Product Information
Applicable product:
2-hole sink K-3349-2 shown
Single-hole sink K-3349-1 shown
Fixture*:
Basin area 12″ (30.5 cm) x 9-1/2″ (24.1 cm)
Water depth 7″ (17.8 cm)
Drain hole 3-5/8″ (9.2 cm) D.
Faucet holes 1-7/16″ (3.7 cm) D.
*Approximate measurements for comparison only.
Included components:
Fastener pack 1022739
Installation Notes
Install this product according to the installation guide.
Cutout is 14-1/2″ (36.8 cm) x 14-1/2″ (36.8 cm) with
1/2″ (1.3 cm) radius corners.
Fixture conforms to ASME Standard A112.19.3/CSA B45.4. All
dimensions are nominal.
1-1/2" OD
K-3349-2
K-3349-1
4" (10.2 cm)
1/4" (6 mm)
15" (38.1 cm)
13-1/16"
(33.2 cm)
2-1/2"
(6.4 cm)
6"
(15.2 cm)
4"
(10.2 cm)
15"
(38.1 cm)
8-3/4"
(22.2 cm)
2-1/2"
(6.4 cm)
5-1/2"
(14 cm)
4"
(10.2 cm)
7-1/2"
(19.1 cm)
7-11/16"
(19.5 cm)
1-1/2"
(3.8 cm)
Roughing-In
K-3349
TOCCATA
TM
SELF-RIMMING ENTERTAINMENT SINK
TOCCATATM SELF-RIMMING ENTERTAINMENT SINK
116366-1-
BF
/
