AVF EAK70B-A
Below you will find brief product information for AVF EAK70B-A. This device is a speaker that can be mounted on a wall or ceiling. It has a 5.5mm (7/32") and 3mm (1/8") stud finder which helps to find the center of a wood stud or the edge of a solid wall. It comes with screws, and the screw thread should be lubricated with soap before tightening. Do not overtighten the screws, and tighten them by hand only.
AVF EAK70B-A
Below you will find brief product information for AVF EAK70B-A. This device is a speaker that can be mounted on a wall or ceiling. It has a 5.5mm (7/32") and 3mm (1/8") stud finder which helps to find the center of a wood stud or the edge of a solid wall. It comes with screws, and the screw thread should be lubricated with soap before tightening. Do not overtighten the screws, and tighten them by hand only.
AVF EAK70B-A
Below you will find brief product information for AVF EAK70B-A. This device is a speaker that can be mounted on a wall or ceiling. It has a 5.5mm (7/32") and 3mm (1/8") stud finder which helps to find the center of a wood stud or the edge of a solid wall. It comes with screws, and the screw thread should be lubricated with soap before tightening. Do not overtighten the screws, and tighten them by hand only.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI