Trendnet TW100-BRF214 User guide

Category
Networking
Type
User guide
TRENDnet User’s Guide
Cover Page
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
Table of Contents
i
Contents
Product Overview ........................................................................... 1
Package Contents .......................................................................................................... 1
Features ......................................................................................................................... 1
Product Hardware Features........................................................................................... 2
Application Diagram ...................................................................................................... 4
Basic Router Setup .......................................................................... 5
Creating a Home Network ............................................................................................. 5
Router Installation ......................................................................................................... 6
Connect additional wired devices to your network ..................................................... 11
Access Control Filters .................................................................... 12
Access control basics ................................................................................................... 12
Client Filtering ......................................................................................................... 12
MAC address filters ................................................................................................. 13
Domain/URL Filters ................................................................................................. 14
Advanced Router Setup ................................................................. 16
Access your router management page ........................................................................ 16
Change your router login password ............................................................................ 16
Set your router date and time ..................................................................................... 17
Manually configure your Internet connection ............................................................. 18
Clone a MAC address ................................................................................................... 18
Change your router IP address .................................................................................... 19
Set up the DHCP server on your router ....................................................................... 19
Set up DHCP reservation .............................................................................................. 20
Enable/disable UPnP on your router ........................................................................... 21
Allow VPN connections through your router............................................................... 22
Allow FTP connections using an FTP Non-standard port ............................................. 22
Allow NetMeeting H.323 connections through your router ....................................... 23
Allow/deny ping requests to your router from the Internet ....................................... 23
Identify your network on the Internet ........................................................................ 24
Allow remote access to your router management page ............................................. 24
Open a device on your network to the Internet .......................................................... 25
DMZ ......................................................................................................................... 25
Virtual Server .......................................................................................................... 27
Port Mapping .......................................................................................................... 28
Port Trigger ............................................................................................................. 29
Set up Quality of Service (QoS) on your router ........................................................... 30
Port Based ............................................................................................................... 30
DSCP Based ............................................................................................................. 31
Prevent ARP spoofing attacks on your network .......................................................... 32
Prevent DoS (Denial of Service) attacks on your network ........................................... 33
Enable/Disable NAT on your router ............................................................................ 34
Enable/Disable IGMP Snooping on your router .......................................................... 34
Add static routes to your router .................................................................................. 35
Enable dynamic routing on your router ...................................................................... 36
Router Maintenance & Monitoring ............................................... 37
Reset your router to factory defaults .......................................................................... 37
Router Default Settings ............................................................................................... 37
Backup and restore your router configuration settings .............................................. 38
Restart your router ...................................................................................................... 40
Check connectivity using the router management page ............................................. 40
Check the router system information ......................................................................... 41
View your router log .................................................................................................... 42
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
Table of Contents
ii
Configure your router log ............................................................................................ 43
Router Management Page Structure ............................................. 45
Technical Specifications................................................................. 46
Troubleshooting ............................................................................ 47
Appendix ...................................................................................... 48
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TW100-BRF214
1
Product Overview
TW100-BRF214
Package Contents
In addition to your router, the package includes:
Multi-Language Quick Installation Guide
CD-ROM (User’s Guide)
Network cable (1.5m / 5ft.)
Power adapter (5V DC, 1A)
If any package contents are missing or damaged, please contact the retail store, online
retailer, or reseller/distributor from which the product was purchased.
Features
The 4-Port Fast Ethernet Firewall Router, model TW100-BRF214, is easy to setup
up and suitable for home office, small office, and medium sized business
installations. It comes in a sturdy metal housing, offers four Fast Ethernet Ports,
and features advanced QoS, Firewall, and event log functions.
Connection duration and type, firewall status, and system information event
logs help with trouble shooting and network maintenance. This router supports
dynamic IP, Static IP, PPPoE, PPTP, L2TP, DNS, and dynamic DNS connections.
Access controls include URL, IP address, and MAC address filters. Advanced
Denial of Service (DoS) capabilities include protection from IP Spoofing, Ping of
Death, TCP Flooding and other attacks. Quality of Service (QoS) management
functions set port-based bandwidth and DSCP queue priority controls.
1 x 10/100Mbps Auto-MDIX port (WAN/Internet)
4 x 10/100Mbps Auto-MDIX ports (LAN)
Supports Cable/DSL Modems with Dynamic IP, Fixed IP, PPPoE, PPTP, and
L2TP connection types
Supports Network Address Port Translation (NAPT)
Firewall features include NAT and Stateful Packet Inspection (SPI)
Advanced security features include Denial of Service (DoS) and ARP spoofing
prevention
Website access restriction by URL/Keyword (32 entries)
MAC Address control to allow or deny access (32 entries)
Client Filtering by Date/Time using TCP/UDP ports (20 entries)
Supports Virtual Servers (40 Entries), DMZ (6 Entries), Port Trigger/Port
Mapping (10 Entries)
Multiple VPN pass-through sessions for IPsec, L2TP, and PPTP (100 VPN
sessions)
Supports static routes (20 entries)
Supports Dynamic DNS service
Includes port-based bandwidth control and DSCP
Universal Plug and Play (UPnP) and Application Level Gateway support for
Internet applications such as email, FTP, gaming, and more
Easy Web browser configuration and remote management
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TW100-BRF214
2
Product Hardware Features
Rear View
Reset Button Use an item such as a paperclip to push and hold this button for
15 seconds and release to reset your router to its factory defaults.
LAN Ports Connect Network cables (also called network cables) from your
router LAN ports to your wired network devices.
WAN PortConnect a Network cable from your router WAN port to your
modem.
Power Port Connect the included power adapter from your router power
port and to an available power outlet.
Note: Use only the adapter that came with your router.
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TW100-BRF214
3
Front View
Power LED - This LED indicator is solid green when your router is powered on.
Otherwise if this LED indicator is off, there is no power to your router.
WAN (Link/Activity) LED This LED indicator is solid green when your router
WAN port is physically connected to the modem Network port (also called
network port) successfully with a Network cable. The LED indicator will be
blinking green while data is transmitted or received through the WAN port of
your router.
WLAN (Link/Activity) LED This LED indicator is blinking green when the
wireless is “On” and functioning properly on your router. This LED indicator will
be blinking green rapidly while data is transmitted or received by your wireless
clients or wireless network devices connected to your router.
LAN 1-4 (Link/Activity) LEDs These LED indicators are solid green when the
LAN ports are successfully connected to your wired network devices (which are
turned on). These LED indicators will blink green while data is transmitted or
received through your router’s LAN ports.
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TW100-BRF214
4
Application Diagram
The router is installed in a small office near the modem (supplied by your ISP “Internet Service Provider”) and physically connected to the router’s WAN port to the modem’s network
port which connects to the Internet. A network server and computers are connected to the wired Fast Ethernet LAN ports (1-4) located on the back of router thereby providing local
connectivity to access network resources and Internet access.
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TW100-BRF214
5
Basic Router Setup
Creating a Home Network
What is a network?
A network is a group of computers or devices that can communicate with each other. A
home network of more than one computer or device also typically includes Internet
access, which requires a router.
A typical home network may include multiple computers, a media player/server, a
printer, a modem, and a router. A large home network may also have a switch,
additional routers, access points, and many Internet-capable media devices such as TVs,
game consoles, and Internet cameras.
ModemConnects a computer or router to the Internet or ISP (Internet
Service Provider).
RouterConnects multiple devices to the Internet.
Switch –Connect several wired network devices to your home network. Your
router has a built-in network switch (the LAN port 1-4). If you have more wired
network devices than available Network ports on your router, you will need an
additional switch to add more wired connections.
How to set up a home network
1. For a network that includes Internet access, you’ll need:
Computers/devices with a Network port or wireless networking capabilities.
A modem and Internet service to your home, provided by your ISP (modem
typically supplied by your ISP).
A router to connect multiple devices to the Internet.
2. Make sure that your modem is working properly. Your modem is provided by your
Internet Service Provider (ISP) when you sign up for Internet service. If your modem is
not working contact your ISP to verify functionality.
3. Set up your router. See “How to setup your router” below.
4. To connect additional wired computers or wired network devices to your network,
see “Connect additional wired devices to your network” on page 7
.
How to setup your router
Refer to the Quick Installation Guide or continue to the next section “Router
Installation” on page 6
for more detailed installation instructions.
Where to find more help
In addition to this User’s Guide, you can find help below:
http://www.trendnet.com/support
(documents, downloads, and FAQs are available from this Web page))
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TW100-BRF214
6
Router Installation
Before you Install
Many Internet Service Providers (ISPs) allow your router to connect to the Internet
without verifying the information fields listed below. Skip this section for now and if
your router cannot connect to the Internet using the standard installation process, come
back to this page and contact your ISP to verify required ISP specification fields listed
below.
1. Dynamic IP
Host Name (Optional)
Clone Mac Address (Optional)
2. Static IP
IP address assigned by your ISP: _____. _____._____._____ (e.g. 215.24.24.129)
Subnet Mask: _____. _____._____._____ (e.g. 255.255.255.0)
ISP Gateway Address: _____. _____._____._____(e.g. 215.24.24.1)
Under DNS section
Domain Name Server (DNS) Address: _____. _____._____._____(e.g. 4.2.2.2)
Secondary DNS Address (optional): _____. _____._____._____(e.g. 8.8.8.8)
If you have multiple static IP addresses provided your ISP, under Does ISP provide
more IP addresses, check Yes (optional) and enter the additional IP addresses.
Alias IP Address 1: _____. _____._____._____(e.g. 215.24.24.128)
Alias IP Address 2: _____. _____._____._____(e.g. 215.24.24.127)
Alias IP Address 3: _____. _____._____._____(e.g. 215.24.24.126)
Alias IP Address 4: _____. _____._____._____(e.g. 215.24.24.125)
3. PPPoE (Dynamic IP or Static IP)
Type (Dynamic IP)
User Name: _________
Password: ________________
Retype Password: ________________
Service Name (optional): ________________
Type (Static IP)
User Name: _________
Password: ________________
Retype Password: ________________
Service Name (optional): ________________
IP Address: : _____. _____._____._____(e.g. 215.24.24.129)
Primary DNS Address: _____. _____._____._____(e.g. 215.24.24.50)
Secondary DNS Address: _____. _____._____._____(e.g. 215.24.24.51)
4. PPTP
Type (Dynamic IP or Static IP)
PPTP Account: ________________
PPTP Password: ________________
Retype Password: ________________
Service IP: _____. _____._____._____(e.g. 215.24.24.130)
My IP Address: _____. _____._____._____ (e.g. 215.24.24.129)
Subnet Mask:_____. _____._____._____(e.g. 255.255.255.0)
Gateway:_____. _____._____._____(e.g. 215.24.24.1)
5. L2TP
Type (Dynamic IP or Static IP)
PPTP Account: ________________
PPTP Password: ________________
Retype Password: ________________
Service IP: _____. _____._____._____(e.g. 215.24.24.130)
My IP Address: _____. _____._____._____ (e.g. 215.24.24.129)
Subnet Mask:_____. _____._____._____(e.g. 255.255.255.0)
Gateway:_____. _____._____._____(e.g. 215.24.24.1)
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TW100-BRF214
7
Hardware Installation
1. Verify that you have an Internet connection when connecting your computer directly
to your modem.
2. Turn off your modem.
3. Disconnect the Network cable from your computer to your modem.
4. Using a Network cable, connect the WAN port on the router to your modem.
5. Using another Network cable, connect your computer to one of the four LAN ports on
the router.
6. Connect the power adapter to your router and then to a power outlet.
7. Turn on your modem.
8. Verify that the following front panel LED indicators on your router: Power (Solid
Green), LAN 1, 2, 3, or 4 (Solid/Blinking Green for ports for which devices are
connected), WAN (Solid/Blinking Green).
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TW100-BRF214
8
Setup Wizard
1. Open your web browser (e.g. Internet Explorer, Firefox, Safari, Chrome, or Opera) and
go to http://192.168.10.1
. Your router will prompt you for a user name and password.
2. Next to Language, click the drop-down list to select your preferred language. Enter
the default user name and password and then click Login.
Default User Name: admin
Default Password: admin
3. Click Quick Setup to start the Setup Wizard.
4. Select your Time Zone from the drop-down list and set the Daylight Savings Time if
applicable. Click Next.
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TW100-BRF214
9
5. This section determines what method the router will use to interface with your ISP
service. Dynamic IP is typical for most ISP services.
6. Select Dynamic IP configuration (Dynamic IP is typical for most ISP services. Verify
with your ISP).
Note: If you know that your ISP requires a configuration other than Obtain IP
Automatically (Dynamic IP) or if you are having difficulty completing the router
installation, please contact your ISP to verify all required settings for one of the options
listed on page 6. The options listed on page 6 match the settings options available to
choose from.
7. Click Next to bypass the cloning of your computer’s MAC address (Cloning is required
for instances when your router would need to be identified as the same address as your
computer).
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TW100-BRF214
10
8. Click Next to use your ISP DNS service.
Note: Otherwise, if you would like to specify your own DNS servers to use, check the
Enable box and under Primary and Secondary DNS address fields enter in the IP
addresses of DNS servers you would like to use.
9. Click Restart.
10. Wait for your router to reboot.
11. Verify you have an Internet connection by opening a Web browser on your
computer.
Note: If you cannot access the Internet, power down your modem and router again.
Occasionally certain modems need to be power cycled to adopt new router settings.
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TW100-BRF214
11
Connect additional wired devices to your network
You can connect additional computers or other network enabled devices to your
network by using Network cables. Connect them to one of the available LAN ports
labeled 1,2,3,4 on your router. Check the status of the LED indicators (1, 2, 3, or 4) on
the front panel of your router to ensure the physical cable connection from your
computer or device.
Note: If you encounter issues connecting to your network, there may be a problem with
your computer or device network settings. Please ensure that your computer or device
network settings (also called TCP/IP settings) are configured to obtain IP address settings
automatically (also called dynamic IP address or DHCP) and to Obtain DNS Server
address settings automatically.
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TW100-BRF214
12
Access Control Filters
Access control basics
Advanced Setup > Firewall
Client Filtering
Advanced Setup > Firewall > Client Filtering
You may want apply client filtering (outbound packet filter) to deny access to specific
types of traffic from computers or devices on your local network to the Internet. You
can also apply a specified schedule when you would like the filters activated or
deactivated.
1. Log into your router management page (see “Access your router management page
on page 16
).
2. Click on Advanced Setup and click on Firewall, then click on Client Filtering.
3. In the entry list, choose an entry to modify and enter the required information.
IPEnter the IP address range (use last IP address number only such as
192.168.10.101-192.168.10.110) to apply the filter. IP addresses not included in
the range will not be blocked from accessing the traffic specified in the filter.
PortEnter the range of port numbers to block or deny access. To specify all
port numbers, enter the range 1 ~ 65535 to block all access. For a range of
specific port numbers, enter a port range within the range of 1-65535 (e.g. 21 ~
30) and for a single port, enter the same number in both range fields (e.g. 21 ~
21).
Type Select the protocol type of traffic to block or deny access. TCP or UDP.
Examples: To block web browsing access, under Port enter the port range 80 ~ 80
and under Type, select TCP.
To block FTP file transfer access, under Port enter the port range 20 ~ 21 and under
Type, select TCP.
4. The remaining fields allow you to specify a set schedule when the filter is activated.
Note: Please ensure that the router System Time is configured correctly under System >
System Time to ensure the filter applies accordingly to the schedule defined. To configure
the System Time, see page 17
.
Block TimeSelect Block to specify a set schedule when the filter should be
activated or deactivated, otherwise, select Always to keep the filter activated
at all times.
Day If the Block option under Block Time is selected and you are defining a
schedule, click the drop-down list and select the days.
EnableCheck this option to enable the access filter. The access filter will not
in affect/activated if the option is unchecked.
5. Click Apply at the bottom of the page to apply the changes. After the settings have
been applied, click Continue on the following page.
Note: If you would like to discard the changes, click Cancel before you click Apply.
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TW100-BRF214
13
MAC address filters
Advanced Setup > Firewall > MAC Control
Every network device has a unique, 12-digit MAC (Media Access Control) address. Using
MAC filters, you can allow or deny specific computers and other devices from using this
router’s wired or wireless network.
1. Log into your router management page (seeAccess your router management page
on page 16
).
2. Click on Advanced Setup and click on Firewall, then click on MAC Control.
3. Add the MAC addresses to the MAC Address Control List first before applying the
MAC filter function.
Note: MAC filter can be configured to allow access to the listed MAC addresses and
deny all others unlisted or vice versa. The recommended function is to choose to only
allow access to the MAC addresses listed and deny all others unlisted because it is easier
to determine the MAC addresses of devices in your network then to determine which
MAC addresses you do not want to allow access.
To add MAC addresses to the MAC Address Control List, you can choose to add MAC
addresses by manually typing the address in manually or selecting a MAC address from
your router’s DHCP client list.
Add MAC Address - Enter the 12-digit MAC address in the fields provided .
(e.g. 00-11-22-AA-BB-CC)
OR
DHCP Client - Click the DHCP Client drop-down list and select the MAC
address you would like to add. After you select the MAC address, click Clone to
copy the MAC address to the Add MAC Address fields.
Note: You can also check the router DHCP List for the MAC addresses of the
devices on your network, see “Setup the DHCP server on your router” on
page
19 or refer to your computer or device documentation to find the MAC address.
4. Click Apply at the bottom of the page to add the address to the MAC Address Control
List. After the settings have been applied, click Continue on the following page.
Note: If you would like to discard the changes, click Cancel before you click Apply.
To verify that the MAC address is added, the MAC address entry should appear in the
MAC Address Control List.
Note: To delete a MAC address from the MAC Address Control list, click Delete next to
the entry. Then click Apply at the bottom of the page to apply the changes and after the
changes have been applied, click Continue on the following page.
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TW100-BRF214
14
4. Once you have added all of the MAC addresses to the MAC Address Control List,
review the MAC Address Control options and select the option to apply.
Note: Do not configure this setting until you have added the MAC addresses to the MAC
Address Control List first. The recommended option is to only Deny all to pass except the
following MACs which will only allow the MAC addresses listed in the MAC Address
Control List and deny all others devices that are unlisted.
MAC Address Control
o Enable - Check the option to enable the MAC address control feature.
If this option is unchecked MAC address control will be disabled.
o Allow all to pass except the following MACsSelecting this option
will allow all other devices access to your network and only deny the
device MAC addresses listed in the MAC Address Control List.
o Deny all to pass except the following MACsSelect this option will
deny all other devices access to your network and only allow the
device MAC addresses listed in the MAC Address Control List.
5. Click Apply at the bottom of the page to apply the changes. After the settings have
been applied, click Continue on the following page.
Note: If you would like to discard the changes, click Cancel before you click Apply.
Domain/URL Filters
Advanced Setup > Firewall > URL Filter
You may want to block computers or devices on your network access to specific
websites (e.g. www.xxxxxxxx.com
, etc.), also called domains or URLs (Uniform Resource
Locators). You may also enter a keyword (e.g. instead of complete URL to generally
block computers or devices access to websites that may contain the keyword in the URL
or on the web page.
1. Log into your router management page (see “Access your router management page
on page 16
).
2. Click on Advanced Setup and Firewall, then click on URL Filter.
3. Review the Domain/URL blocking settings.
URL filter functionSelect Enabled to enable URL filtering on your router.
Selecting disabled will disable the URL filtering function on your router.
Add URL - Enter the Website/URL/domain or keyword to block access. (e.g.
www.xxxxxxxxx.com, xxxxxxxxx
or sports, etc)
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TW100-BRF214
15
For each website/URL/domain you enter, click Apply at the bottom of the page to add
the website/URL/domain to the list. After the settings have been applied, click Continue
on the following page.
Note: If you would like to discard the changes, click Cancel before you click Apply.
To verify that the entries were successfully added, check if the entries appear in the list.
To delete a website/URL/domain entry, click on the entry in the list, then click Delete.
Once the entry is removed from the list, click Apply at the bottom of the page to apply
the changes. After the settings have been applied, click Continue on the following page.
Note: If you would like to discard the changes, click Cancel before you click Apply.
To verify that the entries were successfully removed, check if the entries are no longer
listed.
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TW100-BRF214
16
Advanced Router Setup
Access your router management page
Note: Your router management page http://192.168.10.1 is accessed through the use of
your Internet web browser (e.g. Internet Explorer, Firefox, Chrome, Safari, Opera) and
will be referenced frequently in this User’s Guide.
1. Open your web browser (e.g. Internet Explorer, Firefox, Safari, Chrome, or Opera) and
go to http://192.168.10.1
. Your router will prompt you for a user name and password.
2. Enter the default user name and password and then click OK.
Note: Other web browsers may display a Log In or Submit button instead of OK.
Default User Name: admin Default Password: admin
3. At the main Login page, click on Advanced Setup.
Change your router login password
Advanced Setup > System > Administrator Settings
1. Log into your router management page (see “Access your router management page
on page 16
).
2. Click on Advanced Setup and click on System, then click on Administrator Settings.
3. Under the Password section, in the Current Password field, type in your current
password assigned to the router (Default Password: admin). In the Password field, enter
the new password, and in the Re-type password field, retype the new password again
to confirm.
4. Click Apply at the bottom of the page to apply the changes. After the settings have
been applied, click Continue on the following page.
Note: If you would like to discard the changes, click Cancel before you click Apply.
Note: If you change the router login password, you will need to access the router
management page using the User Name “admin” and the new password instead of the
default password “admin”.
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TW100-BRF214
17
Set your router date and time
Advanced Setup > System > System Time
1. Log into your router management page (see “Access your router management page
on page 16
).
2. Click on Advanced Setup and click on System, then click on System Time.
3. Next to Set Time Zone, click the drop-down list to select your Time Zone.
4. You can choose one of the following options to set your router date and time:
Set the Time Set your router date and time manually in the Set the Time
section. Click Apply at the bottom of the page to apply the changes then click
Continue on the following page.
Note: Time is specified in 24-hour format.
OR
Default SNTP Server (Optional) Set your router date and time to synchronize
with an SNTP (Simple Network Time Protocol) server address (e.g.
pool.ntp.org). Check the Enable option and enter the SNTP server address in
the Server IP field, (e.g. pool.ntp.org).
Note: SNTP servers are used for computers and other network devices to
synchronize time across an entire network.
5. Additionally, you can configure the Daylight Savings Time settings if it applied in your
Time Zone.
Next to Set Daylight Saving (Optional), check the Enable option and click the drop-down
lists to set the annual range when daylight savings time is in effect.
6. Click Apply at the bottom of the page to apply the changes. After the settings have
been applied, click Continue on the following page.
Note: If you would like to discard the changes, click Cancel before you click Apply.
You can verify the time/date settings next to Local Time at the top of the page. Local
Time displays the current date and time set on your router.
1 / 1

Trendnet TW100-BRF214 User guide

Category
Networking
Type
User guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Ask the document