x 1

• Remote Control x1

• Batteries x 2

• CD x 1

• Warranty Card USA x 1

• Standard Lens throw range (1.85 to 2.40:1)

Note: The H8030 has multiple lens options. Please check product brochure or

datasheet for more info.

H8030 Home Theater Projector - User Manual

CONTROLS AND FUNCTIONS

H8030 at a Glance

Focus ring

H/V Shift adjustment

Front Infre-red

window

(remote control)

Adjustable

feet*4

Zoom ring

Air inlet

• Vertical and Horizontal Shift adjustment

Refer to Page 23 --- Mechanical Adjustments

• Focus Ring

Rotate this to focus the projected image.

• Zoom Ring

Rotate this to change the projected image

size.

• Air Inlet

Internal fans draw cool air into the

projector through this vent.

• Adjustable feet

Use these when the projector is installed

in a table-top conguration to level the

image and/or adjust the projection angle

• Front Infrared Window

Remote control IR receiver

Rear Infre-red window

(remote control)

Lamp Cover

Air outlet

• Lamp Cover

Refer to Page 39 --- Change Lamp

• Rear Infrared Window

Remote control rear IR receiver

• Air outlet

Warm air exits the projector through this

vent. Ensure that it is not blocked

240 96.05

103.85170

199.05

• M4xL10

Use screw x 3pcs

(M4, Length=10mm)

for ceiling mount.

H8030 Home Theater Projector - User Manual

I/O Panel

HDMI 2HDMI 1

RGB

COMPONENT 1VIDEOS-VIDEOIR INPUTRS-232

12V TRIGGER

AC POWER IN

• TRIGGER

(3.5-mm, mini phone jack) Offers 12 (+/- 1.5) V of output for 350mA monitor relay

protection.

• IR INPUT

Wired input from a Niles- or Xantech-compatible, infrared (IR) repeater system.

• S-VIDEO

A standard S-Video input for connecting a DVD player, satellite receiver or Super VHS

(S-VHS) VCR.

• VIDEO

Standard composite video input for connecting a VCR, laser disc player or other

composite video source. Also pro-vides composite sync input for RGBS sources.

• COMPONENT (RCA connectors)

Standard or high-denition (480i/480p/576i/576p/720p/1080i/1080p) Component

(YPbPr) input for connecting a DVD/HD-DVD/BD player, HD set-top box or other SD/

HD source. Also provides RGB input for RGBS sources.

• RGB

Provides a standard, 15-pin VGA-style connection to either an RGB or component

high-denition source, or to a personal computer. The H8030 automatically detects the

input signal resolution.

• HDMI1, HDMI2

For connect the device which have HDMI output connectors.

• AC Power In

For input AC power from the wall to the projector Inlet.

H8030 Home Theater Projector - User Manual

KEYPAD

SOURCE

POWER

SELECT

LED STATUS

ISSUE

• MENU

Press this button to show or hide the OSD menu.

• SELECT ▲▼◄►

Use these buttons to select items or settings, adjust settings or switch display patterns.

• SOURCE

Press to select a video source. HDMI1, HDMI2, RGB, COMP1, VIDEO or S-VIDEO.

• Power

Use the button to turn on/off the projector.

• LED STATUS

The LED status indicators are for different colors or blinking of the lights mean.

LED Indicator

Blue (Power) Red (Issue)

Standby

Cooling / Warm up

Power on / Normal

Lamp fail

Lamp door open

Fan fail

Over Temperature

Filter fail

System Error

repeat

H8030 Home Theater Projector - User Manual

REMOTE CONTROL



Status LED Power Bottons:

Use these button to turn the projector on

(

)

or off

( )



Source Selection Buttons (1-5):

Press to select a video source. By default, these buttons are

signed as follows:

1 = HDMI 1; 2 = HDMI 2; 3 = Component 1;

4 = S-Video; 5 = Video.

However, you can assign each button to any source you wish.

When you assign a source to a numbered key, the projector

immediately goes to that source. If the chosen source is disabled

via the Source Enable menu, this setting has no effect.



Cursor Keys (▲▼◄►)

Use these buttons to select items or settings, adjust

settings or switch display patterns.

ENTER

Press to select a highlighted menu item or conrm a changed

setting.



Aspect Ratio Selection Button

Press this button repeatedly to select one of the following aspect

ratios:

16 : 9: For viewing 16:9 DVDs or HDTV programs in their native

aspect ratio.

Letterbox: For viewing LaserDisc movies or non-anamorphic

DVDs on a 16:9 screen.

4 : 3: Scales the input signal to t 4:3 sources in the center of

the screen.

4:3 Narrow: Scales the input signal to t 4:3 sources in the enter

of the screen when using an anamorphic lens.

Native: Displays source image in its native resolution without

re-sizing or overscan.



Press this button to show or hide the OSD controls.



Memory Preset Buttons (A / B / C)

Press to recall settings for the current input from one of three

memory presets. By default, these buttons are assigned as

follows: A = User Memory A; B = User Memory B; C = User

Memory C.



Picture Adjustment Buttons:

Contrast ( ): Press to adjust white level.

Brightness (

): Press to adjust black level.

Sharpness (SHARP): Press to adjust sharpness.

Gamma (GAMMA): Press to select a gamma curve.

Overscan (O-SCAN): Press to select an overscan mode.

Noise Reduction (NR): Press to adjust noise reduction level.

Brilliant Color (BRI-C): Press to adjust brilliant color.

Color Temperature (C-TEMP): Press to adjust color temperature.

Test Patterns (TEST): Press to activate test patterns.

H8030 Home Theater Projector - User Manual

INTALLATION

To install batteries in the remote

1. Slide the battery compartment cover in the direction of the arrow to remove it.

2. Install two AA batteries with the correct polarity.

3. Replace the cover.

1 2 3

Note on Batteries

• Make sure that the battery polarities are correct when installing the batteries

• Do not mix an old battery with a new one or different types of batteries.

• If you will not use the remote control for a long time, remove the batteries to avoid

damage from battery leakage.

Notes on Remote Control Operation

• Inmostsituations,youcansimplypointtheremotecontrolatthescreenwhichwillreect

the

IR signal from the remote back toward the IR receiver on the projector. In some cases,

however, ambient conditions may prevent this. If so, point the remote

control at the projector

and try again.

• If the effective range of the remote control decreases, or it stops working, replace the

batteries with new ones.

• The remote control may fail to operate if the infrared remote sensor is exposed to bright

 sunlightoruorescentlighting.

Range of effective remote control signal reception

• IR Reception effective Angles: 30°

• IR Reception effective distance: 10m

Note:

Avoid placing the remote control at places of high temperature or humidity as it could

cause the remote control to malfunction

H8030 Home Theater Projector - User Manual

Installation Considerations

Proper installation of your projector will ensure the quality of your display. Whether you are

installing a projector temporarily or permanently, you should take the following into account

to ensure your projector performs optimally.

Ambient Light

In general, minimize or eliminate light sources directed at the screen. Contrast ratio in your

images will be noticeably reduced if light directly strikes the screen, such as when a shaft

of light from a window or oodlight falls on the image. Images may then appear washed

out and less vibrant.

Requires separate room Installation cost is usually higher.

Throw Distance

Throw distance is the distance measured from the front of the projector to the screen. This

is an important calculation in any projector installation as it determines whether or not you

have enough room to install your projector with a de-sired screen size and if your image

will be the right size for your screen. You can quickly estimate the throw distance by taking

the width of the screen and multiplying it by the lens throw ratio; see Figure 3-2. The result

of this calculation tells you roughly how far back the projector should be positioned from

the screen in order to project a focused image large enough to ll the screen.

Throw Distance (TD) = Screen Width (W) x Throw Ratio (TR)

Screen Width (SW)

Throw Distance (TD)

Note:

H8030 is available with multiple lens options. The standard H8030 offers throw ratios

between 1.85:1 - 2.40:1. With the optional, short-throw lens with throw ratios between

1.56:1 - 1.86:1, and long-throw lens with throw ratios between 2.40:1 – 4.0:1.

H8030 Home Theater Projector - User Manual

Modes of installation

■ Frontal projection - desktop installation

Advantages: Easy to install can be easily moved

or adjusted easy to operate

Disadvantage: Occupies oor space and limits

seating capacity.

Projector

■ Rear projection - desktop installation

Advantage: The projector is completely hidden

from plain view the projector can be easily

operated this setup usually offers better reduction

of ambient noise.

Disadvantage: Requires an additional room for

installation relatively higher costs for installation.

Projector

■ Frontal projection - ceiling mode

Advantage: Does not occupy oor space does not

draw attention to it. Eliminates the possibility that

someone would accidentally move the projector.

Disadvantage: Stricter installation requirements

and conditions; care should be taken during the

installation to ensure the projector has been

securely mounted. Operation of the projector

becomes inconvenient without the remote control.

Projector

■ Rear projection - ceiling mode

Advantage: The projector is completely hidden

from plain view this setup usually offers better

reduction of ambient noise.

Disadvantage: Requires an additional room for

installation. Stricter installation requirements

and conditions; care should be taken during the

installation to ensure the projector has been

securely mounted. Operation of the projector

becomes inconvenient without the remote control.

Projector

H8030 Home Theater Projector - User Manual

Allow at least 50 cm clearance around the exhaust vent

50cm above

30cm

above

50cm above 50cm above

10cm above

Do not tilt the projector more than 15 degrees

The maximum tilt angle for the projector is 15 degrees.

When the projector is tilted more than 15 degrees, it will shorten the life of the projector

lamp and may lead to other unpredictable damages.

Can’t > 15˚

Other Considerations

• Install the projector in an environment below 35°C (95°F). The projector should be kept

clear from sources of heat and / or ventilation openings of air conditioner.

• The projector should be kept away from devices that emit electromagnetic energy,

such as motor and transformer. Common devices that emit electromagnetic energy

include slideshow system, speakers, power ampliers and elevators.

• If you choose to install the projector on the ceiling, be sure to use the ceiling

installation

components manufactured by manufacturer-certied vendors. For details,

please contact your local dealer.

• Ensure that the intake vents do not recycle hot air from the exhaust vent.

H8030 Home Theater Projector - User Manual

Lens Shift

Vertical Lens Shift

The H8030 has a lens shift capability which allows the vertical movement of the image

without moving the projector. Lens shift is generally expressed as a percentage of the

screen height. For ceiling mounted projectors, the lens can be moved 120% (0.6V)

downward, while the lens can be moved 120% (0.6V) up or down on a desktop mounted

projector.

0.6V

Horizontal Lens Shift

The H8030 has a lens shift capability which allows the horizontal movement of the image

without moving the projector. The lens can be moved 30% (0.15H) to the right or left within

the housing.

0.15H

Note:

This is a general example of lens shift. Lenses vary in their shift capabilities.

No particular lens or projector is used in this example.

H8030 Home Theater Projector - User Manual

Connecting the projector to other devices

HDMI Connection

Proceed as follows to connect the H8030 to your video sources, external controller(s) - if

present - and AC power. When connecting your equipment: •Use the correct signal cables

for each source. •Ensure that the cables are securely connected. Tighten the thumbscrews

on connectors that have them. Connecting Source Components to the H8030 Connect

your video sources to the H8030 as shown and described in the sections that follow

HDMI 2HDMI 1

RGB

COMPONENT 1VIDEOS-VIDEOIR INPUTRS-232

12V TRIGGER

12V Trigger connection

If your home theatre system includes a projector screen, screen cover or other 12V Trigger

equipment, please connect such device/equipment to the projector’s 12V Trigger output as

illustrated. After you have done so, your screen will lower automatically whenever you turn

on your projector for your convenience.

Projector Screen

Retractable scren or other

12V device

Sleeve - Greond

Tip = +12V

HDMI 2HDMI 1

RGB

COMPONENT 1VIDEOS-VIDEOIR INPUTRS-232

12V TRIGGER

H8030 Home Theater Projector - User Manual

IR Input connection

If infrared signals from the remote control cannot reach the projector due to excessive

distance or obstructions such as walls or cabinet doors, you can connect an external IR

repeater system to the IR INPUT on the H8030 to extend the range of the remote control.

Remote

IR sensor

IR repeater

HDMI 2HDMI 1

RGB

COMPONENT 1VIDEOS-VIDEOIR INPUTRS-232

12V TRIGGER

S-VIDEO, VIDEO connection

If the image input device offers both S-Video and Video connection, it is recommended that

you choose S-Video to obtain better image quality. If both the S-Video and Video inputs are

connected to the projector, the projector will prioritize S-Video signal input and image from

the Video input will not be played.

DVD player. VCR. statllite receiver.LD and forth

HDMI 2HDMI 1

RGB

COMPONENT 1VIDEOS-VIDEOIR INPUTRS-232

12V TRIGGER

H8030 Home Theater Projector - User Manual

COMPONENT connection

Connect your component video sources to the COMPONENT 1 or RGB inputs as shown.

DTV set-top-box or other

component (YPbPr) input source

Y Pb Pr

COMPONENT 1

RS-232 Controller Connection

Connect a PC or home theater control/automation system (if present) to the RS-232 port

on the H8030. Use a standard, 9-pin serial cable, wired straight-through.

HDMI 2HDMI 1

RGB

COMPONENT 1VIDEOS-VIDEOIR INPUTRS-232

12V TRIGGER

Page is loading ...

Vivitek H8030 User manual

Brand: Vivitek

Model: H8030

Category: Projectors

Type: User manual

Download PDF

report

Vivitek H8030 User manual

Vivitek H8030 User manual

Related papers

Other documents