Samsung AQV09TWSNXSA User guide

Type
User guide
Smart A/C application
Air Conditioner
user manual
imagine the possibilities
EN
DB68-03133A-5
RAC APP_IB_E_03133A(3).indd 29 2012-08-24 오전 11:16:01
2
Features of SMART Air conditioner Network
Convenient control with Smart A/C application of a smart phone!
You can conveniently control your air conditioner anywhere with Smart A/C application.
Contents
Installing network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Checking before using a wireless router . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Connecting network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Connecting the wireless IP router with an air conditioner. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Checking Wi-Fi module installation
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Disassembling the Wi-Fi module
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Assembling the Wi-Fi module
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Checking the connection status on the Wi-Fi module
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Checking the connection status on the panel-display
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Checking network
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Connecting the wireless router with an air conditioner by the network (Select one of the 2 methods)
. . . . . . . . . . . . . . . . . . . . . .7
Connecting network with a Smart phone APP
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Setting application on Samsung smart phone (Android based smart phone)
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Setting application on iPhone
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Connecting network with WPS setting
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Registering service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Registering an air conditioner. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Operating Smart A/C application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Home screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Accessing In-home
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Controlling an air conditioner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Setting additional functions of the air conditioner
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Setting timer function
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Setting air conditioner information
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Accessing Out-of-home
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Trouble shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Open Source Announcement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
RAC APP_IB_E_03133A(3).indd 2 2012-08-24 오전 11:15:54
3
Installing network
[Connecting Network]
Connect the wireless IP router to an air conditioner.
[Registering service]
Access the
http: //global.samsungsmartappliance.com
and register the service.
Checking before using a wireless router
This Wi-Fi Aircon support only below three encryption.
- Open (No encryption), WPA/TKIP, WPA2/AES
For Wi-Fi Aircon installation, select indoor unit location near to wireless router. In case Wi-Fi signal strength is weakened,
Smart App. may be disconnected depending on the Wi-Fi signal strength.
Smart-Phone should be in the Wi-Fi signal zone to use Smart App.
For Mobile broadband internet access, Smart App. can be used when Mobile Broadband Dongle is activated to use Wi-Fi.
This product supports only DHCP(Dynamic Host Configuration Protocol ). If users use an existing wireless router, the
DHCP server option function should be activated.
Select a channel for the wireless router that is not currently being used.
If a wireless router is connected by other than the above modes, the router may not be connected with the air
conditioner or may not work. To use 802.11n, using WPA2/AES is recommended.
The quality of wireless network connection can be aected by the surrounding wireless environment.
If an internet service provider has permanently registered the users PC or MAC address (a unique identifying number),
the air conditioner might not be connected to internet. When appliances other than a PC are to be connected to Internet,
ask your ISP (Internet service provider) about the procedures required to connect to the internet.
If your internet service provider requires an ID or a password to connect to the internet, your air conditioner may not be
able to connect to the internet. If this is the case, you must enter your ID or password when connecting to the internet.
The internet connection may fail because of a firewall problem. If this is the case, contact your internet service provider.
If you cannot connect to the internet even after you have followed the procedures of your internet service provider,
please contact a samsung service center.
Connecting network
Connecting the wireless IP router with an air conditioner
For wireless router installation, refer to the user manual of the
corresponding router.
Samsung smart air conditioner supports the communication
protocols of IEEE802.11 b/g/n(2.4Ghz).
For wireless router installation, refer to the user manual of each
manufacturing company.
Samsung does not provide customers with the wireless router
manual.
Uncertified router may not be able to connect with an air
conditioner.
Certified router has the logo of below on the package or user
manual.
Wall LAN terminal
LAN cable
Wireless router
(The router that supports DHCP server.)
RAC APP_IB_E_03133A(3).indd 3 2012-08-24 오전 11:15:54
4
Connecting network
Checking Wi-Fi module installation
1
2
Open the front cover and check the Wi-Fi Module () attached on the front cover. The connection status between the
Wi-Fi module and the wireless router can be checked by the Wi-Fi module described next page.
The Panel-Display Wi-Fi LED is ON when the Wi-Fi module is connected to AP & Internet.
To replace the Wi-Fi module(Assembling or disassembling), follow the procedure below.
• When changing the Wi-Fi module, you should check the MAC attached on the module or bottom part of the indoor
unit and modify the device information at ‘Registering service.
Disassembling the Wi-Fi module
1. Remove the screw.
2. Disassemble the terminal block and remove the cable from the hook.
3. Push the Wi-Fi kit to the left to disassemble it from the terminal block.
NOTE
RAC APP_IB_E_03133A(3).indd 4 2012-08-24 오전 11:15:55
5
Assembling the Wi-Fi module
1. Assemble the Wi-Fi module andx the cable on the hook.
2. Assemble the terminal block.
3. Tighten the screw.
Checking the connection status on the Wi-Fi module
<Front view> <Bottom view>
LED ON : Connected with AP & INTERNET
LED Blinking (Interval of 0.5s) : Connected with AP but not connected with INTERNET
LED Blinking (Interval of 3s) : Not connected with AP
LED OFF : Not connected with Air Conditioner
Checking the connection status on the panel-display
Wi-Fi display description
1) Wi-Fi Indicator LED OFF :
Not connected with Air Conditioner
Not connected with AP
Connected with AP but not connected with INTERNET
2) Wi-Fi Indicator LED ON :
Connected with AP & INTERNET
RAC APP_IB_E_03133A(3).indd 5 2012-08-24 오전 11:15:56
6
Connecting network
Checking network
Check whether the wireless router connects with a smart phone.
When the internet is not connected with a smart phone, the network function of the air conditioner cannot be used.
1. Search for the wireless router on the smart phone.
2. Select the wireless router you are using now on the searched wireless router list.
3. Check whether the smart phone can access the website http://global.samsungsmartappliance.com by the internet.
If you need ID and Password to use the internet at commercial building, inform the network administrator of MAC
address of your air conditioner and get the approval of internet use for the air conditioner.
If pr
ivate program installation of ISP is needed for internet use, the air conditioner cannot be connected with the
internet.
NOTE
CAUTION
RAC APP_IB_E_03133A(3).indd 6 2012-08-24 오전 11:15:56
http://global.samsungsma...
7
Connecting the wireless router with an air conditioner by the network (Select one of the 2 methods)
Connecting network with a Smart phone APP
Setting application on Samsung smart phone (Android based smart phone )
Android based smart phone users can download the Smart A/C application by searching Samsung, Smart, A/C, AC,
Air, Conditioner’ at android market or Samsung Apps.
1-1
1-2
3
2
1. After pressing the [2
nd
F] button on the remote controller, press the [Wi-Fi] button.
- message will be displayed on the front display panel of the air conditioner.
2. After operating Smart A/C application, press the [Network Setting] tab.
3. Press the [Setting Start] tab.
NOTE
RAC APP_IB_E_03133A(3).indd 7 2012-08-24 오전 11:15:56
8
Connecting network
4
5
6
4. Select the wireless router that you are using now.
- When using free wireless router, refer to the corresponding user manual for password.
5. After entering the password of selected wireless router, press the [OK] tab.
- When the password has not been set, press the [OK] tab without entering the password.
6. When 'Transfer complete' pop up comes on, press the [OK] tab.
- When the air conditioner is connected with wireless router correctly, the Wi-Fi ( ) light on the Wi-Fi module will be
on.
- After connecting the wireless router with the air conditioner and the Wi-Fi ( ) light blinks, check the internet
connection status.
7. After 2minutes, if the Wi-Fi LED of the air conditioner is still on, it means the configuration has succeeded. At this point,
you can use smart phone to control the system.
• When searching a network by pressing the [Wi-Fi] button, message will be displayed on the front display a
maximum of 5 minute.
Smart A/C application is optimized with Samsung smart phones. Supported models are; Galaxy S, Galaxy S2, Galaxy
Note, Galaxy S2 HD LTE, Galaxy Tab 7.0 and Galaxy tab 10.1 and other models can be added in the future. When the
Smart A/C application is used with other smart phones, some functions may not work.
NOTE
CAUTION
RAC APP_IB_E_03133A(3).indd 8 2012-08-24 오전 11:15:56
9
Setting application on iPhone
iPhone users can download the Smart A/C application by searching ‘Samsung, Smart, A/C, AC, Air, Conditioner’ at
Apple App store.
3
1-1
1-2
1. After pressing the [2
nd
F] button on the remote controller, press the [Wi-Fi] button.
-
message will be displayed on the front display panel of the air conditioner.
2. Select [Settings] [Wi-Fi] on your iPhone.
3. From the list of Wi-Fi, select SMARTAIRCON and enter JUNGFRAU2011 as password. (JUNGFRAU2011 should be capital
letter.)
4. After operating Samsung Smart A/C application, press the [Network Setting] tab.
NOTE
RAC APP_IB_E_03133A(3).indd 9 2012-08-24 오전 11:15:57
4
10
Connecting network
7
6
5
5. Press the [Setting Start] tab.
6. Enter the information of wireless router and press the [OK] tab.
- Required information is; SSID, Security type, Encryption type and Password.
If you do not know the information of wireless router, check its manual or contact your ISP (internet service
provider).
7. When 'Transfer complete' pop up comes on, press the [OK] tab.
8. Select [Settings] [Wi-Fi] on your iPhone.
9. Select the wireless router that you are using, and enter the password.
- When the air conditioner is connected with wireless router correctly, the Wi-Fi (
) light on the Wi-Fi module will be
on.
- After connecting the wireless router with the air conditioner and the Wi-Fi (
) light blinks, check the internet
connection status.
10. After 2 minutes, if the Wi-Fi LED of the air conditioner is still on, it means the configuration has succeeded. At this point,
you can use smart phone to control the system.
When searching a network by pressing the [Wi-Fi] button,
message will be displayed on the front display a
maximum of 5 minutes.
Supported models are; iphone4, iphone4S. and other models can be added in the future.
NOTE
NOTE
CAUTION
RAC APP_IB_E_03133A(3).indd 10 2012-08-24 오전 11:15:57
11
Connecting network with WPS setting
2
1-2
1-1
1. After pressing the [2
nd
F] button on the remote controller, press the [WPS] button.
message will be displayed on the front display panel of the air conditioner.
2. Press [WPS] button on the wireless router that will be connected to an air conditioner and operate the WPS function of
the wireless router. (The location of WPS button may be different depending on the wireless manufacturing company.)
3. After connecting the air conditioner with the wireless router correctly, the Wi-Fi ( ) light on the Wi-Fi module will be
on.
Check whether the wireless router supports Wi-Fi Protected Setup™(WPS).
Check whether the wireless router has WPS button.
Samsung smart air conditioner uses PBC method of WPS.
When searching a network by pressing [WPS] button, the remote controller will not work for a maximum of 2
minutes.
Be careful when pressing the WPS button because if you hold the WPS button for a long time, the set value of the
wireless router will be initialized with some types of wireless router.
Operating wireless router through WPS mode might be different depending on the manufacturing company.
Therefore, please refer to the user manual of your wireless router.
If the wireless router(AP) is not authenticated with WPS, connection failure might occur.
If the wireless router that is not authenticated with WPS is connected to an air conditioner, the previously
connected Wi-Fi of other units might be disconnected.
NOTE
CAUTION
RAC APP_IB_E_03133A(3).indd 11 2012-08-24 오전 11:15:58
12
Registering service
Registering an air conditioner
1. Access Samsung Smart appliance website (http://global.samsungsmartappliance.com).
2. Enter the User ID and Password to log in.
- If you dont have an account, press [Create a Samsung account] and fill in the form to become a member .
3
3. Select [My page]->[My page].
4
4. Select [Add device] .
RAC APP_IB_E_03133A(3).indd 12 2012-08-24 오전 11:15:58
13
7
5
5. After entering the MAC written on the label sticker attached on the bottom part of the air conditioner or Wi-Fi module, click
the [Certify device].
6. Restart the air conditioner you are using now.
7. When the device certification message appears, click [OK].
- If the air conditioner you are registering is already registered by other users, a window will come on asking whether you
want to delete the usage authority of the existing users, or not.
8. After the registration of the air conditioner is completed, you can check the registered air conditioner on the device
information list.
• When changing a Wi-Fi module, perform the procedure above in order from No.1.
NOTE
RAC APP_IB_E_03133A(3).indd 13 2012-08-24 오전 11:15:58
14
Operating Smart A/C application
Android based smart phone users can download the Smart A/C application by searching ‘Smart Air Conditioner at
android market(Google Play Store) or Samsung Apps.
iPhone users can download the Smart A/C application by searching Smart Air Conditioner at Apple APP store.
Home screen
In-home You can control your air conditioner at home.
Out-of-home You can control your air conditioner outside your home.
Demo Play You can test the functions of Smart A/C application.
Network Setting Set the air conditioner network.
Accessing In-home
Use Smart A/C application for the replacement of a remote controller at home.
3
1
1. Press the [In-home] tab on home screen.
2. Search for the air conditioner.
- When you cannot find the air conditioner you want to select, press the [Refresh] to search it again.
3. Select the air conditioner you want to access.
RAC APP_IB_E_03133A(3).indd 14 2012-08-24 오전 11:15:58
15
4. Before you first access your air conditioner, you should get authentication.
When authentication pop-up comes on, turn on the air conditioner within 20seconds.
After getting the authentication successfully, you can log on to the air conditioner.
Controlling an air conditioner
Check the control function of the air conditioner at AC control screen.
Mode Set the basic operation of the air conditioner.
Option Set the additional function of the air conditioner.
Timer Set the On or Off timer function of the air conditioner.
Settings Set the name of network or air conditioner.
Set the operation mode of the air conditioner by pressing the [Mode] tab.
2
3
1
4
1
Power ON/OFF Turn the air conditioner on or off.
2
Mode Select Auto, Cool, Dry, Fan, or Heat.
3
Desired temperature Select the desired temperature of the air conditioner.
4
Current temperature Display current temperature of indoor room.
RAC APP_IB_E_03133A(3).indd 15 2012-08-24 오전 11:15:59
16
Operating Smart A/C application
Setting additional functions of the air conditioner
You can control the additional functions the air conditioner supports.
The additional functions will be activated depending on the air conditioner functions.
1. Press the [Option] tab at the bottom of the screen.
2. Select the operation mode or additional functions you want.
For the details of each additional function, refer to the user manual of each air
conditioner.
Setting timer function
2
1
3
1. After pressing the [Timer] tab at the bottom of the screen, press the [On Timer] or [Off Timer] tab.
- When you want to set on time, press the [On Timer] tab or [Off Timer] tab for off time.
2. Press the [+], [-] or [AM], [PM] tab to set the on time or off time.
3. After setting repetition cycle, press the [OK] tab.
On time and off time cannot be set at the same time.
NOTE
NOTE
RAC APP_IB_E_03133A(3).indd 16 2012-08-24 오전 11:15:59
17
Setting air conditioner information
Change air conditioner information or see the App version information, Open Source License by pressing the [Settings]
tab.
Set the name of the air conditioner by pressing the [AC Info Setting] tab.
RAC APP_IB_E_03133A(3).indd 17 2012-08-24 오전 11:15:59
18
Operating Smart A/C application
Check the APP version by pressing the [Version] tab.
Accessing Out-of-home
2
1
1. Press the [Out-of-home] tab.
2. After entering the ID and Password of Samsung Smart appliance website, press the [OK] tab.
3. Control your air conditioner outside home.
- Operating the Out-of-home is the same as Accessing In-home’(refer to p12)
You need to log in to operate Out-of-home.
Enter the the ID and Password that you used to register the network service. If you haven’t joined the membership,
join the membership and register your air conditioner at http://global.samsungsmartappliance.com .
When accessing the air conditioner with Out-of-home, you cannot us
e additional functions of the air conditioner.
NOTE
RAC APP_IB_E_03133A(3).indd 18 2012-08-24 오전 11:16:00
19
Trouble shooting
Before you make a call to a service center, please check the items in the table below.
Check point Solution
Air conditioner
cannot be found
at Smart A/C
application.
Check whether the Wi-Fi of the Smart phone
is activated.
Activate the Wi-Fi connection of the Smart phone.
Check whether the Smart phone and the
air conditioner are connected to dierent
wireless routers
The Smart phone and the air conditioner should be
connected to the same wireless router.
Check whether the Wi-Fi(
) light on the
Wi-Fi module is on.
Check whether the air conditioner is correctly connected to
a wireless router.
The Smart phone is connected to the air conditioner correctly but it
does not work.
Restart the Smart A/C application or reconnect the Smart
phone with the wireless router.
When selecting In-home function of the Smart A/C application,
multiple appliances are searched.
Select the air conditioner whose device number is the same
as your air conditioner on the list.
I don’t have ID and Password to log in to Out-of-home of Smart A/C
application.
Join the membership at Samsung Smart appliance website
(http://global.samsungsmartappliance.com) and register
your air conditioner.
Out-of-home
function of Smart
A/C application does
not work.
Check whether the Wi-F
i( ) light on the
Wi-Fi module is on.
Check whether the air conditioner is connected to the
wireless router correctly.
Check whether the Wi-Fi(
) light on the
Wi-Fi module blinks at an interval of 3 sec.
Check whether the wireless router is connected to internet
correctly.
RAC APP_IB_E_03133A(3).indd 19 2012-08-24 오전 11:16:00
20
Open Source Announcement
Open Source Announcement
The software included in this product contains copyrighted
software that is licensed under the GPL/LGPL.
You may obtain the complete Corresponding Source code from
us for a period of three years after our last shipment of this
product by sending email to:
oss.request@samsung.com
If you want to obtain the complete Corresponding Source code
in the physical medium such as CD-ROM, the cost of physically
performing source distribution may be charged.
This offer is valid to anyone in receipt of this information.
The software included in this product is licensed under the GPL/
LGPL.
Therefore, you can obtain source code of GPL or LGPL software
used in this product from us by sending email to oss.request@
samsung.com .
To use OpenSSL Toolkit, the software developed by OpenSSL
Project is used in this product.
GPL Software :
Bridge-Utils, BusyBox, DNRD, dosfstools, iproute2, IPTables, Linux
Kernel, ntpclient, Open1x, RSDK toolchain, rtl819x - Bootloader,
samba, squashfs, udhcp Server-Client Package, USB-ModeSwitch,
wireless-tools
LGPL Software :
libnl-Netlink Library, Mini-XML
GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc.
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
Everyone is permitted to copy and distribute verbatim
copies of this license document, but changing it is not
allowed.
Preamble
The licenses for most software are designed to take away your
freedom to share and change it. By contrast, the GNU General
Public License is intended to guarantee your freedom to share
and change free software--to make sure the software is free for
all its users. This General Public License applies to most of the
Free Software Foundations software and to any other program
whose authors commit to using it. (Some other Free Software
Foundation software is covered by the GNU Lesser General Public
License instead.) You can apply it to your programs, too.
When we speak of free software, we are referring to freedom, not
price. Our General Public Licenses are designed to make sure that
you have the freedom to distribute copies of free software (and
charge for this service if you wish), that you receive source code
or can get it if you want it, that you can change the software or
use pieces of it in new free programs; and that you know you can
do these things.
To protect your rights, we need to make restrictions that forbid
anyone to deny you these rights or to ask you to surrender the
rights. These restrictions translate to certain responsibilities for
you if you distribute copies of the software, or if you modify it.
For example, if you distribute copies of such a program, whether
gratis or for a fee, you must give the recipients all the rights that
you have. You must make sure that they, too, receive or can get
the source code. And you must show them these terms so they
know their rights.
We protect your rights with two steps: (1) copyright the software,
and (2) offer you this license which gives you legal permission to
copy, distribute and/or modify the software.
Also, for each authors protection and ours, we want to make
certain that everyone understands that there is no warranty for
this free software. If the software is modified by someone else
and passed on, we want its recipients to know that what they
have is not the original, so that any problems introduced by
others will not reflect on the original authors’ reputations.
Finally, any free program is threatened constantly by software
patents. We wish to avoid the danger that redistributors of a free
program will individually obtain patent licenses, in effect making
the program proprietary. To prevent this, we have made it clear
that any patent must be licensed for everyone’s free use or not
licensed at all.
The precise terms and conditions for copying, distribution and
modification follow.
TERMS AND CONDITIONS FOR COPYING,
DISTRIBUTION AND MODIFICATION
0. This License applies to any program or other work which
contains a notice placed by the copyright holder saying it may
be distributed under the terms of this General Public License.
The “Program, below, refers to any such program or work, and
a “work based on the Program means either the Program or
any derivative work under copyright law: that is to say, a work
containing the Program or a portion of it, either verbatim or
with modifications and/or translated into another language.
(Hereinafter, translation is included without limitation in the
term “modi fication”.) Each licensee is addressed as “you”.
Activities other than copying, distribution and modification are
not covered by this License; they are outside its scope. The act of
running the Program is not restricted, and the output from the
Program is covered only if its contents constitute a work based
on the Program (independent of having been made by running
the Program). Whether that is true depends on what the Program
does.
1. You may copy and distribute verbatim copies of the Program’s
source code as you receive it, in any medium, provided that
you conspicuously and appropriately publish on each copy an
appropriate copyright notice and disclaimer of warranty; keep
intact all the notices that refer to this License and to the absence
of any warranty; and give any other recipients of the Program a
copy of this License along with the Program.
You may charge a fee for the physical act of transferring a
copy, and you may at your option offer warranty protection in
exchange for a fee.
RAC APP_IB_E_03133A(3).indd 20 2012-08-24 오전 11:16:00
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28

Samsung AQV09TWSNXSA User guide

Type
User guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI