Omega EP310S
The Omega EP310S is a two-component epoxy resin adhesive with a very low viscosity. It is ideal for installing HBM foil strain gages (SG) of the Ÿ, C, À, U, G, K and LE series onto commonly used metals.
It has a temperature range of -270 to +260°C for zero-point related measurements and -270 to +310°C for non zero-point related measurements.
The EP310S adhesive bonds extremely well to all commonly used metals and is easy to use, thanks to its low viscosity. It provides a thin layer of adhesive, making it economical.
Omega EP310S
The Omega EP310S is a two-component epoxy resin adhesive with a very low viscosity. It is ideal for installing HBM foil strain gages (SG) of the Ÿ, C, À, U, G, K and LE series onto commonly used metals.
It has a temperature range of -270 to +260°C for zero-point related measurements and -270 to +310°C for non zero-point related measurements.
The EP310S adhesive bonds extremely well to all commonly used metals and is easy to use, thanks to its low viscosity. It provides a thin layer of adhesive, making it economical.
Omega EP310S
The Omega EP310S is a two-component epoxy resin adhesive with a very low viscosity. It is ideal for installing HBM foil strain gages (SG) of the Ÿ, C, À, U, G, K and LE series onto commonly used metals.
It has a temperature range of -270 to +260°C for zero-point related measurements and -270 to +310°C for non zero-point related measurements.
The EP310S adhesive bonds extremely well to all commonly used metals and is easy to use, thanks to its low viscosity. It provides a thin layer of adhesive, making it economical.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI