SharkBite
Loose Key Stop Valves
The SharkBite Loose Key Stops allow the user to connect supply
lines to fixtures and appliances with the speed and convenience of
push-fit connections to the final phase of your plumbing projects.
Data Sheet
Push-to-Connect
SBPCKLSV0421
Page 1 of 2
Features and Benets
Applications
• Potable water
• Recirculation
• Radiant Heating (w/ Glycol concentration up to 100%)
Specification
The tube shall be inserted into the SharkBite PTC Fitting in the first
stage through a release collar and then through a stainless-steel
grab ring. The grab ring has teeth that open out and grip onto the
tube.
At the second stage the tube shall be pushed through an O-
ring protector which aligns the pipe. A specially formulated EPDM
O-ring shall be compressed between the wall of the fitting and the
tube before the end of the tube reaches the tube stop. Only when
the pipe has passed through the O-ring and reached the pipe stop
shall a secure joint be created. The fitting shall be a SharkBite PTC
Fitting.
#
24731LF
# 24732LF
• Sleek chrome finish for an attractive appearance.
• Quarter-turn full-port brass ball valve.
• Compatible with PEX, copper, CPVC and PE-RT pipe.
• No special tools, crimping, glue or soldering is needed.
• Can be installed in wet lines.
• Ideal for working in tight spaces.
• Remove using a Disconnect Clip or Disconnect Tongs (both
sold separately).
• Removable key included to shut off the flow of water:
• Prevents unwanted tampering.
US 1 877 700 4242 | sales@sharkbite.com | sharkbite.com
Canada 1 888 820 0120 | canadasales@rwc.com
Description
Dimensions
APart # B C D E F G H I
Performance
Materials
Specication Data
33°F
160°F
125 psi
Minimum working temperature
Maximum working temperature
Maximum working pressure
Installation Requirements
SBPCKLSV0421
Page 2 of 2
Steel
Zinc
DZR LF Brass ¹
EPDM
PTFE
DZR LF Brass ¹
DZR LF Brass ¹
ABS
Copper
DZR Brass
DZR LF Brass ¹
Screw
Key
Spindle
O-ring
Seat
Ball
Body
Cover
Olive
Cap
End Plug
Straight Stop 1/2 in. PTC X 3/8 in. OD Compression
Angle Stop 1/2 in. PTC
X 3/8
in. OD Compression
24731LF
24732LF
24733LF
24734LF
0.76
0.76
0.76
0.76
0.56
0.56
0.56
0.56
2.52
2.74
2.52
2.93
1.10
1.10
1.10
1.10
1.55
1.14
1.55
1.14
0.97
0.97
0.97
0.97
0.41
0.81
0.41
0.81
1.18
1.52
1.37
1.52
0.56
0.97
0.56
0.97
1
2
3
4
5
6
7
8
9
10
11
¹ Lead Free for all models, surfaces that are in contact with consumable water contain less
than 0.25% lead by weight.
All measurements are displayed in inches
Pipe Type
1. Turn on water supply, and
drain the line.
2. Cut pipe square or
remove existing valve and
disconnect supply line.
3. Remove burrs from inside
and outside of pipe.
4. Mark 0.95-in insertion
depth on pipe using depth
gauge tool.
5. Push valve onto pipe to
insertion depth mark.
6. Connect supply line to stop
valve and fixture.
7. Turn on water and check
connections.
8. Remove using a Disconnect
Clip or Disconnect Tongs
(both sold separately).
# 24732LF
# 24731
LF
BACK- 5.75"
FRONT - 5.75"
Straight Stop ¼ Turn
Válvula de Cierre Recta
de 1/4 Giro
1/2" x 3/8" OD
PEX • Copper/Cobre • CPVC • PE-RT
PUSH-TO-CONNECT PUSH-TO-CONNECT
T
H
E
F
T
P
R
O
T
E
C
T
E
D
ASME A112.18.1/CSA B125.1
NSF/ANSI/CAN-61
'Lead-Free' per NSF/ANSI 372 'Sin Plomb' per NSF/ANSI 372
#818124
LB9
For warranty and complete installation instructions,
please visit sharkbite.com
WARNING: This product can expose you to chemicals including lead which is known to the
State of California to cause cancer and birth defects or other reproductive harm. For more
information go to www.P65Warnings.ca.gov.
ADVERTENCIA: Este producto puede exponerle a químicos incluyendo dirigir, que es conocido
por el Estado de California como causante de cáncer y defectos de nacimiento u otros daños
reproductivos. Para mayor información, visite www.P65Warnings.ca.gov.
1. Turn o water supply, and drain the line.
2. Cut pipe square or remove existing valve and
disconnect supply line.
3. Remove burrs from inside and outside of pipe.
4. Mark 0.95-in insertion depth on pipe using depth
gauge tool.
5. Push valve onto pipe to insertion depth mark.
6. Connect supply line to stop valve and xture.
7. Turn on water and check connections.
Instrucciones de instalación:
Installation Instructions:
1. Cierre el suministro de agua y drene la tubería.
2. Corte la escuadra del tubo o quite la válvula existente
y desconecte la tubería de suministro.
3. Retire las rebabas de la parte interior y exterior de la tubería.
4. Marque la profundidad de inserción de 0.95 pulgadas en la tubería
usando la herramienta de calibración de profundidad.
5. Empuje la válvula en la tubería hasta la marca de profundidad de inserción.
6. Conecte la tubería de suministro para detener la válvula y el accesorio.
7. Abra el ujo de agua y revise las conexiones.
Distributed by
Reliance Worldwide Corporation
®
1-877-700-4242
23037LFZC
Qty. 1
6
9 7 2 8 5 5 0 3 3 1
1
1/2”
3/8”
Closed
Removable Key
Open
Tubing: Hard drawn copper pipe Type K, L and M and annealed
Type M not to exceed 3/8 nominal complying with ASTM B 88,
PEX tubing complying with ASTM F 876 or CSA B137.5, or CVPC
tubing complying with ASTM D 2846 or CSA B137.6, PE-RT
tubing complying with ASTM F2769 or CSA B137.18
Straight Stop 1/2 in. PTC X 3/8 in. PTC
Angle Stop 1/2 in. PTC X 3/8 in. PTC
US 1 877 700 4242 | sales@sharkbite.com | sharkbite.com
Canada 1 888 820 0120 | canadasales@rwc.com
Fitting Size Nominal Pipe Size
Insertion Depth
Pipe OD Insertion Depth(in)
1/4 in.
1/2 in.
1/4 in. CTS
1/2 in. CTS
3/8 in.
5/8 in.
0.82
0.95
SharkBite Universal fittings are intended to be a permanent
connection and are not designed for repeated connection and
disconnection after the initial install.
SharkBite Fitting Reuse
Codes and Standards
ASME A112.18.1
CSA B125.1-12
NSF/ANSI/CAN 61
NSF/ANSI 372
-
1
-
2
-
3
SharkBite 24731LF User manual
- Type
- User manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
SharkBite 24736LF Installation guide
-
-
-
-
-
-
-
-
-
