VADDIO PRODUCTIONView HD-SDI MV Installation and User Manual

Brand: VADDIO

Model: PRODUCTIONView HD-SDI MV

Category: Video converters

Type: Installation and User Manual

ProductionVIEW HD-SDI MV Manual - Document Number 342-0318 Rev. B

PRODUCTIONVIEW™ HD-SDI MV

HD-SDI Camera Control Console with Integrated Multiviewer,

Touch Screen Control Option, Multi-View Control Panel Layout

Options and Expanded I/O Capabilities

Part Number 999-5655-000 North America

Part Number 999-5655-001 International

Installation and User Guide

ProductionVIEW HD-SDI MV

ProductionVIEW HD-SDI MV Manual - Document Number 342-0318 Rev. B Page 2 of 36

Inside Front Cover - Blank

ProductionVIEW HD-SDI MV

ProductionVIEW HD-SDI MV Manual - Document Number 342-0318 Rev. B Page 3 of 36

Overview:

The Vaddio™ ProductionVIEW HD-SDI MV

Production Switcher with integrated camera

controller and multiviewer is a powerful, cost

effective and easy to operate platform for live

presentation environments. With Vaddio’s

revolutionary TeleTouch™ Touch Screen Control

Panel (optional, sold separately), production

operators can easily see and switch all live video

feeds and create “video thumbnails” of preset

camera shots with the touch of their finger.

ProductionVIEW HD-SDI MV is a broadcast

quality 6 x 2 multi-format, seamless video mixer

that also provides two discrete outputs for dual

bus program feeds (two independent 6 x 1

switchers/mixers). Accepting any combination of

HD-SDI/SDI input signals from inputs 1 through 5

with Input 6 providing a DVI-I input, the

ProductionVIEW HD-SDI MV supports HD

resolutions up to and including 1080p/60fps.

The optional TeleTouch™ Touch Screen Control

Panel allows the camera operator to see and

switch all the live video feeds by simply touching

the windows that they want controlled. The

Vaddio TeleTouch Touch Screens are available in

two sizes; 18.5” rack-mount (7-RU) version or a

22” with base. Each camera input can have up to

12 stored “video thumbnails” of each preset

camera shot. These video thumbnail images

provide an easy way to identify and recall preset

camera positions.

The new Multi-View Touch Screen Control Panel

Layout Options for the TeleTouch Touch Screen

Control Panel allows integrators to match the

touch screen layout to the number of camera,

computer or other video input sources that are

connected to the ProductionVIEW HD-SDI MV.

The Single or Dual Bus Multiviewer Output mode

allows separate Preview and Multiviewer Video

Outputs to be displayed. The Preview and

Multiviewer Video Output Menus are used to

select and set the Preview or Multiviewer video

output resolutions.

The Program outputs provide simultaneous HD-

SDI program output and HDMI program outputs.

The Preview outputs have been configured with an

HD-SDI output and dual HDMI outputs. One of the

HDMI outputs can be used as a second preview

output or as a multiviewer preview output (with the

use of the Vaddio supplied HDMI to DVI-D cable

adapter) supporting a Vaddio TeleTouch Touch

Screen Control Panel.

The ProductionVIEW HD-SDI MV control surface is laid out to allow a novice to operate the system with minimal

training.

ProductionVIEW HD-SDI MV

Camera Control Console

*ProductionVIEW HD MV TeleTouch 22”

Touch Screen Control Panel

*Optional

Multi-View Four-Input Layout Display for

*TeleTouch Touch Screen Control Panel

(Simulated Multiviewer Output)

ProductionVIEW HD-SDI MV

ProductionVIEW HD-SDI MV Manual - Document Number 342-0318 Rev. B Page 4 of 36

Optional TeleTouch Touch Screen Control Panel with Multi-View Panel Layout Options:

The TeleTouch Touch Screen Control Panel (optional) with the new Multi-View touch screen control panel layout

options allows integrators to match the touch screen layout to the number of camera, computer or other video

input sources that are connected to the ProductionVIEW HD-SDI MV.

The Multi-View feature maximizes the potential screen size available for previewing live feeds and prevents

unused blank multi-viewer input windows from being seen. Multi-View allows the user to choose from four to six

input windows and provides two larger preview and program windows with red and green tally window borders,

which indicate the current output selections.

The TeleTouch Touch Screen Control Panel also eliminates the need for individual preview monitors and allows

the camera operator to see and switch all the live video feeds by simply touching the windows that they want

controlled. Each camera input can have up to 12 stored “video thumbnails” of each preset camera shot. These

video thumbnail images provide an easy way to identify and recall preset camera positions on a per input basis in

the preview window that greatly simplifies overall console operation.

Key Technical Features:

 Vaddio TeleTouch Touch Screen Controller (optional): The Vaddio TeleTouch Touch Screen Controller

allows the operator to see and switch all live feeds by touching the windows. The ProductionVIEW HD-SDI

MV outputs can provide either a standard preview output or a multiviewer preview output with support for two

monitors, one of the outputs supporting a Vaddio TeleTouch Touch Screen Controller. The Vaddio TeleTouch

Touch Screens are available in two sizes; 18.5” (P/N: 999-5520-185) rack-mount or a standard 22” (P/N:

999-5520-022) with base.

TeleTouch Touch Screen Control Panel with

Multi-View Four-Input Layout

TeleTouch Touch Screen

Control Panel with

Multi-View Five-In

ut La

out

TeleTouch Touch Screen

Control Panel with

Multi-View Six-In

ut La

out

TeleTouch Touch Screen Control Panel with

Multi-View Four-Input Layout

Two-In

uts Dis

TeleTouch Touch Screen Control Panel with

Multi-View Four-Input Layout

Three-In

uts Dis

ProductionVIEW HD-SDI MV

ProductionVIEW HD-SDI MV Manual - Document Number 342-0318 Rev. B Page 5 of 36

 Multiviewer: The ProductionVIEW HD-SDI MV multiviewer feature eliminates the need for individual preview

monitors. The multiviewer output allows the operator to see all live video feeds displayed on a single monitor.

 Multi-View Panel Layout Options: This feature allows the user to choose from four, five or six input windows

on the multiviewer screen image and also provides two larger preview and program windows with red and

green tally window borders, which indicate the current output selections. The Multi-View feature maximizes

the potential screen size available for previewing live feeds and prevents unused blank multiviewer input

windows from being seen.

 Camera Video Thumbnail Presets: Each camera input can store up to 12 stored “video thumbnails” of

preset PTZ camera preset positions for 72 total presets. The Vaddio TeleTouch Touch Screen Controller

provides the ability to switch to any one of the 12 stored “video thumbnails” with the touch of a finger.

 Video Switcher: The internal video switcher can be configured as a traditional video switcher, using the

TAKE button, or DUAL BUS mode (essentially two 6 x 1 video switchers).

 Single or Dual Bus Multiviewer Output Mode: Single or Dual Bus Multiviewer Output allows separate

Preview and Multiviewer Video Outputs to be displayed in either Single Bus or Dual Bus mode. The Preview

and Multiviewer Video Output Menus are used to select and set the Preview or Multiviewer video output

resolutions. The Preview DVI-D Output can be set to a selected discrete output resolution and the YPbPr

Output can be set to a selected discrete output resolution.

 Anything In, Anything Out: The inputs auto-detect the video resolution and the outputs have user

configurable discrete video resolution settings. See the specifications on page 27 for additional information

on all of the resolutions supported.

 Graphic Insertion: Graphics may be inserted as “lower-thirds” using the Lower Screen Graphics (LSG)

feature. LSG can be set up to cover the bottom

¼, ⅓, ½ or full screen, with 10 adjustable steps of

transparency levels between the graphic and the video image behind it.

 Graphic Templates: A variety of graphic templates are included on a DVD supplied with the

ProductionVIEW HD-SDI MV in both Keynote and PowerPoint, to help guide users in creating professional

Lower Screen Graphics quickly and easily.

 3-Axis, 1-Button, Hall Effect Joystick: The ProductionVIEW HD-SDI MV includes a 3-Axis Hall Effect

joystick controller to smoothly operate up to six (6) PTZ cameras directly (without daisy chaining). Vaddio,

Sony®, Canon® and Panasonic® PTZ cameras are compatible with ProductionVIEW HD-SDI MV (see the list

below of specific models).

 Transitions: On the control surface, buttons for the type of effect; (dissolve, wipe or cut) as well as wipe

patterns are selectable. The transition time is adjustable through a knob on the console, from zero (0.1) to

four (4) seconds.

 Automatic Mode: The ProductionVIEW HD-SDI MV console is equipped with an automatic camera

switching mode (for compatible PTZ cameras on inputs 1 & 2), and when combined with Vaddio’s

StepVIEW™ Mats, MicVIEW™, PresenterPOD™ or other trigger devices, allows ProductionVIEW HD-SDI

MV to be set up for use without an operator present.

 Tally Outputs/External Triggers: The ProductionVIEW HD-SDI MV can be configured for six Program tally

outputs and six Preview tally outputs for controlling tally lights on external sources. It can also be configured

for up to twelve external trigger inputs.

 Additional Features: Other features include auto/manual focus, auto/manual iris, backlight compensation

and automatic white balance for compatible PTZ cameras.

ProductionVIEW HD-SDI MV

ProductionVIEW HD-SDI MV Manual - Document Number 342-0318 Rev. B Page 6 of 36

 Camera Auto-Sensing: The ProductionVIEW HD-SDI MV is capable of auto-sensing each PTZ camera

attached. Control codes for the following cameras are built-in:

 Vaddio ClearVIEW™ HD-Series PTZ Cameras (Optional HD-SDI/SDI Card available for ClearVIEW Cameras)

 Vaddio WallVIEW™, CCU and PRO Series Cameras (Optional HD-SDI/SDI Card available for WallVIEW Cameras)

 Vaddio CeilingVIEW™ HD HideAway

 Vaddio HideAway Series Cameras

 Vaddio CeilingVIEW Document Cameras

 Vaddio Model Series and PTZ Cam Series Cameras

 Sony EVI and Sony BRC Series (Optional HD-SDI/SDI Card available for BRC Cameras)

 Panasonic AW-HE100 (Optional HD-SDI/SDI Card available)

 Canon BU Series Cameras



 Video Transitions:

Video transitions are seamless with exceptional video quality. Transition time is adjustable from zero (0) to

four (4) seconds and include:

 Cross Fades (one image fades into another)

 Wipes (9 different patterns)

 Straight Cuts

 Fade To Black (by pressing and holding the MIX/FTB button)

Important Note: When using the multiviewer output, the transitions (Cross Fades, Wipes,

Straight Cuts, LSG, PIP and Fade to Black) are not visible. The multiviewer gives a

representation of the Program bus, but without transitions. Please use a separate Program

monitor to view the actual Program feed with the visible transition.

Intended Use:

Before operating the device, please read the entire manual thoroughly. The system was designed, built and

tested for use indoors, and with the provided power supply and cabling. The use of a power supply other than the

one provided or outdoor operation has not been tested and could damage the device and/or create a potentially

unsafe operating condition.

Save These Instructions:

The information contained in this manual will help you install and operate your product. If these instructions are

misplaced, Vaddio keeps copies of Specifications, Installation and User Guides and most pertinent product

drawings for the Vaddio product line on the Vaddio website. These documents can be downloaded from

www.vaddio.com free of charge.

Important Safeguards:

Read and understand all instructions before using. Do not operate any device if it has been dropped or damaged.

In this case, a Vaddio technician must examine the product before operating. To reduce the risk of electric shock,

do not immerse in water or other liquids and avoid extremely humid conditions.

Use only the power supply provided with the system. Use of any unauthorized

power supply will void any and all warranties.

Please do not use “pass-thru” type RJ-45 connectors. These pass-thru type connectors do not

work well for professional installations and can be the cause of intermittent connections which

can result in the RS-232 control line failing and locking up, and/or compromising the HSDS™

signals. For best results please use standard RJ-45 connectors and test all cables for proper

in-outs

rior to use and connection to Vaddio

roduct.

ProductionVIEW HD-SDI MV

ProductionVIEW HD-SDI MV Manual - Document Number 342-0318 Rev. B Page 7 of 36

UNPACKING:

Carefully remove the device and all of the parts from the packaging.

For 999-5655-000, the North American version, unpack and identify the following parts:

 One (1) ProductionVIEW HD-SDI MV Camera Control Console

 One (1) Vaddio PowerRite™ 18 VDC, 2.75 A Switching Power Supply

 One (1) AC Power Cable

 One (1) HDMI to DVI-D Adapter Cable 10ft. (3m)

 One (1) DVD ROM with templates and sample graphics for Lower Screen Graphics*

 Documentation

For 999-5655-001, the International version, unpack and identify the following parts:

 One (1) ProductionVIEW HD-SDI MV Camera Control Console

 One (1) Vaddio PowerRite 18 VDC, 2.75 A Switching Power Supply

 One (1) Euro Power Cable

 One (1) UK Power Cable

 One (1) HDMI to DVI-D Adapter Cable 10ft. (3m)

 One (1) DVD ROM with templates and sample graphics for Lower Screen Graphics*

 Documentation

Notes:

*User must supply their own compatible version of Keynote or PowerPoint to display and modify templates on the DVD ROM.

ProductionVIEW HD-SDI MV

ProductionVIEW HD-SDI MV Manual - Document Number 342-0318 Rev. B Page 8 of 36

ProductionVIEW HD-SDI MV with Feature Call-outs:

1. Focus and Iris Controls: Focus and Iris can be adjusted from knobs on the console for real-time control of

these critical functions when in manual mode. Auto White Balance (AWB) and Backlight Compensation

(BLC) functions are available for compatible cameras.

2. Single Bus or Dual Bus Switching: ProductionVIEW HD-SDI MV can be configured as Program and

Preview buses or as discrete video outputs (i.e. one for high resolution IMAG and the other for delivery to a

recording or streaming device).

3. Lower Screen Graphics: Insert “lower third” and other graphics, through our unique LSG function. A variety

of sizes and transparency levels are available through buttons on the console.

4. Picture-In-Picture: Insert video in any quadrant of the program video output to add impact to your live

production. The PIP can be adjusted to three different sizes.

5. Wipe, Fade, Cut, Transition Speed and Fade to Black: Select from a variety of wipe patterns, mix or cut

from buttons on the control console. The fade to black (FTB) feature allows the Program output to fade to

black. Transition Speed allows a wipe or crossfade (mix) to be adjusted up to 4 seconds in duration.

6. Take Button: Pressing the Take button switches the input selected from Preview to Program in single bus

mode. In dual bus mode, it switches the input to the input that is flashing.

7. 3-Axis Hall Effect Joystick PTZ Camera and Speed Controls: Sony, Canon and Vaddio PTZ cameras can

be controlled via the 3-axis Hall-Effect Joystick built into ProductionVIEW HD-SDI MV. When the button on

top of the joystick is pressed, it will reposition the selected camera to its home position. Located above the

joystick, adjustable knobs for Pan, Tilt and Zoom speeds allow the operator extremely fine real-time camera

control.

8. Camera Selector and Presets: Select a camera from the top row of buttons, and program (or recall) up to

12 preset shots per camera, using the camera preset control buttons.

9. 8-Line LCD Screen (for Menus and Status): The internal menu allows the user to configure the resolution

on the outputs, as well as other parameters built into the console. The LCD screen will also provide status to

current settings. See pages 20 to 24 for the menu structures and programmable functions.

10. Manual and Automatic Modes: In addition to a manual or “operator” mode there is an automatic camera

switching mode for PTZ camera presets assigned to Vaddio input triggers like the StepVIEW™ mats,

AutoVIEW™ IR or PresenterPOD.

②

①

③ ④

⑤

⑥ ⑦

⑧

⑨

⑩

ProductionVIEW HD-SDI MV

ProductionVIEW HD-SDI MV Manual - Document Number 342-0318 Rev. B Page 9 of 36

ProductionVIEW HD-SDI MV, Rear View with Feature Call-outs:

1. Power Input: Use only the 18 VDC, 2.78 A power supply provided with the ProductionVIEW HD-SDI MV.

2. External Reference Input on HD/SD-SDI connector: For connecting “house sync” to Program outputs

when connecting ProductionVIEW HD-SDI MV to another switcher/mixer. Because the ProductionVIEW HD-

SDI MV is a seamless switcher, none of the inputs have to be in sync, only the outputs. Note: If the External

Sync option is used, the Program outputs must be configured for the same resolution (i.e. 1080i/59.94,

720p/59.94, etc.).

3. HD/SD-SDI Inputs 1-5: Each input will accept either an SD-SDI or HD-SDI video signals (selectable via

internal menu) on the BNC connector. See the Video Resolutions table on page 27 for all signals and

resolutions supported.

4. Video Input 6: Input 6 is a DVI-I Input (DVI-D and DVI-A). Note: Input 6 does not support HDCP (High-

Bandwidth Digital Content Protection). Certain device content (ie: movies with copy protection) may not be

able to be displayed or passed through this input. See page 27 for supported resolutions.

5. Preview or Multiviewer Outputs: The HD-SDI Preview output delivers SD-SDI or HD-SDI video signals

(selectable via internal menu) on the BNC connector. The two-HDMI connectors output in YCbCr color space

depending on the resolution chosen in the menu. When using the optional Vaddio TeleTouch Touch Screen

Controller, a HDMI to DVI-D Adapter Cable (included) is used to connect to the Vaddio TeleTouch Touch

Screen Controller. Set the output to 1080p/60 HZ or 1080p/50. Both Preview/Multiviewer connectors will be

the same resolution. See page 27 for supported resolutions.

6. Program Outputs: The HD-SDI output connector delivers SD-SDI or HD-SDI video signals (selectable via

internal menu) on the BNC connector. The HDMI connector outputs in YCbCr color space depending on the

resolution chosen in the menu. See page 27 for supported resolutions.

Note: Transitions and effects will only appear on the Program output.

7. Tally Outputs/External Triggers: Allows for connecting ProductionVIEW HD-SDI MV to up to six Program

external Tally outputs and up to six Preview Tally Outputs when in Manual Mode. Pressing the “Auto” Control

Mode button on activates External Input Triggers such as Vaddio AutoVIEW IR, StepVIEW, TouchVIEW or

MicVIEW triggering devices. ProductionVIEW HD-SDI MV recalls the Camera Switching and Camera Presets

automatically as the triggers are received. In this mode, an operator is not required.

8. Control Port: DB-9 for RS-232 control of internal functions (Pin 2 = TX, Pin 3 = RX, Pin 5 = GND).

9. Camera Control Ports on RJ-45 connectors: One camera control port per camera (no daisy-chaining

required). Compatible with Sony, Canon, Panasonic and Vaddio PTZ cameras. See page 6 for details on

cameras and camera systems compatible with ProductionVIEW HD-SDI MV.

①

③

④

⑥

⑦

②

⑤

⑧

⑨

18VDC

ProductionVIEW HD-SDI MV

ProductionVIEW HD-SDI MV Manual - Document Number 342-0318 Rev. B Page 10 of 36

First Time Set-up with the ProductionVIEW HD-SDI MV:

ProductionVIEW HD-SDI MV is designed to be exceptionally easy to use and operate right out of the box. All of

the Vaddio standards for using video, power and control over Cat. 5 cabling are well documented and are in the

manual and available free of charge from the Vaddio website.

Getting Started:

Connect all of the cameras, monitors and peripheral devices to ProductionVIEW HD-SDI MV. The back panel

has five-BNC connectors and one-DVI-I connector.

Once you have connected all of your inputs, outputs and the PowerRite power supply, plug the AC cord into an

outlet. ProductionVIEW HD-SDI MV will boot up and scan for cameras. As ProductionVIEW HD-SDI MV boots

up, it will automatically scan each input to confirm which ports have compatible PTZ cameras connected. After

boot up, a menu will appear on the blue LCD screen.

Configuring Output Resolutions:

On the LCD screen, a chevron (>) will be

displayed next to the menu item that is currently

selected. Press the arrow down button (↓)

adjacent to the LCD screen, until the chevron is

next to “VIDEO OUTPUT MENU” and then press

the SELECT Button. Select PROGRAM OUTPUT,

which will display your options for video output

resolution for the PROGRAM OUTPUT.

Press the arrow down button to the appropriate resolution that is compatible with your video monitor and press the

SELECT Button. Press the CANCEL Button to exit out to the previous menu.

Repeat the process for your Preview Output. Once you have selected the Program and Preview output

resolutions, press the CANCEL Button to get back to the Main Menu. For additional information on the menu

structure, see pages 20 to 24 for additional information.

To set up the Preview out to be a multiviewer output, go to menu item “MULTIVIEWER” and select “ON”. If you

are using the optional Vaddio TeleTouch touch screen controller, go to “System Menu” and go to menu item

“TOUCH SCREEN”. Select either the 22” or the 18.5” monitor, which sets the correct touch screen coordinates.

Use 1080p/60 Hz or 1080p/50 Hz output resolution for the multiviewer and TeleTouch Monitor.

Auto Configured Input Resolutions:

 The ProductionVIEW HD-SDI MV automatically configures and matches the input resolution for each camera

video output connected (with active video output) to an Input Port.

 For Inputs 1 through 5, it will scan and select from 1080p/60 Hz (1920x1080) to 525i/29.97 NTSC and PAL

625i/25. Input 6 (DVI-I Port) will scan and select from 1080p/60 to 640x480@60 Hz.

Additional Programming: Review the ProductionVIEW HD-SDI Menu Structure for additional information on

programming specific parameters. For API and Programming Language, see information in the Appendix.

ProductionVIEW HD-SDI MV

ProductionVIEW HD-SDI MV Manual - Document Number 342-0318 Rev. B Page 11 of 36

Basic System Configuration:

ProductionVIEW HD-SDI MV connected to one (1) Vaddio Quick-Connect™ HD-20 CCU System, TeleTouch 22”

Touch Screen Controller and room projector. The TeleTouch Touch Screen Controller eliminates the need for

individual preview monitors and the touch screen greatly simplifies overall console operation. The TeleTouch

Touch Screen can be configured to display up to six input windows and two larger Program bus and Preview bus

windows with red and green tally window borders. It also displays video thumbnails for up to 12 camera presets

per camera input.

ProductionVIEW HD-SDI MV connected to HD-20 PTZ Camera with EZIM HD-SDI Slot Card, Quick-Connect

CCU HD-20 and TeleTouch 22” Touch Screen Controller:

HD-SDI/SDI Cable Distances:

Using the ProductionVIEW HD-SDI MV Console and the EZIM HD-SDI Slot Card for the HD-30, HD22, HD-20,

HD-19 and HD-18, expected HD-SDI/SDI cable distances are approximately as follows:

Resolutions: SMPTE STD Cable Distances*

720p/59.94/50 SMPTE 292M Max. Length: 754.543 ft. (230m)

1080i/59.94/50 SMPTE 292M Max. Length: 754.543 ft. (230m)

1080p/59.94/50 SMPTE 424M Max. Length: 459.287 ft. (140m)

1080p/59.94/60/50 - 3Gb/s compliant - Single Link Only

525i/29.97 SMPTE 259M Max. Length: 820.179 ft. (250m)

625i/25 SMPTE 259M Max. Length: 820.179 ft. (250m)

IMPORTANT NOTE: *Distances are approximate and based on using Belden 1694A coax cable,

Gennum 3Gb/s Transmitters and cable drivers with Gennum 3Gb/s Cable EQ and Receivers

(Vaddio products only). Results will vary by -40% to -50% if a non-Vaddio camera is used.

HD-SDI

Coax Cable

Power and Control

Cat-5e up to 500’

(152.4m)

RS-232

HD-SDI

DVI-D to

HDMI

Cable

Quick-Connect

CCU HD-20

TeleTouch 22” Touch Screen Controller

3-LCD Projector

ProductionVIEW HD-SDI MV

Power

Vaddio HD-20 camera with

optional EZIM HD-SDI Slot Card

HD Video

Quick-Connect CCU provides Power and

Color Correction/Shading to the HD-20

HD-SDI PROGRAM

(Feed to Satellite Truck)

Tally

ProductionVIEW HD-SDI MV

ProductionVIEW HD-SDI MV Manual - Document Number 342-0318 Rev. B Page 12 of 36

ProductionVIEW HD-SDI MV connected to four-HD-20 PTZ Cameras with EZIM HD-SDI Slot Cards, a

TeleTouch 22” Touch Screen Controller, a standard LCD Monitor and a standard HD-SDI Monitor:

HD-SDI

RS-232

HD-SDI Program

Out

Vaddio TeleTouch 22”

Touch Screen Controlle

ProductionVIEW

HD-SDI MV

Four (4) Vaddio HD-20 Cameras with

optional EZIM HD-SDI Slot Cards

HDMI Program

Out

RS-232

HD-SDI

HDMI

Output 2

HDMI

Output 1

HD-SDI

Output

Note: LCD Monitor displays the

HDMI Multiview Preview image

RS-232 RS-232 RS-232

Note: LCD Monitor displays the HD-

SDI Multiview Preview image

HD-SDI HD-SDI HD-SDI

HDMI to

DVI-D

Cable

Note: LCD Monitor displays the

HD-SDI Preview image

Note: LCD Monitor displays the

HDMI Multiviewer Preview

Vaddio TeleTouch 22”

Touch Screen Controlle

HDMI to DVI-D

Cable

HDMI

HD-SDI

RS-232

ProductionVIEW HD-SDI MV with Single or Dual Bus Multiviewer Output

Single or Dual Bus

Multiviewer Output

Single or Dual Bus Output

mode allows separate

Preview and Multiviewer

Video Outputs to be

displayed.

The Preview and Multiviewer

Video Output Menus are

used to select and set the

Preview or Multiviewer video

output resolutions.

The Preview HD-SDI Output

can be set to a selected

discrete output resolution

and the HDMI Outputs can

be set to a selected discrete

output resolution.

Helicopter not included

ProductionVIEW HD-SDI MV

ProductionVIEW HD-SDI MV Manual - Document Number 342-0318 Rev. B Page 13 of 36

Operating the ProductionVIEW HD-SDI MV:

Most of the console functions and controls are easy and intuitive. Over the next few pages there are details on

how the different functions operate.

Camera Controls:

The controls that can be used to adjust a PTZ

camera are highlighted in the diagram to the right

(mechanical functions are in gray, and electronic

in blue). See notes below for additional

information.

ProductionVIEW HD-SDI MV is shipped with

“Select Follow Preview” as the default setting. In

this configuration, the camera that is selected on

the Preview bus will automatically choose the

appropriate Camera Select button in the upper

right corner. In this example, Input 1 is a PTZ

camera on the Preview bus and the Camera

Select is illuminated on Input 1 (“1” with a circle

around the number).

3-Axis Hall Effect Joystick: Within the menus, the 3-axis joystick is programmable for pan, tilt and zoom

direction control. The zoom-in/zoom-out, tilt-up/tilt-down and pan-left/pan-right commands can be inverted on all

3-axis to customize control of the PTZ cameras attached to ProductionVIEW HD-SDI MV. Pan, tilt and zoom

speeds can be adjusted on controls above the joystick. The PTZ speeds are set on a per camera basis. The top

button on the joystick will return the camera to its HOME position.

Preset Location Storage Options: This feature allows the user to store 12 camera presets in the

ProductionVIEW HD-SDI MV or have the option of storing 6 camera presets (1 through 6) in the camera and 6

presets (7 through 12) in the ProductionVIEW HD MV. When storing the presets in the camera, the user is

allowed to speed switch camera presets. Please see the ProductionVIEW HD-SDI MV Menu Structure, System

Menu for access to the Preset location parameter.

Setting the Camera Presets: To program a PTZ camera preset, press and hold the Camera Select button for

three (3) seconds. The Camera Preset button (1 thru 12) will begin to flash. Move the camera to the desired PTZ

position, and select one of the Camera Presets buttons to store the position. Repeat the process for each preset

position that is required to be stored, up to 12 total positions per PTZ camera. A non-flashing preset button has a

location stored, but can be overwritten.

Select Follows Preview: When “Select Follows Preview” is activated, the camera selected for control is the

camera selected by the Preview bus selection. The operator selects the camera to be previewed, and control

(joystick and camera control) is transferred to that camera. The default position for this feature from the factory is

‘on’. Note: Select Follows Preview is disabled when the system is set for Dual Bus mode.

Focus, Iris, Auto White Balance and Backlight Compensation: When the Auto Focus or Auto Iris buttons are

turned off, the manual focus and iris knobs can be used to adjust these functions on compatible PTZ cameras that

are connected to the system. Auto White Balance (AWB) automatically adjusts the camera’s color settings based

on lighting and other factors. Backlight Compensation (BLC) opens the iris to allow objects in front of windows

and other bright backgrounds to be more visible.

NOTES:

1) Local Camera Presets (Local Mode): Local Mode contains all the camera information that has been set and saved in the

ProductionVIEW HD-SDI MV: Pan/Tilt/Zoom position including brightness, focus, backlight, zoom speed etc. There are 12

Local Presets available for each camera in this mode.

In Camera Presets (6 InCam 6 Local Mode): The 6-In Camera Presets are saved in the camera memory if applicable. Not

all cameras can store internal presets in this mode. These presets are limited primarily to the Pan/Tilt/Zoom position. The

6-Local Camera Presets include the ProductionVIEW HD-SDI MV settings.

2) The particular control saved under each camera preset is a function of the parameters available on the camera only.

3) Camera presets will not save specific settings of a Quick-Connect CCU.

4) Backlight Compensation can only be used when the Auto White Balance is turned on.

5) Auto White Balance will not operate with the Panasonic AW-HE100, as well as the WallVIEW HE100 cameras.

123456

PROGRAM

PREVIEW

123456

ProductionVIEW HD-SDI MV

PAN

SPEED

CAMERA PRESETS

CAMERA SELECT

WIPE PATTERNS

P. I. P.

POSITIONING

LOWER SCREEN GRAPHIC

MIX / FTB

TAKE

TRANSITION

SPEED

CUT

WIPE

.01 4 SEC

PIP

LSG

LOWER SCREEN

SIZE

TRANSPARENCY

LEVEL

AUTO

FOCUS

IRIS

BLC

AWB

FOCUS

AUTO

IRIS

CONTROL MODE

TILT

SPEED

ZOOM

SPEED

LSG

CONTROL MENUS

STATUS LINE

ProductionVIEW HD-SDI MV

ProductionVIEW HD-SDI MV Manual - Document Number 342-0318 Rev. B Page 14 of 36

Setting Single Bus or Dual Bus Multiviewer Mode:

 Clear Memory: Enter the Main Menu and scroll to System Menu. Enter System Menu and scroll to Clear

Memory. Enter Clear Memory and select Start. Note: Clear Memory clears the camera preset memories and

sets all parameters to default settings.

 Set Touch Screen Size: Enter System Menu and scroll to Touch Screen. Select either 22 Inch or

18.5 Inch.

 Set Program/Preview/Multiviewer Output Resolutions: Enter Main Menu and scroll to Video Output Menu.

o Set Program Output (select a resolution from the list)

o Set Preview Output (select a resolution from the mv list)

o Set Multiviewer Output (select a resolution from the list)

 Set Single Bus or Dual Bus Mode: Enter System Menu and scroll to Switching Mode. Select either Single

Bus or Dual Bus Mode

 Turn Multiviewer On: Enter Main Menu and scroll to Multiviewer. Select On.

 Rescan Video: Enter Main Menu and scroll to Rescan Video. Select Start.

Note: Resets all inputs, outputs and video processor.

 Test System: Check Multiviewer image and Touch Screen size. Test Program, Preview and Multiviewer

resolutions. If you have any problems, go back to Clear Memory and carefully go through the procedure

again.

Wipes, Cut or Mix Transitions:

To set up the switcher to transition from the

current input selected as the Program output to

another input, select a different video signal on the

Preview bus. In the example to the right, Program

is on Input 1 and Preview is on Input 3.

Select the type of effect (wipe, cut or mix) that the

switcher will use to transition from one input to the

other. Pressing the Take button will execute the

transition from one input to the other, using the

selected transition (wipe, cut or mix).

Changing Effect: To change the type of transition, Wipe, Cut or Mix, select that effect above the Take button.

Changing Transition Speed: Both the Mix and Wipe effects can be adjusted from .01 to 4 seconds, by adjusting

the Transition Speed knob, which is located above the Mix button.

Transitions in Dual Bus Mode: Both Program and Preview will allow for transitions (the same type of transition

will occur on both outputs). To select the input that will replace the current output on each bus, press the input

that will become the next signal sent to the output for either buses, or one bus. The signal that each bus will

switch to, will flash. Press the Take button, and the transition will occur from the current output to the next one on

each bus, one after the other. The other option for making a transition is to press the flashing button a second

time, which will execute the switch from the current (solid lit button) video signal, to the next video signal (flashing

button).

Fade To Black:

The Fade to Black feature allows a user to fade

the Program and Preview outputs to black, and

then fade the outputs up from black. To have

the outputs fade to black, press and hold the

MIX/FTB button for more than one second. The

outputs will start fading to black.

At the point where it is appropriate to fade up

from black, press and hold the MIX/FTB button

again, and the Preview and Program outputs will

return to their selected video inputs that were

selected prior to pressing FTB.

123456

PROGRAM

PREVIEW

123456

ProductionVIEW HD-SDI MV

PAN

SPEED

CAMERA PRESETS

CAMERA SELECT

WIPE PATTERNS

P. I. P.

POSITIONING

LOWER SCREEN GRAPHIC

MIX / FTB

TAKE

TRANSITION

SPEED

CUT

WIPE

.01 4 SEC

PIP

LSG

LOWER SCREEN

SIZE

TRANSPARENCY

LEVEL

AUTO

FOCUS

IRIS

BLC

AWB

FOCUS

AUTO

IRIS

CONTROL MODE

TILT

SPEED

ZOOM

SPEED

LSG

CONTROL MENUS

STATUS LINE

123456

PROGRAM

PREVIEW

123456

ProductionVIEW HD-SDI MV

PAN

SPEED

CAMERA PRESETS

CAMERA SELECT

WIPE PATTERNS

P. I. P.

POSITIONING

LOWER SCREEN GRAPHIC

MIX / FTB

TAKE

TRANSITION

SPEED

CUT

WIPE

.01 4 SEC

PIP

LSG

LOWER SCREEN

SIZE

TRANSPARENCY

LEVEL

AUTO

FOCUS

IRIS

BLC

AWB

FOCUS

AUTO

IRIS

CONTROL MODE

TILT

SPEED

ZOOM

SPEED

LSG

CONTROL MENUS

STATUS LINE

ProductionVIEW HD-SDI MV

ProductionVIEW HD-SDI MV Manual - Document Number 342-0318 Rev. B Page 15 of 36

FTB Speed: The speed at which the signal fades in and out can be adjusted through the internal menu of

ProductionVIEW HD-SDI MV. Speed ranges from 0.1 to 4.0 seconds (01 to 40 in the menu). See the

ProductionVIEW HD-SDI MV Menu Structure section of this manual for the location of the internal menu that

adjusts FTB timing.

Dual Mode FTB: Pressing and holding MIX/FTB in Dual Mode allows both the Preview and Program outputs to

fade to black, just as it will in Single Mode operation.

Note: FTB transition time is adjusted via the internal menu of ProductionVIEW HD-SDI MV, not from the

Transition Speed knob

Lower Screen Graphics:

Preparing to display Lower Screen Graphics on

ProductionVIEW HD-SDI MV, first select your

“background” video input (typically a live camera)

on the Program bus, and then select the input

that has the computer graphics that are to be

displayed, on the Preview bus. In the example to

the right, the background is Input 1 on Program,

and the computer is on Input 6.

To initiate the Lower Screen Graphic, press one

of the LSG buttons on either bus, and the graphic

will appear.

Transparency Level: To increase or decrease the transparency of the graphic overlay, press and hold the

Transparency Level button down. The system will toggle through the levels to allow the user to select the level

that is appropriate for the graphics.

Lower Screen Size: To increase or decrease the size of the graphic overlay, press and hold the Lower Screen

Size button. The system will toggle through the sizes (bottom ¼, ⅓, ½ or full screen), to allow the user to select

the level that is appropriate for the graphics that have been created.

Increasing/Decreasing Transparency Level and Lower Screen Size: When LSG is activated; pressing the

PIP upper left button will allow both Transparency Level and Lower Screen Size to increase when either button is

pressed. Pressing the lower left PIP button will allow the LSG controls to decrease when either button is pressed.

Note: This feature does not work in Dual Bus mode.

LSG in Dual Bus Mode: In Dual Bus Mode, where seamless switched outputs with effects and transitions can

be delivered out of both the Preview and Program outputs, select the Input on each bus that will be the

“background” image. Next, select the input that has the computer graphics that will be displayed (the second

button that is pressed on each bus will flash). Press the LSG buttons on the Program and Preview buses. The

graphics will be placed on each output seamlessly.

LSG Presets: Preset configurations for LSG can be set up utilizing the Camera Preset buttons in the upper right

of the console. Up to 12 preset configurations of lower screen size and transparency level can be programmed.

To do this, with LSG mode turned on, simply set a Lower Screen Size and Transparency Level. Next, press and

hold one of the 12 Camera Preset buttons for approximately 4 seconds. The Lower Screen Size and

Transparency Level will be stored in that preset position, much like a camera preset can be stored in the system.

Change the Transparency Level and/or Size and store the new preset in one of the other 12 Camera Preset

selector buttons. A total of 12 LSG presets can be stored in the system. The last LSG preset position displayed

will be the one recalled when LSG is turned back on. Currently, the preset positions for the LSG can only be

changed when LSG is turned on.

Note: A DVD containing sample graphics in both Keynote and PowerPoint is supplied with ProductionVIEW HD-

SDI MV. The sample graphics provide users with an easy way of getting started creating graphics for their own

live productions.

123456

PROGRAM

PREVIEW

123456

ProductionVIEW HD-SDI MV

PAN

SPEED

CAMERA PRESETS

CAMERA SELECT

WIPE PATTERNS

P. I. P.

POSITIONING

LOWER SCREEN GRAPHIC

MIX / FTB

TAKE

TRANSITION

SPEED

CUT

WIPE

.01 4 SEC

PIP

LSG

LOWER SCREEN

SIZE

TRANSPARENCY

LEVEL

AUTO

FOCUS

IRIS

BLC

AWB

FOCUS

AUTO

IRIS

CONTROL MODE

TILT

SPEED

ZOOM

SPEED

LSG

CONTROL MENUS

STATUS LINE

ProductionVIEW HD-SDI MV

ProductionVIEW HD-SDI MV Manual - Document Number 342-0318 Rev. B Page 16 of 36

PIP Display:

To set up and display a Picture-In-Picture on the

Program output, select the input that will be the

“background” on the Program bus. Select the

video input that will be the picture-in-picture, or in

the “window” on the screen. In the example to

the right, the background is Input 1 on the

Program bus and Input 3 is the window on the

Preview bus.

Next, select the corner that the PIP window will

show up in, using the P.I.P. Positioning buttons

(upper left, upper right, lower left and lower right).

In the illustration to the right, the lower left is

selected.

To display the PIP, press either of the PIP buttons, and the PIP will appear on the screen. Input 3 will now be

displayed in a window in the lower left corner of the screen.

Changing PIP Size: To change the size of the PIP (small, medium or large), press and hold the PIP Positioning

button and ProductionVIEW HD-SDI MV will toggle through the sizes.

PIP In Dual Mode: If ProductionVIEW HD-SDI MV is set up for Dual Mode (independently switched live feeds on

Preview and Program buses) select the background source. Next, select the PIP source, which will flash. Press

the PIP button for that specific bus, and the window will be displayed. Press the PIP button to remove the window

from the screen. PIP is discrete for the Program and Preview buses when the system is in Dual Mode.

Master Power, Manual and Auto Modes:

If ProductionVIEW HD-SDI MV is to be used with

an operator at the console, the Manual mode

button will need to be illuminated.

Pressing the Auto button will activate the Auto

mode, which is a configuration when

ProductionVIEW HD-SDI MV is used in

conjunction with Vaddio’s StepVIEW mats,

MicVIEW system and AutoVIEW IR sensors or

other trigger devices. These triggers allow

ProductionVIEW HD-SDI MV to automatically

switch between camera inputs and preset camera

positions. In this mode, no operator is required.

The mats and sensors can be placed in locations, such as podiums, white boards, etc. to allow the system to be

run in “Presenter” or Auto mode. No operator needs to be present when the system is set up in Auto mode.

ProductionVIEW HD-SDI MV handles camera switching and PTZ movements automatically.

Master Power Switch

 When the Master Power Switch is powered down, all of the attached cameras will be placed in standby.

Press and hold the power switch for 3 seconds to initiate power down sequence. This is a safeguard to

prevent accidental shutdown.

 When the Master Power Switch is powered up, all attached cameras will activate and select default camera

and preset information as defined in the menu. The ProductionVIEW HD-SDI MV will scan the inputs for

camera type and video signal type and auto-configure accordingly. This can take up to one minute and is

normal operation.

 Note: When the camera control ports are changed or reconfigured, the “Rescan Cameras” option in the menu

must be selected and started to rescan the cameras and reload the proper control codes. If only the video

inputs are changed, then activate the Rescan Video function in the Main Menu to reset the video input

priorities.

123456

PROGRAM

PREVIEW

123456

ProductionVIEW HD-SDI MV

PAN

SPEED

CAMERA PRESETS

CAMERA SELECT

WIPE PATTERNS

P. I. P.

POSITIONING

LOWER SCREEN GRAPHIC

MIX / FTB

TAKE

TRANSITION

SPEED

CUT

WIPE

.01 4 SEC

PIP

LSG

LOWER SCREEN

SIZE

TRANSPARENCY

LEVEL

AUTO

FOCUS

IRIS

BLC

AWB

FOCUS

AUTO

IRIS

CONTROL MODE

TILT

SPEED

ZOOM

SPEED

LSG

CONTROL MENUS

STATUS LINE

123456

PROGRAM

PREVIEW

123456

ProductionVIEW HD-SDI MV

PAN

SPEED

CAMERA PRESETS

CAMERA SELECT

WIPE PATTERNS

P. I. P.

POSITIONING

LOWER SCREEN GRAPHIC

MIX / FTB

TAKE

TRANSITION

SPEED

CUT

WIPE

.01 4 SEC

PIP

LSG

LOWER SCREEN

SIZE

TRANSPARENCY

LEVEL

AUTO

FOCUS

IRIS

BLC

AWB

FOCUS

AUTO

IRIS

CONTROL MODE

TILT

SPEED

ZOOM

SPEED

LSG

CONTROL MENUS

STATUS LINE

ProductionVIEW HD-SDI MV

ProductionVIEW HD-SDI MV Manual - Document Number 342-0318 Rev. B Page 17 of 36

Using the Multiviewer and Control modes with the Optional TeleTouch™ HD Touch Screen LCD Monitors:

Vaddio has the optional TeleTouch 22” and 18.5” Resistive Touch Technology, Full HD LCD Monitors available

for use with the ProductionVIEW™ HD MV and ProductionVIEW HD-SDI MV Multiviewer Video Consoles.

The Vaddio TeleTouch LCD touch screen monitors for the ProductionVIEW MV series consoles use 5-wire

resistive touch technology, which allows the operator to control the consoles with the simple touch of a finger,

gloved hand or stylus. The TeleTouch monitors can be configured to display up to six (6) input windows and two

(2) larger Preview and Program windows with green and red tally borders. In addition, each PTZ camera input

can store up to 12 video thumbnail preset camera shots.

Unlike retail/consumer grade monitors, the TeleTouch LCD panels are high-end, industrial quality and are

designed for durability when used in demanding control environments.

Connecting the TeleTouch Touch Screen LCD Monitors to the ProductionVIEW HD-SDI MV:

Step 1: To use the Multiviewer and TeleTouch Touch Screen Controller, connect the main RS-232 port (DB-9-F)

of the ProductionVIEW HD-SDI MV to the RS-232 port of the TeleTouch Monitor with the cable provided.

Connect the provided Vaddio HDMI to DVI-D Adapter Cable from the multiviewer output (preview HDMI

connector) to the DVI-D input of the TeleTouch Monitor.

Step 2: In the Control Menus, go to the menu item “MULTIVIEWER” and select “ON”. Then go to the System

Menu and go to the menu item “TOUCH SCREEN” and select the 22” or the 18.5” monitor, which sets up the

touch screen coordinates. To set the correct resolution for the TeleTouch, go to “System Menu” and then select

“Preview Output” Select either 1080p/60Hz (North America) or 1080P/50 Hz (International) output resolution for

the multiviewer. (see TeleTouch Touch Screen Control Panel with Multi-View Panel Layout Options on Page 4 for

more information).

TeleTouch 22” HD Touch Screen LCD Monitor with Base

(

Simulated ProductionVIEW Multiviewer Out

)

TeleTouch 18.5” Rack Mount HD Touch Screen LCD Monitor

(

Simulated ProductionVIEW Multiviewer Out

)

RS-232 Cable (Supplied with TeleTouch)

HDMI to DVI-D

Cable

(Supplied with

ProductionVIEW

HD-SDI MV)

ProductionVIEW HD-SDI MV with Built-in Multiviewer

22” TeleTouch Touch Screen LCD Monitor

(Parrot not to scale)

RS-232

Port on

DB-9-F

RS-232

Port on

DB-9-F

ProductionVIEW HD-SDI MV

ProductionVIEW HD-SDI MV Manual - Document Number 342-0318 Rev. B Page 18 of 36

Optional TeleTouch LCD Monitor

How the hardware and software work to provide a touch screen multiviewer.

Details:

1) Program video output window with red tally border.

2) Preview video output window with green tally border.

3) Video window name and output resolutions listed under Program and Preview windows.

4) Up to 6 input windows, labeled INPUT 1 through INPUT 6, with input resolutions listed. These smaller input

windows also have Program and Preview tally borders.

5) Up to 12 preset video thumbnails (still shots) allow the user to see a still image of the camera position before

calling up a preset into the input windows.

6) Standard base for the 22” monitor. The base can be removed and a 100mm x 100mm VESA mount can be

used instead of the base.

7) Standard control features with the Take button and choice of fade, cut or wipe transitions. Transitions will not

appear on the TeleTouch preview monitor. Transitions appear on the Program output only.

8) One (1) of six (6) standard video windows with blue borders (blue indicates that the window has not been

chosen for Program or Preview).

To operate the ProductionVIEW HD-SDI MV with the TeleTouch Touch Screen Monitor:

 Plug in all the sources (PTZ Cameras, Video Whiteboard, PC etc…). Try to get the sources at the same

resolution or close, as this enhances switching speed. Once the sources are plugged in and Steps 1 & 2 have

been completed (from the previous page) then move on.

 For simple switching, touch any of the six (6) standard video input widows. This touch will elevate that input

window to the larger Preview screen and both the standard input screen and Preview screen are given green

tally boarders and are cued up for the Program shot.

 Touch the larger Preview screen with the green tally border (or touch the TAKE button) to “take” the Preview

shot to the Program output. The Preview shot will move to Program and both the Program output and the

standard input window will be given red tally borders. Meanwhile, back at the ranch, the previous Program

window and standard input window will be moved to the Preview position and given the green tally boarders.

 The TAKE can be performed 2-ways; by touching the large Preview window with the green tally border or by

use of the large grey TAKE button (#7 above). Other buttons allow the operator to switch between fades,

wipes or cuts. The time for these transitions is still controlled by the console.

1080p/60 1080p/60

➁

➀

➄

➅

➇

➆

➂

➃

ProductionVIEW HD-SDI MV

ProductionVIEW HD-SDI MV Manual - Document Number 342-0318 Rev. B Page 19 of 36

How to Create Presets and Video Thumbnails:

 To set up still video thumbnails of preset camera positions, touch and

hold a standard video input window with a PTZ camera, for our example

input window #2. The size of the widow will reduce to about ¼ its size

(same size as the video thumbnail) and is ready to be positioned. With

the ProductionVIEW HD-SDI MV’s joystick, position the camera where it

can be easily recalled for later use. These areas will be lectern

positions, whiteboard areas, podium areas, choir areas, center aisle for

entrances, close ups and distant shots and anywhere in between. The

presets will be still shots of those areas.

 After the camera 2 is positioned, touch one of 12 video thumbnails below

to store the still shot of that position. Move the camera again and touch

a second thumbnail window and so on. Do this for every PTZ camera

that you desire presets for future recall.

 To exit, touch (and don’t hold) a video input window.

General Specifications

Optional TeleTouch™ HD Touch Screen LCD Monitors

Feature TeleTouch 22” TeleTouch 18.5”

Part Numbers 999-5520-022 (Worldwide) 999-5520-185 (Worldwide)

LCD Panel 22” TFT Color LCD 18.5” TFT Color LCD

Touch Screen Type 5-Wire Resistive Touch 5-Wire Resistive Touch

Control Interface RS-232 (DB-9F) RS-232 (DB-9F)

Resolutions for

ProductionVIEW HD-

SDI MV (Optimized)

1080/60p & 1080/50p 1080/60p & 1080/50p

Video Format DVI-D DVI-D

Aspect Ratio 16:10 16:9

Brightness 300 nit (cd/m

) 300 nit (cd/m

)

Contrast Ratio 1000:1 1000:1

Pixel Pitch 0.282mm 0.3mm

Display Colors 16.7 Million 16.7 Million

Viewing Angle 170° (H) x 160° (V) 170° (H) x 160° (V)

Power Supply 12VDC, 5.0A

with NA, Euro and UK Power Cord Set

12VDC, 5.0A

with NA, Euro and UK Power Cords

Mounting Standard Base or 100mm x 100mm

VESA Hole Pattern

7-RU Metal Rack Mount

Monitor Enclosure

Dimensions

(W x H x D)

20.1” (510.5mm) W x 13.3” (387.82) H

x 2.4” (60.1mm) D

19” (482.6mm) W x 12.2” (309.9mm) H

x 2.1” (53.3mm) D

Weight 13.4 lbs (607813 kg) 11.0 lbs (4.98951 kg)

Supplied Cables DVI and RS-232 (DB-9 M to F) DVI and RS-232 (DB-9 M to F)

12 Video Thumbnails

(stills) used for PTZ

Camera Presets

ProductionVIEW HD-SDI MV

ProductionVIEW HD-SDI MV Manual - Document Number 342-0318 Rev. B Page 20 of 36

ProductionVIEW HD-SDI MV Menu Structure

The ProductionVIEW HD-SDI MV has an 8-line LCD that displays the system menus. The menus are traversed with the

up/down arrows, select and cancel buttons. The menu structure is as follows:

Screen ProductionVIEW HD-SDI MV

V01.00.XX (software version)

Main Menu

Rescan Cameras

Rescan Video

Video Output Menu

DVI Input Mode

SD Video Format

Default Camera

Default Preset

Default Idle Return

Pan Dir Menu

Tilt Dir Menu

Zoom Dir Menu

Preset Pan Speed

Preset Tilt Speed

Preset Zoom Speed

Triggers/Tally

Select Follow Prv

Canon Shot Time

Canon ND Filter

Canon Shutter Speed

Multiviewer

Cam Search Menu

CCU Mode Menu

System Menu

Rescan Cameras

>Select (Note: Rescans all RS-232 ports for camera inputs)

>Start

Rescan Video

>Select (Note: Resets all inputs, outputs and video processor)

>Start

Video Output Menu

>Select

>Video Output Menu

>Program Output

HD 1080p/59.94Hz

HD 1080p/50Hz

HD 1080i/59.94Hz

HD 1080i/50Hz

HD 720p/59.94Hz

HD 720p/50Hz

SD 480i/29.97Hz

SD 576i/25Hz

HD 1080p/60Hz

HD 1080p/30Hz

HD 1080p/25Hz

HD 720p/30Hz

HD 720p/25Hz

>Preview Output Note: The two-HDMI Outputs will always have identical outputs and cannot

be individually programmed.

HD 1080i/59.94Hz

HD 1080i/50Hz

HD 720p/59.94Hz

HD 720p/50 Hz

SD 480i /29.97Hz

SD 576i/25 Hz

MV 1080p/59.94Hz*

MV 1080p/50Hz*

MV 1080i/ 59.94Hz

MV 1080i/50Hz

HD 1080p/60Hz

HD 1080p/30 Hz

HD 1080p/25 Hz

HD 720p/30 Hz

HD 720p/25 Hz

HD 1080p/59.94 Hz

HD 1080p/50 Hz

Menu Section

*MV NOTE:

MV settings for the multiviewer bypass the video

processing engine. For best results, use the MV

1080p/59.94/50Hz for the multiviewer output for

fully adaptive deinterlacing, adaptive 3D noise

reduction, mosquito noise reduction, block

artifact reduction, adaptive detail enhancement

featuring sharpness and texture enhancement

with overshoot control, and adaptive contrast

enhancement.

Page is loading ...

VADDIO PRODUCTIONView HD-SDI MV Installation and User Manual

Brand: VADDIO

Model: PRODUCTIONView HD-SDI MV

Category: Video converters

Type: Installation and User Manual

Download PDF

report

VADDIO PRODUCTIONView HD-SDI MV Installation and User Manual

VADDIO PRODUCTIONView HD-SDI MV Installation and User Manual

Related papers

Other documents