ICP uPAC-5001 User manual

Type
User manual

ICP uPAC-5001 is an advanced programmable logic controller(PLC) with industrial-grade hardware, flexible C language development environment, and rich communication interfaces. Here are some of its features and possible use cases:

Features:

  • Powerful 32-bit ARM9 CPU running at 400MHz
  • 128MB DDR3 RAM, 16MB Flash ROM
  • Wide voltage input range (9-30 VDC)
  • Dual Ethernet ports (10/100Base-T)
  • RS-232/485 interface
  • 8 digital inputs (24VDC), 8 relay outputs (30VDC/0.5A)
  • Support for various communication protocols (Modbus, CANopen, DCON)
  • Industrial-grade design with operating temperature range of -40 to 85 °C

ICP uPAC-5001 is an advanced programmable logic controller(PLC) with industrial-grade hardware, flexible C language development environment, and rich communication interfaces. Here are some of its features and possible use cases:

Features:

  • Powerful 32-bit ARM9 CPU running at 400MHz
  • 128MB DDR3 RAM, 16MB Flash ROM
  • Wide voltage input range (9-30 VDC)
  • Dual Ethernet ports (10/100Base-T)
  • RS-232/485 interface
  • 8 digital inputs (24VDC), 8 relay outputs (30VDC/0.5A)
  • Support for various communication protocols (Modbus, CANopen, DCON)
  • Industrial-grade design with operating temperature range of -40 to 85 °C
µPAC-5000 Series (C Language Based) User Manual, Version 1.0.1 beta 0 Page: 1
Copyright © 2010 ICP DAS Co., Ltd. All Rights Reserved. E-mail: service@icpdas.com
μ μ
μ μ
μ μ
μ μ
μ μ
μ μ
µPAC-5000 Series (C Language Based) User Manual, Version 1.0.1 beta 0 Page: 2
Copyright © 2010 ICP DAS Co., Ltd. All Rights Reserved. E-mail: service@icpdas.com
Warranty
All products manufactured by ICP DAS are under warranty
regarding defective materials for a period of one year,
beginning from the date of delivery to the original purchaser.
Warning
ICP DAS assumes no liability for any damage resulting from
the use of this product.ICP DAS reserves the right to change
this manual at any time without notice. The information
furnished by ICP DAS is believed to be accurate and reliable.
However, no responsibility is assumed by ICP DAS for its
use, not for any infringements of patents or other rights of
third parties resulting from its use.
Copyright
Copyright @ 2009 by ICP DAS Co., Ltd. All rights are
reserved.
Trademark
The names used for identification only may be registered
trademarks of their respective companies.
If you have any problem, please feel free to contact us.
You can count on us for quick response.
µPAC-5000 Series (C Language Based) User Manual, Version 1.0.1 beta 0 Page: 3
Copyright © 2010 ICP DAS Co., Ltd. All Rights Reserved. E-mail: service@icpdas.com
1.1.1.1.
1.1.1.2.
1.1.1.3.
1.1.1.4.
1.1.3.1.
1.1.3.2.
1.1.3.3.
1.1.3.4.
1.3.1.1. μ μ
1.3.1.2. μ μ
1.3.1.3. μ μ
1.3.1.4. μ μ
1.3.1.5. μ μ
1.3.1.6. μ μ
µPAC-5000 Series (C Language Based) User Manual, Version 1.0.1 beta 0 Page: 4
Copyright © 2010 ICP DAS Co., Ltd. All Rights Reserved. E-mail: service@icpdas.com
μ
2.4.1.1.
2.4.1.2.
μ
µPAC-5000 Series (C Language Based) User Manual, Version 1.0.1 beta 0 Page: 5
Copyright © 2010 ICP DAS Co., Ltd. All Rights Reserved. E-mail: service@icpdas.com
µPAC-5000 Series (C Language Based) User Manual, Version 1.0.1 beta 0 Page: 6
Copyright © 2010 ICP DAS Co., Ltd. All Rights Reserved. E-mail: service@icpdas.com
µPAC-5000 Series (C Language Based) User Manual, Version 1.0.1 beta 0 Page: 7
Copyright © 2010 ICP DAS Co., Ltd. All Rights Reserved. E-mail: service@icpdas.com
µPAC-5000 Series (C Language Based) User Manual, Version 1.0.1 beta 0 Page: 8
Copyright © 2010 ICP DAS Co., Ltd. All Rights Reserved. E-mail: service@icpdas.com
μ
μ
1.1.1.1.
1.1.1.2.
1.1.1.3.
1.1.1.4.
µPAC-5000 Series (C Language Based) User Manual, Version 1.0.1 beta 0 Page: 9
Copyright © 2010 ICP DAS Co., Ltd. All Rights Reserved. E-mail: service@icpdas.com
μ
µPAC-5000 Series (C Language Based) User Manual, Version 1.0.1 beta 0 Page: 10
Copyright © 2010 ICP DAS Co., Ltd. All Rights Reserved. E-mail: service@icpdas.com
μ
1.1.3.1.
µPAC-5000 Series (C Language Based) User Manual, Version 1.0.1 beta 0 Page: 11
Copyright © 2010 ICP DAS Co., Ltd. All Rights Reserved. E-mail: service@icpdas.com
1.1.3.2.
µPAC-5000 Series (C Language Based) User Manual, Version 1.0.1 beta 0 Page: 12
Copyright © 2010 ICP DAS Co., Ltd. All Rights Reserved. E-mail: service@icpdas.com
1.1.3.3.
µPAC-5000 Series (C Language Based) User Manual, Version 1.0.1 beta 0 Page: 13
Copyright © 2010 ICP DAS Co., Ltd. All Rights Reserved. E-mail: service@icpdas.com
1.1.3.4.
µPAC-5000 Series (C Language Based) User Manual, Version 1.0.1 beta 0 Page: 14
Copyright © 2010 ICP DAS Co., Ltd. All Rights Reserved. E-mail: service@icpdas.com
µPAC-5000 Series (C Language Based) User Manual, Version 1.0.1 beta 0 Page: 15
Copyright © 2010 ICP DAS Co., Ltd. All Rights Reserved. E-mail: service@icpdas.com
µPAC-5000 Series (C Language Based) User Manual, Version 1.0.1 beta 0 Page: 16
Copyright © 2010 ICP DAS Co., Ltd. All Rights Reserved. E-mail: service@icpdas.com
µPAC-5000 Series (C Language Based) User Manual, Version 1.0.1 beta 0 Page: 17
Copyright © 2010 ICP DAS Co., Ltd. All Rights Reserved. E-mail: service@icpdas.com
µPAC-5000 Series (C Language Based) User Manual, Version 1.0.1 beta 0 Page: 18
Copyright © 2010 ICP DAS Co., Ltd. All Rights Reserved. E-mail: service@icpdas.com
1.3.1.1. μ μ
µPAC-5000 Series (C Language Based) User Manual, Version 1.0.1 beta 0 Page: 19
Copyright © 2010 ICP DAS Co., Ltd. All Rights Reserved. E-mail: service@icpdas.com
µPAC-5000 Series (C Language Based) User Manual, Version 1.0.1 beta 0 Page: 20
Copyright © 2010 ICP DAS Co., Ltd. All Rights Reserved. E-mail: service@icpdas.com
1.3.1.2. μ μ
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83
  • Page 84 84
  • Page 85 85
  • Page 86 86
  • Page 87 87
  • Page 88 88
  • Page 89 89
  • Page 90 90
  • Page 91 91
  • Page 92 92
  • Page 93 93
  • Page 94 94
  • Page 95 95
  • Page 96 96
  • Page 97 97
  • Page 98 98
  • Page 99 99
  • Page 100 100
  • Page 101 101
  • Page 102 102
  • Page 103 103
  • Page 104 104
  • Page 105 105
  • Page 106 106
  • Page 107 107
  • Page 108 108
  • Page 109 109
  • Page 110 110
  • Page 111 111
  • Page 112 112
  • Page 113 113
  • Page 114 114
  • Page 115 115
  • Page 116 116
  • Page 117 117
  • Page 118 118
  • Page 119 119
  • Page 120 120
  • Page 121 121
  • Page 122 122
  • Page 123 123
  • Page 124 124
  • Page 125 125
  • Page 126 126
  • Page 127 127
  • Page 128 128
  • Page 129 129
  • Page 130 130
  • Page 131 131

ICP uPAC-5001 User manual

Type
User manual

ICP uPAC-5001 is an advanced programmable logic controller(PLC) with industrial-grade hardware, flexible C language development environment, and rich communication interfaces. Here are some of its features and possible use cases:

Features:

  • Powerful 32-bit ARM9 CPU running at 400MHz
  • 128MB DDR3 RAM, 16MB Flash ROM
  • Wide voltage input range (9-30 VDC)
  • Dual Ethernet ports (10/100Base-T)
  • RS-232/485 interface
  • 8 digital inputs (24VDC), 8 relay outputs (30VDC/0.5A)
  • Support for various communication protocols (Modbus, CANopen, DCON)
  • Industrial-grade design with operating temperature range of -40 to 85 °C

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI