73 cc. & 64 cc.
INDUSTRIAL POWER CUTTERS
73 cc. MODELS 64 cc. MODELS
DPC7310 (12'') DPC6410 (12'')
DPC7311 (14'') DPC6411 (14'')
73 cc.MODELS 64 cc. MODELS
DPC7310 (12'') DPC6410 (12'')
DPC7311 (14'') DPC6411 (14'')
ADVANCED AIR FLOW
MULTI-PURPOSE INDUSTRIAL SAW FOR A SMOOTH SQUARE CUT
Advanced Directional Air Flow System Improves Air Intake and Filtration for Increased
Power and Longer Life
Reinforced Aluminum Blade Guard has 70° Range of Limitless Positioning
Quick Switch Cutting Arm for Horizontal and Vertical Applications
EPA Phase II Compliant with Improved Exhaust Emissions
Ideal for Cutting Structural Steel Girders, Angle Iron, I-Beams,
Cast Iron Pipe, Stone, Masonry and Much More
POWER
POWER
Computer controlled ignition
system with large flywheel and
rare earth magnets create more
efficient power
PERFORMANCE
PERFORMANCE
Five-stage filter system with
Advanced Directional Air Flow
ensures clean air for increased saw
performance and long engine life
VERSATILITY
VERSATILITY
Change blade from central
to outbound (flush) position for
lateral cuts in less than 2 minutes
EFFICIENCY
EFFICIENCY
Larger air filter with increased
surface area for efficient dust
removal and improved air quality
Model DPC7310 DPC7311 DPC6410 DPC6411
Engine
Displacement4.5 cu.in. / 73 cc. 4.5 cu.in. / 73 cc. 3.9 cu.in. / 64 cc. 3.9 cu.in. / 64 cc.
Maximum Power 5.6 HP / 4.2 kW 5.6 HP / 4.2 kW 4.4 HP / 3.2 kW 4.4 HP / 3.2 kW
No Load Speed 9,350 RPM 9,350 RPM 9,350 RPM 9,350 RPM
Max Spindle Speed 4,300 RPM 4,300 RPM 4,300 RPM 4,300 RPM
Max Cutting Depth 3-13/16'' (97 mm) 4-13/16'' (122 mm) 3-13/16'' (97 mm) 4-13/16'' (122 mm)
Fuel Tank Capacity 37 oz. 37 oz. 37 oz. 37 oz.
Fuel Mix 50:1 50:1 50:1 50:1
Arbor 20 mm 20 mm 20 mm 20 mm
Wheel Diameter 12'' (305 mm) 14'' (356 mm) 12'' (305 mm) 14'' (356 mm)
Net Weight 21.6 lbs. (9.8 kg) 22.0 lbs. (10.0 kg) 21.4 lbs. (9.7 kg) 21.8 lbs. (9.9 kg)
Shipping Weight 28.0 lbs. 28.0 lbs. 28.0 lbs. 28.0 lbs.
Master Carton Qty. 1 1 1 1
UPC Code 088381-06360-9 088381-06361-6 088381-06358-6 088381-06359-3
Specifications
Specifications
Accessories
Accessories
Features & Benefits
Features & Benefits
■12'' Cut-off Wheel (965-210-621), Models DPC7310 & DPC6410
■14'' Cut-off Wheel (965-210-222), Models DPC7311 & DPC6411
■Universal Wrench (941-719-140)
■Torx Key (940-827-000)
■Screwdriver (944-340-001)
■Adapter Ring (22 mm to 1'') (394-228-120)
■Dolly (DT2000)
■Water Attachment Kit (394-365-600)
■1 Gallon Mix (2.6 oz.) 50:1 Fuel Mix (181115-A)
■2.5 Gallon Mix (6.4 oz.) 50:1 Fuel Mix (181114-A)
■Assortment of 12'' & 14'' Diamond Blades
■Assortment of 12'' & 14'' Cut-off Wheels
Standard Equipment
Standard Equipment
■Five-stage, foam-paper-nylon system with Advanced Directional Air Flow provides
very clean air for better saw performance
■Reinforced aluminum blade guard with 70° range of limitless positioning using
a marked knob handle
■Improved ignition system with larger flywheel and rare earth magnets for more power
■Cutting arm position simply changes from center position to flush (outboard) position
allowing cuts directly adjacent to curb edges, walls or directly above the ground
■Starter grip and decompression valve located on the same side for faster starting
■On-Off-Choke operating switch on a single lever for operator convenience
■Cushioned operator grips with 4 vibration-absorption rubber buffers for
increased operator comfort
■Water kit is assembled to saw and can be used with garden hose, gravity tank
or pressure tank
■Improved exhaust emissions are EPA Phase II compliant while maintaining power
and performance
All specifications subject to change without prior notice. All models and accessories subject to stock on hand.
NTF-0405 5M MA-0248-05 For more information, call 1-800-4MAKITA or visit makitatools.com Makita U.S.A., 14930 Northam St.,La Mirada, CA 90638
Models DPC7310/DPC7311/DPC6410/DPC6411
73 cc. & 64 cc. INDUSTRIAL POWER CUTTERS
Makita offers a wide variety of accessories for Power Cutters. For a complete listing, please
refer to the Makita General Catalog, or visit our website at makitatools.com, or call 1-800-4MAKITA.
Model DPC7311
Model DPC7310
Model DPC6411
Model DPC6410
Dolly (DT2000)
-
1
-
2
Makita DPC6411 User manual
- Category
- Circular saws
- Type
- User manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Makita DPC8111 User manual
-
-
Makita DPC7311 (UK) User manual
-
-
Makita DPC8131 User manual
-
-
-
-
-