Vortex Summit SS-P Adjusting Instructions

Vortex
Brand
Vortex
Model
Summit SS-P
Category
Tripods
Type
Adjusting Instructions

Vortex Summit SS-P combines a 3-way quick-release pan head for smooth handling with a compact size to provide solid support for your optics. Its 5-section legs allow for maximum height with minimum packing length, while the light weight makes it easy to carry. The twist leg locks enable variable height adjustment and reduce bulk, and the 3-way pan head with quick-release plate allows for fast attachment of optics. The variable leg angle adjustments provide flexible positioning, and the balance hook holds extra weight for greater stability in windy conditions.

Vortex Summit SS-P combines a 3-way quick-release pan head for smooth handling with a compact size to provide solid support for your optics. Its 5-section legs allow for maximum height with minimum packing length, while the light weight makes it easy to carry. The twist leg locks enable variable height adjustment and reduce bulk, and the 3-way pan head with quick-release plate allows for fast attachment of optics. The variable leg angle adjustments provide flexible positioning, and the balance hook holds extra weight for greater stability in windy conditions.

- 3 -
- 2 -
TRIPOD KIT
TM
The Summit
TM
SS-P combines a 3-way quick-release pan head for smooth
handling with a compact size to provide solid support for your optics.
Height Range
Maximum Load
Leg Sections
Leg Angles
Weight
Folded Height
Folded Width
6.3–54.5”
5 pounds
5
3
2.0 pounds
14.0”
4.5”
5-section legs for maximum height with minimum
packing length.
Light weight for an easy carry.
Twist leg locks for variable height adjustment and
reduced bulk.
3-way pan head with quick-release plate for fast
attachment of optics.
Variable leg angle adjustments allow for flexible
positioning.
Balance hook holds extra weight for greater
stability in windy conditions.
Rubber feet stand sure-footed on slick surfaces.
Features
Specifications
Leg Adjustment
Twist Locks
Center Column
Column Height
Adjustment Knob
Attachable
Balance Hook
Rubber
Foot
Anodized
Aluminum
Legs
3-Way Pan Head
- 5 -
- 4 -
TRIPOD KIT
TM
Plate Angle
Adjustment Knob
To help stabilize the tripod in windy conditions, attach the Balance Hook
and hang a weight (not supplied) from it.
Balance Hook
Adjusting the 3-way pan head
Grasp the Control Arm and rotate counter-clockwise to adjust the pan
head position, then rotate clockwise to secure in place. To detach the
quick-release plate, flip the Plate Release Lever out and slide the quick-
release plate out of the holder. When returning the quick-release plate
to the holder, be sure to secure it in place by pressing the lever firmly
against the holder.
Loosen the Plate Angle
Adjustment Knob to rotate
the platform angle.
Rotate the Control Arm
to adjust the pan and tilt
action.
Quick-Release
Plate Lever
Adjusting the tripod height
Loosen and tighten the Column Height
Adjustment Knob to raise or lower the
center column.
Quick-Release Plate
To lengthen the tripod leg, grasp the Rubber
Foot at the very end of the tripod leg and rotate
counter-clockwise until you have felt four distinct
clicks. While maintaining grip on rubber end
section, extend the leg to desired length. When leg
is at desired length, twist the rubber end section
clockwise to lock in place. To collapse the legs, grasp
the rubber end section and rotate counter-clockwise
until you have felt four clicks. Locks will then be
released and leg can be collapsed. Twist clockwise to
lock legs. Legs extend to a maximum of five sections.
Column Height
Adjustment Knob
Twist the rubber foot
to lock and unlock for
length adjustments.
- 7 -
- 6 -
TRIPOD KIT
TM
Visit www.vortexoptics.com for more information. Canadian customers
may visit www.vortexcanada.net for customer service information.
The VorTex 3-Year WarranTY
This tripod is warranted to be free of defects in materials and
workmanship for three years after purchase. If found to be defective
in materials or workmanship upon our inspection, Vortex Optics will
repair or replace the product or part.
Rest assured, if your tripod should ever require
repair, all you need do is contact Vortex Optics
at 800-426-0048 for prompt, professional, and
friendly service.
Vortex Optics
2120 West Greenview Drive
Middleton, WI 53562
[email protected]
Adjusting the leg angle
Set the legs of the Summit SS-P to one of three angles. To adjust the leg
angle, slide the Release Tab to the right and pivot the leg outward to the
desired angle. To lock the leg angle, move the tripod leg up and down to
set the Release Tab in one of three positions.
For very low heights, the lower section of the
center column can be removed as shown here.
Slide the Release Tab to adjust and lock the leg in one of three angles.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Vortex Summit SS-P Adjusting Instructions

Vortex
Brand
Vortex
Model
Summit SS-P
Category
Tripods
Type
Adjusting Instructions

Vortex Summit SS-P combines a 3-way quick-release pan head for smooth handling with a compact size to provide solid support for your optics. Its 5-section legs allow for maximum height with minimum packing length, while the light weight makes it easy to carry. The twist leg locks enable variable height adjustment and reduce bulk, and the 3-way pan head with quick-release plate allows for fast attachment of optics. The variable leg angle adjustments provide flexible positioning, and the balance hook holds extra weight for greater stability in windy conditions.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents