Panasonic P136-139 User manual

Type
User manual
Add New Air Conditioner Units
(Wired Remote Controller).
Tap the “+” icon. Select
“Commercial air
conditioner”.
Select “Wired
Remote Controller”. Tap “Start”.
Select “Newly
purchased
air-conditioner”.
Make sure the smartphone is connected
to the same wireless network. Follow the
instructions listed on the screen.
Select your [Network status]
and make a selection according
to the display.
Choose to connect
using WPS or AP.
**AP mode can only use
with (Android 5.0 & IOS
11.0) and above.
1
STEP 2
STEP
3
STEP 4
STEP
5
STEP 6
STEP
7
STEP 8
STEP
Commercial Air Conditioners (CAC)
4.2 Add New Units to Groups
If choose WPS, refer
Step 9-11 of page 138.
If choose AP, refer
Step 9-11 of page 138.
136137
WPS
WPS
Wi-FiETHERNETINTERNETDBLPOWER
Add New Air Conditioner Units
(Wired Remote Controller) continues...
WPS
AP
WPS
AP
WPS
AP
9
STEP 10
STEP 11
STEP
9
STEP 10
STEP 11
STEP
12
STEP 13
STEP 14
STEP
15
STEP 16
STEP
Press the WPS
button on router
then tap “Next”.
Select [Network settings]
and choose [Auto] then tap
“Next” to continue.
If connection is successful the
display of the controller will show
“Connected to router”. Tap “Next”
when connected. Go to Step 12.
Select [Network Settings]
and choose “Manual”. Tap
“Next” when the text reads
“Operating in Manual”.
Tap “Join” when prompt
Comfort Cloud wants to
join Network.
If connection is successful
the display of the controller
will show “Connected to
router”. Tap “Next” when
connected. Go to Step 12.
Select the air
conditioner then
tap “Register”.
Select [Unit Registration]
then tap “Next”. Key in Password
then tap
“Register”.
Set air conditioner
name then tap
“Register”.
Air conditioner has
been registered.
Commercial Air Conditioners (CAC)
4.2 Add New Units to Groups
138139
  • Page 1 1
  • Page 2 2

Panasonic P136-139 User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI