JTS US-8001D User manual

JTS
Brand
JTS
Model
US-8001D
Category
Microphones
Type
User manual

This manual is also suitable for

JTS US-8001D is a single-channel PLL diversity wireless system that gives you reliable wireless transmission for your audio signals. It boasts a UHF band operation, which is less prone to RF interference than the VHF band. Thanks to the PLL synthesized technology, you get 16 selectable channels to choose from, reducing the risk of interference from other wireless devices. With its true diversity reception, you can enjoy stable signal reception even in challenging environments.

The built-in adjustable squelch control allows you to minimize background noise, ensuring clear and intelligible audio. The tuned antennas enhance the stability of RF reception, contributing to the overall reliability of the system. To prevent unwanted interference, the US-8001D is equipped with both Tone Key Squelch and Noise Mute detection features.

JTS US-8001D is a single-channel PLL diversity wireless system that gives you reliable wireless transmission for your audio signals. It boasts a UHF band operation, which is less prone to RF interference than the VHF band. Thanks to the PLL synthesized technology, you get 16 selectable channels to choose from, reducing the risk of interference from other wireless devices. With its true diversity reception, you can enjoy stable signal reception even in challenging environments.

The built-in adjustable squelch control allows you to minimize background noise, ensuring clear and intelligible audio. The tuned antennas enhance the stability of RF reception, contributing to the overall reliability of the system. To prevent unwanted interference, the US-8001D is equipped with both Tone Key Squelch and Noise Mute detection features.

US-8002D
SINGLE / DUAL CHANNEL PLL DIVERSITY WIRELESS SYSTEM
US-8001D
Instruction Manual
ank you for choosing the JTS wireless system. In order to obtain the best eciency
from the system, you are recommended to read this instruction manual carefully.
TABLE CONTENTS
1. Important Cautions
2. Features
3. Specification
3-1 Overall System
3-2 Receiver
3-3 Transmier
3-4 Optional Condenser Microphone
4. Parts Identification & Accessories
4-1 Receiver
4-2 Handheld Transmier
4-3 Body-pack Transmier
4-4 Condenser Microphones
4-5 Optional Accessories
5. Preparing procedures & basic operation
5-1 Receiver
5-2 Baery Insertion of the Transmier
5-3 Rack Mounting
5-4 Installation of Condenser Microphones
6. System operation
7. Recommendations
01
01
02
02
02
03
04
06
06
08
10
10
12
13
13
14
16
17
18
20
Important Cautions
■ Always makes all connections before plugging the unit into an AC power outlet.
■ Do not leave the device in a place neither with high temperature nor high humidity.
■ Always do not handle the power cord with wet hands!
■ Keep the devices away from re and heat sources.
Features
■ Operated in UHF band where there is less RF interference than the VHF band.
■ Due to the PLL synthesized technology, the system oer 16 selectable channel.
■ e true diversity reception with 2 independent RF receivers ensure the stable transmission
and reception.
■ Adjustable squelch control can eectively reduce the noise.
■ Tuned antennas can benet the stable RF reception.
■ Built-in Tone key Squelch & Noise Mute detection are available to restrain the interference
signal.
■ Rugged metal housing can pass through the dicult environment.
■ Equipped with balanced XLR and unbalanced output allows great convenience.
■ Body-pack transmier provides phantom powering for condenser lavaliere and headset
microphones.
01 DUAL CHANNEL PLL DIVERSITY WIRELESS SYSTEM
1
2
Specification
3-1 Overall System
3-2 Receiver
600 MHz~960 MHz
PLL Synthesized Control OSC
16 Channels
50 Hz~18KHz
24 Mhz
100M
US-8001D
±0.005%
>100 dB
-107dBm (12DB S/N AD)
>60 dB
<0.6%@1 KHz
LED
RF/AF Status, Channel,
Antenna A/B
Power On/O, Volume Control,
Channel Up/Down, Squelch level
-12 dB
Pilot Tone & Noise Mute
12-18V DC, 600 mA
1 Balanced XLR socket
1 ∅6.3mm Phone Jack (2.2 KΩ)
221mm(W)*40mm(H)*152mm(D)
US-8002D
±0.005%
>100 dB
-107dBm (12DB S/N AD)
>60 dB
<0.6%@1 KHz
LED
RF/AF Status, Channel,
Antenna A/B
Power On/O, Volume Control,
Channel Up/Down, Squelch level
-12 dB
Pilot Tone & Noise Mute
12-18V DC, 600 mA
2 Balanced XLR socket
1 ∅6.3mm Phone Jack (2.2 KΩ)
221mm(W)*40mm(H)*152mm(D)
RF Frequency Range
Oscillation Type
Channels
Audio Frequency Response
Band-width
Operation Range
Receiving Mode
Frequency Stability
S/N Ratio
RF Sensitivity
Image Rejection
T.H.D. (1 KHz)
Display
Display Contents
Controls
Audio Output Level
Squelch
Operation Voltage
Output Connector
Dimension(m/m)
3
02
Model No.
Type
Ball Grille Shape
Spurious Rejection
Stability
Frequency Deviation
S/N Ratio
Current Consumption
LED Indicates
Baery
Model No.
Type
Ball Grille Shape
Spurious Rejection
Stability
Frequency Deviation
S/N Ratio
Current Consumption
LCD/LED Indicates
Baery
PT-850B / PT-850Bmi
Body-pack
<-60dBc
±10KHz
±48 KHz
>100 dB (1 KHz-A)
100 mA
Power On/O
Low ba.
UM3,AA 1,5V*2
3-3 Transmitter
Mh-850 / Mh-8016
Handheld
Flat top
<-60dBc
±10KHz
±48 KHz
>100 dB (1 KHz-A)
100 mA
Power On/O
Low ba.
UM3,AA 1,5V*2
Mh-750
Handheld
Round top
<-60dBc
±10KHz
±48 KHz
>100 dB (1 KHz-A)
100 mA
Power On/O,
Low ba.
UM3,AA 1,5V*2
03 DUAL CHANNEL PLL DIVERSITY WIRELESS SYSTEM
Model No.
Frequency Range
Polar Paern
Sensitivity @ 1 KHz
Impedance
max. SPL for 1% T.H.D.
Connector Type
Standard Accessories
Model No.
Frequency Range
Polar Paern
Sensitivity @ 1 KHz
Impedance
max. SPL for 1% T.H.D.
Connector Type
Standard Accessories
Model No.
Frequency Range
Polar Paern
Sensitivity @ 1 KHz
Impedance
max. SPL for 1% T.H.D.
Connector Type
Standard Accessories
04
3-4 Optional Condenser Microphone
Lavaliere Microphone
Headset Microphone
Instrument Microphone
Model No.
Frequency Range
Polar Paern
Sensitivity @ 1 KHz
Impedance
max. SPL for 1% T.H.D.
Connector Type
Standard Accessories
CM-501
100Hz~15,000Hz
Cardioid
-60dB±3dB
2.2k±30%
130dB
4 Pin Mini XLR
Windscreen
CX-201
60Hz~15,000Hz
Omini-directional
-60dB±3dB
2.2k±30%
130dB
4 Pin Mini XLR
Windscreen
CM-125
50Hz~18,000Hz
Omini-directional
-53dB±3dB
4.4k±30%
130dB
4 Pin Mini XLR
Windscreen
Model No.
Frequency Range
Polar Paern
Sensitivity @ 1 KHz
Impedance
max. SPL for 1% T.H.D.
Connector Type
Standard Accessories
CM-204
60Hz~15,000Hz
Omini-directional
-60dB±3dB
2.2k±30%
130dB
4 Pin Mini XLR
Windscreen
CM-204U
30Hz~18,000Hz
Cardioid
-68dB±3dB
680±30%
130dB
4 Pin Mini XLR
Windscreen
CM-225
50Hz~18,000Hz
Omini-directional
-53dB±30%
4.4k±30%
130dB
4 Pin Mini XLR
Windscreen
Model No.
Frequency Range
Polar Paern
Sensitivity @ 1 KHz
Impedance
max. SPL for 1% T.H.D.
Connector Type
Standard Accessories
CX-516W
50Hz~18,000Hz
Cardioid
-70dB±3dB
2.2k±30%
130dB
4 Pin Mini XLR
Windscreen
CX-504
30Hz~18,000Hz
Cardioid
-68dB±3dB
680±30%
130dB
4 Pin Mini XLR
Windscreen
CX-508W
50Hz~18,000Hz
Cardioid
-67dB±30%
2.2k±30%
130dB
4 Pin Mini XLR
Windscreen
05 DUAL CHANNEL PLL DIVERSITY WIRELESS SYSTEM
Ear-hook Microphone
Model No.
Frequency Response
Polar Paern
Sensitivity (at 1KHz)
Impedance
Max. SPL for 1% THD
Connector
CM-802/CM-804
60 ~ 15,000Hz
Omni-directional
-66±3 dB* (0.5mV)*0dB
=1V/μbar,1KHz
Rated impedance 2.2kΩ
130dB
4P Mini XLR
CM-815/CM-825
50 ~ 18,000Hz
Omni-directional
-53±3 dB* (2.24mV)*0dB
=1V/μbar,1KHz
Rated impedance 4.4kΩ
130dB
4P Mini XLR
Parts Identification & Accessories
4-1 Receiver
US-8001D Single Channel PLL Diversity Receiver
Power On
Channel Selector
RF indicator
AF indicator
Volume control
Antenna
DCV Input (12-18V DC/600mA)
Unbalanced 6.3mm jack socket
Balanced XLR socket
Accessories
AF output cable (With unbalanced ∅6.3 plug)
AC/DC adaptor
Scerwdriver
1
2
3
4
5
6
7
8
9
10
11
12
06
4
12
3
4
5
6
7
8
9
10
11
12
US-8002D Dual Channel PLL Diversity Receiver
Power On
Channel Selector
RF indicator
AF indicator
Volume control
Antenna
DCV Input (12-18V DC/600mA)
Unbalanced ∅6.3mm jack socket
Balanced XLR socket
Accessories
AF output cable (With unbalanced 6.3 plug)
AC/DC adaptor
Scerwdriver
1
2
3
4
5
6
7
8
9
10
11
12
07 DUAL CHANNEL PLL DIVERSITY WIRELESS SYSTEM
7
8
99
12
3
4
5
6
10
11
12
08
4-2 Handheld Transmitter
Mh-850 Handheld Transmitter
Interchangeable capsule module
Baery tray release knobs
Baery tray
Channel selector
Power On/O switch
LED Indicator
ID housing
Mh-750 Handheld Transmitter
Interchangeable capsule module
Baery tray release knobs
Baery tray
Channel selector
Power On/O switch
LED Indicator
ID housing
1
2
3
4
5
6
7
8
9
10
11
12
13
14
8
10
9
11
12
13
14
Mh-8016 Handheld Transmitter
Interchangeable capsule module
Power On/O switch
Channel selector
Gain control
Baery tray
4-3 Body-pack Transmitter
PT-850B
Mic. input (mini 4 pin XLR socket)
Power On/O switch
Antenna
LED indiccator for power
and baery status
Baery tray
AF leavel control
Carry case
Belt-loop
Channel selector
09 DUAL CHANNEL PLL DIVERSITY WIRELESS SYSTEM
1
1
2
3
4
5
2
3
4
5
6
7
7
8
8
9
9
10
10
11
11
12
12
13
13
14
14
6
10
PT-850Bmi
Mic. input (mini 4 pin XLR socket)
Power On/O switch
Antenna
LED indiccator for power
and baery status
Baery tray
AF leavel control
Carry case
Belt-loop
Channel selector
Aenuation Pad
4-4 Condenser Microphones
Lavaliere Microphone
Clip
4 Pin Mini XLR
Windscreen
1
2
3
4
5
6
7
8
9
10
11
12
12
3
4
9
6
8
5
13
11
12
13
10
7
11
11
CM-501
CM-125
CM-201
11 DUAL CHANNEL PLL DIVERSITY WIRELESS SYSTEM
Headset Microphone
Gooseneck
Headband
4 Pin Mini XLR
Windscreen
Instrument Microphone
Gooseneck
Clip
4 Pin Mini XLR
Windscreen
1
2
3
4
5
6
7
8
3
4
5
6
78
1
1
1
1
2
2
2
2
5
CM-204
CM-225
CX-508W CX-516W
CM-204U
CX-504
12
Ear-hook Microphone
Boom
Adjustable Handband
Adjustable ear hook
4 Pin Mini XLR
Cable clip
Windscreen
Detachable Cable
4-5 Optional Accessories
DR-900 Dual Rack Adaptor
RP-900 Panel Cover
1
2
3
4
5
6
7
8
9
CM-804
CM-802
CM-825
CM-815
2
3
1
2
3
1
3
1
3
1
5
46
7
7
7
7
8
9
13 DUAL CHANNEL PLL DIVERSITY WIRELESS SYSTEM
Preparing procedures & basic operation
5-1 Receiver
(1) Audio Output Connector
e receiver equipped with both balanced XLR output and unbalanced ∅6.3mm
jack output; you can choose the proper way for using.
Connect one end of the AF output cable to the AF output socket in the rear panel of
receiver and plug another end to the “MIC IN” input socket of a mixer or amplier.
(Step 1 of Figure 1)
(2) Power output connector
Connect one end of AC/DC adaptor cable to DC input socket in the rear panel of
receiver, and plug another end into an AC outlet. (Step 2 of Figure 1)
5
(Figure 1)
14
5-2 Battery Insertion of the transmitter
(1) Mh-850 & Mh-750 Handheld Transmier
1. Turn the microphone ball grille counter-clockwise (Step 1 of Figure 2), press
both release knobs to remove the baery tray from the mic. housing (Step 2 of
Figure 2).
2. Insert two 1.5V baeries according to the correct polarity, and return the baery
tray back to housing (Step 3 of Figure 3). Aim the connecting pins exactly
toward the cavities on the boom side of detachable mic. capsule module (Step 4
of Figure 3), and tighten it clockwise!
(Figure 2)
(Figure 3)
15 DUAL CHANNEL PLL DIVERSITY WIRELESS SYSTEM
(2) Mh-8016 Handheld Transmier
Insert 2 pcs 1.5V AA baeries into the baery tray. (Figure 1)
Aer puing into the baery, switch on the power switch. (Figure 2)
(3) PT-850B / PT-850Bmi Body-pack Transmier
Slide the baery tray cover in the direction of the arrow to open it. Insert two 1.5V
baeries according to the correct polarity, and return the cover.(Figure 3)
(Figure 1)
(Figure 2)
1
2
(Figure 3)
16
5-3 Rack Mounting
(1) Before mount receivers onto DR-900 rack adaptor, please release any cables from
the rear of the receiver.
(2) Turn over receiver and DR-900 rack adaptor simultaneously, there are 4 threaded
holes each in the boom of receiver and rack adaptor for inserting screws.
(3) Single receiver
Insert in a receiver through the front of DR-900 until it is rmly aached to the
rack, then screw on a RP-900 to another side of the rack. (Figure 4)
(4) Dual receivers
e same way as above, put one
receiver to each rack space.
(Figure 4)
17 DUAL CHANNEL PLL DIVERSITY WIRELESS SYSTEM
5-4 Installation of condenser microphones
(1) Lavalier microphone
Aach a laveliere microphone to , tie, lapel, where is suitable for sound pick-up. Plug
the connector into input socket on the body-pack transmier. (Figure 1)
(2) Headset microphone
Put the headband behind your head, and x the temples on your ears as (Figure 2)
shows, then adjust the gooseneck to have best miking. Plug the connector into
input socket on the body-pack transmier. (Figure 2)
MIC IN
(Figure 2)
(Figure 1)
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24

JTS US-8001D User manual

JTS
Brand
JTS
Model
US-8001D
Category
Microphones
Type
User manual
This manual is also suitable for

JTS US-8001D is a single-channel PLL diversity wireless system that gives you reliable wireless transmission for your audio signals. It boasts a UHF band operation, which is less prone to RF interference than the VHF band. Thanks to the PLL synthesized technology, you get 16 selectable channels to choose from, reducing the risk of interference from other wireless devices. With its true diversity reception, you can enjoy stable signal reception even in challenging environments.

The built-in adjustable squelch control allows you to minimize background noise, ensuring clear and intelligible audio. The tuned antennas enhance the stability of RF reception, contributing to the overall reliability of the system. To prevent unwanted interference, the US-8001D is equipped with both Tone Key Squelch and Noise Mute detection features.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents