Ram Center / Automated Equipment, LLC GDF14 Datasheet

Brand
Ram Center / Automated Equipment, LLC
Model
GDF14
Type
Datasheet
© 2000 McDonald’s Corporation Printed in FEB 05/ Revised in FEB 05
Page 1 of 1
Arch Fry Dispenser
Planned Maintenance
System: Maintenance
Requirement Card
(
MRC
)
Automated Equipment LLC.
Model GDF14
Pictures and additional
information:
Corresponding Chapter of
Equipment Manual
When
Semi-Annually
Tools
Clean, sanitized towels
RAM-GDF14 manual
Precaution
Hazard Communication Standard (HCS) - The procedure(s) in this manual include the
use of chemical products. These chemical products will be highlighted with italic-faced
letters followed by the abbreviation (HCS). See Hazard Communication Standard (HCS)
manual for the appropriate Material Safety Data Sheet(s)
Planned Maintenance
1. Turn the dispenser power switch to the OFF position.
2. Unplug the dispenser power cord from the wall.
3. Inspect the power cord for damage.
4. Remove the hopper from the dispenser, and clean the dispenser (refer to the Daily Closing
procedure). Reassemble the dispenser WITHOUT the hopper.
5. Inspect the hopper and drum for damage.
6. Inspect the dispenser for loose hardware.
7. Plug the dispenser into the wall outlet.
8. Turn the Power Switch to the ON position.
9. Calibrate the dispenser weighing system. (Refer to procedure in your manual)
10. Turn the power switch OFF.
11. Finish reassembling the dispenser.
  • Page 1 1

Ram Center / Automated Equipment, LLC GDF14 Datasheet

Brand
Ram Center / Automated Equipment, LLC
Model
GDF14
Type
Datasheet
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents