Metropolitan N7257-613 User manual

Type
User manual
Fig.1
INSTALLATION INSTRUCTIONS FOR
N7257-613
READ AND SAVE THESE INSTRUCTIONS
WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER
AVERTISSEMENT!COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DO DISJONCTEU
ASSEMBLINGTHEFIXTURE(Fig.1)
1 Shutoffpoweratthefuseboxorcircuitbreakerbox.If
necessary,removetheexistingfixtureanditsmounting
hardware.
2 Carefullyremovethenewfixturefromthecartonandcheck
thatallpartsareincludedasshownintheillustration.
3 Fixedthesidearm(N)ontothespliceboxwithscrew s(M)
(size:#5320.25"L).
4 Secured the side arm (N) to fixture body (O) with screws (M)
(size:#5320.25"L).
5 Thisfixtureincludesthree12",andone6"rods.Determinethe
desiredhangingheightandthreadrods(K)(Part#W351613),
(L)(Part#W35H613)toloop(J).Feedthefixturewireand
saf etycablecarefullythrougheachrod.Pleaseremovethe
nippleifinstallingwithone6"rodonly.
6 Threadtheloop(J)torodunitsnug.
7 Connecttheloops(J)usingquicklink(I).Thequicklink(I)must
becompletelyclosedwheninstalled.
8 Installa1/4 " IPSpipe(A)(notprovided)withoneendsecurely
mountedtoabeamofastructuralmember.Theotherend
shouldprotrudethroughthecenteroftheoutletboxasshown.
9 Securethehexnut(B)ontothepipe(A)andthensecurethe
hickey(C)tightly.
10 Threadhexnut(D)ontothenipple(E),thenthreadthenipple
(E)intothehickey(C);andsecurewithhexnut(D)ontheother
endofnipple(E).Threadloop(H)ontonipple(E)tightly.
11 Slipthelockcollar(G)andcanopy(F)overtherod.
12 Openquicklink(I)andconnectittoloop(H/J).Thenthread
thequicklinkclosed.
13 Feedthefixtureswiresandsafetycablethroughtheceiling
loop(H)andnipple(E)andallowthemtoexitthroughtheside
ofhickey(C).Runsafetycablethroughthehickey(C)onecir cle
andsecuresafetycablewithsetscrewassemblyandsetscrew.
CONNECTINGTHEWIRES(Fig.2)
14 ConnecttheelectricalwiresasshowninFig.2,makingsurethat
allwireconnectorsaresecured.Ifyouroutlethasaground
wire(greenorbarecopper),connectthefixture'sgroundwire
toit.Afterthewiresareconnected,tuckthemneatlyintothe
outletbox.
15 Raisecanopy(F)ontotheceilingloop(H) tofixwithlockcollar
(G)
WARNING: This luminaire must be mounted or supported
independently of an outlet box.
COMPLETINGTHEINSTALLATION(Fig.3)
1.
Installthebulb(s) (S)(notincluded)(8xMax60WMediumbase)
into socket in accordance with the fixture’s specifications.
(DO
NOT EXCEED THE SPECIFIED WA TTAGE!) (NE PAS
DEPASSERLAAPUISSANCENOMINALEMAXIMALE!)
2. Takeoutthecrystals(Q)(total32PCS)attachedtofixturebody
usinglongscrews(R)provided,securewithsteelballnut(P),add
severalplasticwashersonthelongscrew(R)ifneeded.Adjust
thecrystalsuntiltheyaresecuredtightly.
Yourinstallationisnowcomplete.Returnpowertojunction
boxand
testthefixture.
IMPORTANT:Fixtureshould be installedby a qualified electrician
toensureproperwiringandinstallation.
Fig.2
  • Page 1 1

Metropolitan N7257-613 User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI