TAMUZ KVM 1730W Operating instructions

Operation Manual

Preliminary Version

OSPREY G3 series

KVM xx50W / xx51W

24558 Henstedt-Ulzburg | Germany | ..49 - (0)700 - TAMUZLCD [82 689 523]

use of electronic systems, in any form (print, photocopy, microfilm or other proceedings), without written

permission of the right owner.

oder anderen Verfahren) ohne schriftliche Genehmigung des Rechteinhabers reproduziert oder unter

Verwendung elektronischer Systeme verarbeitet, vervielfältigt oder verbreitet werden.

Concept, Publishing and Production: E.L.B.E medi@, Henstedt-Ulzburg

Printed in Germany

I. Issue OSPREY G3 Series Digital Broadcast Monitor

valid for Firmware Release 2.05 and above

TAMUZ Broadcast Monitors

+49 - (0)700 TAMUZLCD [82 689 523]

eMail: info@tamuz.tv

www.tamuz.tv

Rights reserved to change specifications and design without notice

Technische und farbliche Änderungen vorbehalten

OSPREY G3 Series Digital Broadcast Monitor

Table of Content

Introduction...................................................................4

Digital Broadcast Monitor............................................4

OSPREY G3 series models...........................................5

ISO Product Quality....................................................6

Pixel Errors..............................................................6

Class of Usability.....................................................6

Class of Reflections..................................................7

General Safety Instructions.............................................8

Limitation of the product..............................................8

Duty of care of the user...............................................8

Safety symbols............................................................8

Basic Safety Instructions...............................................9

Service and Maintenance.........................................9

Observe environmental protection prescriptions.........9

Recycling..................................................................10

Recognition of the copyrights.....................................10

Guarantee agreement:.................................................11

Guarantee period..................................................11

Guarantee exceptions............................................11

Guarantee Certification..........................................11

Warranty Card.............................................................12

Transport of the equipment...........................................13

Transportation..........................................................13

Weight..................................................................13

Packing....................................................................13

Return dispatch......................................................13

Damages in transit................................................13

Conformity Declaration................................................14

Technical Data............................................................15

System Hardware......................................................15

Features......................................................................16

OSPREY G3 series.....................................................16

Image Display Functions and Measurement.............17

Controls and their Functions.........................................21

Front Panel...............................................................21

Rear Panel................................................................23

OSD Menu..................................................................24

Menu structure..........................................................24

Top- and Sub-Menus.............................................24

Menu Operation.......................................................25

Menu Item Description..............................................26

Picture..................................................................26

Image Adjustment..................................................26

Setup....................................................................27

Audio...................................................................29

PIP/PBP.................................................................29

System Status........................................................30

Factory Reset............................................................31

Remote Control............................................................32

Hardware connection................................................32

Software Configuration.............................................32

Communications test.................................................32

Commands...........................................................33

Stand Installation Instruction ........................................34

Block Diagrams...........................................................36

Blockdiagramm TFT Panels.................................36

Safety Notice...............................................................37

Remarques de sécurité.................................................38

Indicaciones de seguridad............................................39

Instruções de segurança...............................................40

Norme di sicurezza......................................................41

Sikkerhedsanvisninger..................................................42

Säkerhetsinformationer................................................43

Turvallisuusohjeet........................................................44

Sikkerhetsanvisninger...................................................45

Öryggisleiðbeiningar....................................................46

Veiligheidsvoorschriften................................................47

Introduction OSPREY G3 Series

Introduction

Digital Broadcast Monitor

The TAMUZ OSPREY G3 series monitors are our range of cost effective Digital Video Control Monitors

for SD and HD Broadcast and Production Applications in various screen sizes starting from 7“wide up to

to 24“ wide.

The OSPREY series monitors are designed as an universal digital control monitor, equipped with analog,

DVI/HDMI and SDI inputs, to display HD studio signals directly. They are an ideal solution for viewing

the output of Cameras, Switchers or other Broadcast Equipment for confidence or quality. This monitors

are available as desktop or rack mountable devices.

Introduction OSPREY G3 Series

OSPREY G3 series models

The signal processor contains a set of micro computer controlled DSP's and scalers with native serial ca-

pability. Various models are available within series.

Model Screen Size Freq-V Hz Aspect Ratio Screen Resolutions SDI DVI/HDMI Analog

KVM 7050W 7“ 50 - 60 15 : 9 1024 x 600 2x 1x 3x

KVM 9050W 8.9“ 50 - 60 15 : 9 1280 x 768 2x 1x 3x

KVM 1730W 17“ 50 - 60 16 : 9 1366 x 768 2x 1x 3x

KVM 1750W 17“ 50 - 60 16 : 9 1920 x 1080 2x 1x 3x

KVM 1751W 17“ 50 - 60 16 : 9 1366 x 768 2x 1x 3x

KVM 1930W 19“ 50 - 60 16 : 9 1366 x 768 2x 1x 3x

KVM 2250W 21“ 50 - 60 16 : 9 1920 x 1080 2x 1x 3x

KVM 2350W 22.5“ 50 - 60 16 : 9 1920 x 1080 2x 1x 3x

KVM 2450W 24“ 50 - 60 16 : 10 1920 x 1200 2x 1x 3x

Introduction OSPREY G3 Series

ISO Product Quality

For the production of TAMUZ video monitors LCD panels complies with the standard ISO 13406-2, er-

ror-class 1 or 2, only. This ISO standard 13406-2 defines the scales for ergonomic and picture quality.

The LCD panel manufactures itself (like AU, CMO, LG-Philips, NEC, Samsung, Sharp or Toshiba) don't

guarantees absolute any errorlessness and don't guarantees that the LCD panels are free of sticking ef-

fects.

Pixel Errors

Following limited values which may not exceed are valid.

ISO 13406-2 Typ 1 Typ 2 Typ 3 max. Distance connected Defects

Class I 0 0 0

Class II 2 2 5 1 defect pixel within a circle of 5

mm

maximum 2 defective sub-pixel

beside each other

Class III 5 15 50 2 defect pixels within a circle of 5

mm

maximum 2 defective sub-pixel

beside each other

Class IV 50 150 500

Error-type #1 describes errors by a complete bright (white) pixel, error-type #2 describes errors by a

complete dark (black) pixel, error-type #3 describes errors by defective sub-pixels of the colors red,

green and blue, which are completely bright or dark.

A single LCD pixel is built by a set of three sub-pixels, one of red, green and blue.

Error class I contains highly selected panels with no pixel error anyway. Panels within this class are rare

and very high priced. Panels from the error class II are the most common selection for high quality indus-

try applications. The error class III defines the mass production selection for IT applications. TFT panels

related to the error class IV are not useful for a LCD monitor at all.

Class of Usability

Next the standard ISO 13406-2 defines the classification of usability of LCD screens.

Usability Classification Description

Class 1 This permits several users to view the entire display area at the same time. This ap-

plies for intended viewing distance (between 40 to 60 cm, depending on the size

and resolution of the monitor) and for a viewing angle within an 80° cone in front

of the screen without any restriction of visual efficiency, in such a way that bright-

ness, contrast and color is maintained

Class 2 Permits a single user to view the entire area of the display. This applies for inten-

ded viewing distance (between 40 to 60 cm, depending on the size and resolution

of the monitor) from every position in front of the screen, in such a way that bright-

ness, contrast and color is maintained.

Class 3 Permits a single user to view the entire area of the display. This applies for inten-

ded viewing distance (between 40 to 60 cm, depending on the size and resolution

of the monitor) from one fixed position in front of the screen, in such a way that

brightness, contrast and color is maintained.

Class 4 Permits a single user to view the center area of the display. This applies for inten-

ded viewing distance (between 40 to 60 cm, depending on the size and resolution

of the monitor) from one fixed position in front of the screen, in such a way that

brightness, contrast and color is maintained.

All of the TAMUZ OSPREY series monitors comply with class 1.

Introduction OSPREY G3 Series

Class of Reflections

The reflection characteristics of an LCD Screen are of particular importance in very bright ambient condi-

tions or in an environment with multiple light sources. The ISO standard provides for three quality clas-

ses.

Reflection Classification Description

Class 1 General office conditions without special requirements as to workspace lighting.

Class 2 Appropriate for most office conditions, with few exceptions.

Class 3 Appropriate for office environments, with controlled luminance conditions.

All of the TAMUZ OSPREY series monitors comply with class 1.

General Safety Instructions OSPREY G3 Series

General Safety Instructions

Limitation of the product

The technology itself and some parts built-in the TAMUZ OSPREY G3 series have limitations which the

user have to understand and accept.

The user must accept that it is necessary

•

to avoid condensation of water within the OSPREY G3 series. It may result in improper

operation or disconnection of electrodes.

•

not to exceed the absolute maximum rating value. (input voltage variation, environmental

temperature and so on) Otherwise the receiver may be damaged.

•

the antenna must be grounded correctly. Please observe the relevant regulations.

Duty of care of the user

The OSPREY G3 series was designed and built under the harmonized norms to be adhered as well as

further technical specifications. It corresponds to the state of the art and ensures a maximum amount of

safety.

However, this safety can only be reached, if all safety measures are taken in the operational practice. It is

the duty of the OSPREY G3 series user, to plan these measures and check their explanation.

The user must guarantee that

•

the OSPREY G3 series is only used as agreed (cf. chapter product specification)

•

the OSPREY G3 series is operated only in faultless, working condition and particularly the

safety facilities are checked for their function efficiency regularly

•

the OSPREY G3 series operator's manual always be placed in a complete and legible

condition for disposal

•

only sufficiently qualified and authorized staff operates, maintains and repairs the OSPREY

G3 series

•

staff is instructed to meet work safety and environmental protection regulation and knows the

operator's manual as well as there particularly contained safety instructions

•

all appropriate safety and warning notes not being removed and remaining legible at the

OSPREY G3 series

Constructive changes at the OSPREY G3 series may be carried out only after written permission by the

manufacturer!

Safety symbols

The following safety symbols are applied in this operator's manual. These symbols shall primarily draw

the attention of the reader to the text of the accompanying safety note.

This symbol points out that there are dangers for life and health of

persons.

This symbol indicates information which contributes for a better

understanding of the function of the equipment.

General Safety Instructions OSPREY G3 Series

This symbol points out that there are dangers for material and

environment or the equipment himself.

Warning about dangerous electrical voltages to or within the

equipment.

Basic Safety Instructions

The OSPREY G3 series only may be used by persons who are trained, authorized and has knowledge of

the operator's manual.

Before every production, check the OSPREY G3 series for visible damages and make sure that it is ope-

rated in faultless condition! Report noticed deficiencies to the supervisor immediately or schedule to re-

store by qualified persons.

Service and Maintenance

Adhere to the specified inspection and maintenance intervals in the operator's manual!

•

Before maintenance and repair work it must be guaranteed that all parts of the OSPREY G3

series have cooled down on space temperature!

•

Smear-, cool- or cleaning-fluids, endangering the environment, must be disposed duly!

•

Repair work on the electrical power supply of the OSPREY G3 series system must be done by

a trained electric qualified employee!

•

Damaged lines or cables have to be immediately replaced!

Released bolted joints must be checked for solid seat before putting into operation after maintenance or

repair work and it must be guaranteed, that removed system-unit cover parts or filters were re-installed!

Observe environmental protection prescriptions

The legal duties for waste avoidance and proper utilization for elimination must be adhered at all work

stations, also including the OSPREY G3.

During repair, installation and maintenance work, be aware of water endangering substances such as;

•

Lubricating greases and oil

•

Hydraulics oils

•

Coolant

•

solvent containing cleaning liquids

don't load the floor or reach into the sewage system!

Note: The valid environmental protection prescriptions must be observed.

These water endangering substances must be kept, transported, caught and disposed in suitable contai-

ners!

General Safety Instructions OSPREY G3 Series

Recycling

If OSPREY G3 series monitor no longer operates or is un-repairable, please do not dispose the receiver

in the trash.

Please return the receiver to your local dealer or TAMUZ directly, we will grant the correct and suitable

recycling of the old monitor.

Note: Don't waste unused, old or broken monitors. Follow your local environmental protection

prescriptions.

Recognition of the copyrights

The user of the OSPREY G3 series appreciates, that in the OSPREY G3 series contains software pro-

grams as well as this documentation is subject to the copyright laws as well as copyright propriety and

other protection rights and does not purchase this with the acquisition or the use of the OSPREY G3 se-

ries system by any time. The user obtains rather merely the right for the exclusive use of the OSPREY G3

series.

In the OSPREY G3 series contained software as well as the accompanying documentation may not be

changed, enlarged or adapted to other systems or translated into other languages, without written per-

mission of the author. With the installation and use of the OSPREY G3 series the user recognizes these li-

cense and use conditions.

Note: The OSPREY G3 series system contains copyright protected software and

documentation's.

Guarantee agreement: OSPREY G3 Series

Guarantee agreement:

In the OSPREY G3 series system contains software and the instructions are left to the user as they are.

This means, the author of the software or the instructions doesn't assume any liability for the suitability of

the software or the documentation to any special purpose. He particularly isn't liable for damages or se-

quential damages which indirectly deliberately or unintentionally arise from the use of the OSPREY G3

series or the documentation directly.

The OSPREY G3 series system and the documentation can be changed and enlarged without previous

announcement at any time. Rights for updates free of charge does not apply.

Guarantee period

TAMUZ Monitors, the manufacturer of the OSPREY G3 series grants a guarantee period of 24 months

on the faultless function of the system and its components.

Guarantee exceptions

Claims for defects shall not exist in cases of

•

natural wear and tear and damages, defects, reduced output, and changes of condition or

operation of our product due to extraneous cause (for example impact, blows, agitation, water,

fire), improper storage, treatment or erection, unusual climatic conditions, special conditions at

receipt or operational conditions at the location of use, or force majeure;

•

defects due to construction and material deficiencies, as far as the customer has specified the

construction or the material.

•

Image Sticking on LCD-Panel, which is caused by permanent pictures as well as Gap Mura on the

LCD-Panel.

Guarantee Certification

Please, send in the full guarantee certification upon receipt of the product to the manufacturer or sup-

pliers within 21 working days. The manufacturer or supplier only then can grant possible rights to claim

under guarantee in full size and transmitting current information about software updates and indications

for expansions or for the operation of the equipment to you.

Note: Only if the guarantee card of the OSPREY G3 series has been returned intime to the

manufacturer or supplier, rights to claim under guarantee can be asserted against the

manufacturer or supplier.

Warranty Card OSPREY G3 Series

Warranty Card

To come in the position to reclaim your warranty rights, send in this warranty card within 21 days to the

manufacturer (TAMUZ Monitors, Germany) or your local dealer. Check the web site www tamuz.tv, www

tamuz.de or www tamuz.us for the correct address.

Garantie Registrierungskarte - Warranty Registration Card

Model: TAMUZ OSPREY G3 Type:

Seriennummer: Serial Number:

Dieses Gerät wurde gekauft bei: - The Unit was purchased from:

Händler:

Ort.

Land:

Dealer:

City:

Country:

Verkaufsdatum: Purchase Date:

Dieses Gerät wurde gekauft von: - The Unit was purchased by:

Kunde: Customer:

Ansprechpartner: Contact Person:

Firma: Company:

Strasse: Street:

PLZ: Zip Code:

Ort: City:

Land: Country:

Telefon: Phone:

Telefax: Fax:

Email: Email:

Dieses Gerät wird eingesetzt im: - This Unit will be used at:

Regieraum: Control Room:

Schaltraum: Distribution:

Studio: Studio:

Ü-Wagen: OB-Truck:

Kopieranlage: VTR-Dubbing:

Schnittplatz: Editing:

Sprecher-Raum: Off-Room:

Andere: Other:

Unser Bestreben ist es, unsere Produkte kundengerecht zu entwickeln und fertigen. Wir sind Ihnen dankbar, wenn Sie sich Zeit

für Anregungen oder Kommentare nehmen:

Our mutual interest is, to design and manufacture practical products. We appreciate you taking the time to note your informati-

on and comments you may have.

Transport of the equipment OSPREY G3 Series

Transport of the equipment

Transportation

The OSPREY G3 series is a sensitive electronic product and should be transported with all caution. Thro-

wing the equipment or hard pushes during the transport must be avoided.

Weight

The OSPREY G3 series weights inclusive of the accessories and his packing less then 10 kg and should

be carried under consideration of the accident prevention measures or transported with help of corre-

sponding aids therefore by two persons.

Note: Observe the accident prevention prescriptions at the transport of the OSPREY G3 series

to the avoidance of persons and damages to property.

Packing

The OSPREY G3 series is delivered in a special transport carton. It recommends itself to keep this carton

and the accompanying packaging. So in the case of a later necessary transport and dispatch the equip-

ment can be packed and protect against damages as delivered to you.

Return dispatch

At a return dispatch without original packing to the supplier or manufacturer the liability is excluded.

Don't forget to ask for a RMA (return material authorization) number before you send any material back

to the manufacturer. Check for a RMA the web-site www.tamuz.tv, www.tamuz.de or www.tamuz.us.

Damages in transit

Check the contents of the received transport carton with the delivery note or the invoice on completeness

and inform your supplier if you have missing parts upon receipt of the product. Please contact within 5

working days. If you receive a delivery on which the transport carton or the contents is damaged, pro-

ceed after the known guidelines of the cargo shipper, (which as a rule is enclosed with the delivering pa-

pers). Perhaps stricter terms must be taken into account.

Note: Check before using the OSPREY G3 series whether damages in transit have been

happened and arrange a repair of these damages if necessary.

Conformity Declaration OSPREY G3 Series

Conformity Declaration

to EMV/EMC guideline (89/336/EC)

to low-voltage guideline (73/23/EC chapter 10)

The manufacturer:

TAMUZ Broadcast

Kirchweg 62B

D-24558 Henstedt-Ulzburg

declares hereby, that the product:

Product name: Monitor

Model number: OSPREY G3 series

Year of construction: 2012

corresponds to the regulations of the guidelines described above:

The following harmonized norms were used:

EN 55011 ISM Equipment, Group 1, Class A

EN 55022 Conducted Emissions, Class B

EN 50081-2 Generic standard interference transmission, industry area

EN 50082-2 Generic standard interference immunity, industry area

prEN55103-1 EMV product family norm for Audio-, Video and audio-visual facilities

as well as for studio light control facilities for the professional usage,

-Part 1: Limiting values and measurement procedure for disturbing

emissions

prEN55103-2 EMV product family norm for Audio-, Video and audio-visual facilities

as well as for studio light control facilities for the professional usage,

-Part 2: Requirements on the interference immunity

EN 61000-3-2 Power Factor Harmonic Correction

EN 61000-3-3 Flicker & Voltage Fluctuation Limits

EN 61000-4-2 Electrostatic Discharge Immunity

EN 61000-4-3 Radiated Electromagnetic Fields

EN 61000-4-4 Fast Transients-Burst Immunity

EN 61000-4-5 Input Surge Immunity

EM 61000-4-6 Conducted RFI

EN 61000-4-11 Voltage Dips

The following national or international norms (or parts/clauses from this) and specifications were used:

DIN EN 6099 Verbindungsmaterial für Niederspannungsstromkreise für Haushalt und

ähnliche Zwecke; Teil 1: Allgemeine Anforderungen

IEC 127-6 Geräteschutzsicherungen

Henstedt-Ulzburg, 08.10.2012

Erwin W. Lissy

CEO / President

Technical Data OSPREY G3 Series

Technical Data

System Hardware

The hardware of the Video Monitor consists of the following components which are installed in an ele-

gant and emission shielded full metal system-unit cover of high quality:

Item KVM 1750W KVM 1751 W KVM 2250W KVM 2350W KVM 2450W

System Frame KVM 1750 KVM 1750 KVM 2250 KVM 2350 KVM 2450

Dimensions 430 x 290 x 80 430 x 290 x80 530 x 350 x 85 560 x 410 x 85 575 x 420 x 85

Weight 5,8 kg 5,8 kg 6,7 kg 0 kg 9,3 kg

Mounting VESA 100 VESA 100 VESA 100 VESA 100 VESA 100

Display Size 17.1“ 17“ 215“W 23.5“W 24“

Display Type *1 *1 *1 *1 *1

Display Technology amorph silicon amorph silicon amorph silicon amorph silicon amorph silicon

Resolution 1920 x 1080 1366 x 768 1920 x 1080 1920 x 1080 1920 x 1200

Dot Format RGB, square RGB, square RGB, square RGB, square RGB, square

Display Aspect Ratio 16 : 9 16 : 9 16 : 9 16 : 9 16 : 10

Color Format 30 bit full color 24 bit full color 24 bit full color 24 bit full color 30 bit full color

Luminance max. 300 cd/m2max. 400 cd/m2max. 400 cd/m2max. 450 cd/m2max. 400 cd/m2

Contrast >1.000 : 1 >900 : 1 >1.000 : 1 >1.000 : 1 >1.000 : 1

Viewing Angle ±85° H, ±85° V ±85° H, ±85° V ±85° H, ±85° V ±85° H, ±85° V ±85° H, ±85° V

Viewing Direction 06:00 h 06:00 h 06:00 h 06:00 h 06:00 h

Display Class ISO 13406-2 ISO 13406-2 ISO 13406-2 ISO 13406-2 ISO 13406-2

Pixel Error Class class 2 class 2 class 2 class 2 class 2

*1 = or similar alternative, *2 = optional feature

Features OSPREY G3 Series

Features

OSPREY G3 series

The OSPREY G3 series monitors offers following features:

•

High resolution LCD panel - LED backlight and high resolution; The high-brightness, high contrast,

high-speed response and wide viewing angle technology help the monitor can be used under

variety of lighting conditions

•

Durable and lightweight design; Full metal durable and lightweight design provides easy operation

for post-production and OB vans applications.

•

Two Colors Tally Indicator; Two Colors Tally Indicator as red and green, to monitor each input

signal and check ON-AIR mode.

•

Auto-detection of all color system (PAL, NTSC, SECAM); This unit automatically detects the color

standards

•

3D video decoder; Process 3D decoding on VIDEO signals, to realize better reduce cross color

•

Motion-Adaptive De-interlacing; The de-interlace converts interlaced video to progressive video by

motion detection, reduce the serrated image.

•

10BIT data Processing; Signal input, signal processing and image output are 10bit data processing,

to ensure the details of the image display

•

Y/C Input; Decomposition for the luminance signal (Y) and chrominance signals (C) of the video

signal can be input through this connector

•

SDI Input; 3G/HD/SD-SDI video signal can be input through this connector

•

YPbPr Input; HD/SD-YPbPr video signal(Compatible YCbCr) can be input through this connector

•

DVI/HDMI/VGA Input; DVI/HDMI/VGA signals can be input through this connector. (HDMI via

HDMI-DVI connector, VGA via VGA-DVI connector)

•

Signal Source Loop Through; Signal that linked to the input connector will be enlarged and linked to

output connector. SDI re-clocked loop through ensure the signal without enervation.

•

PIP/PBP; SDI input signal can be displayed with another signal of VIDEO, S-VIDEO, COMPONENT,

HDMI simultaneously, and showing two pictures on the screen.

•

SWAP Function; In PIP/PBP mode, two pictures can be swapped between each other

•

Color Temperature Selection; Different color temperatures selection

•

Image size Setting; The display mode is switchable between 16:9, 4:3, full screen, 1:1, and the

original image proportion

•

Marker setting; Show frame borders, center mark, and safety area, etc.

•

HV Delay; Display the blanking period of SDI input signal.

•

Scan mode; Scan mode includes Full Scan, Over Scan and Under Scan. (KVM-2230W and KVM-

2430W are with Full Scan and Over Scan, without Under Scan)

•

Zoom In (focus assist); Zoom in any part of the picture, to watch picture details more clearly, and

assist for focus.

•

Audio level meter (UV+PPM); Show the audio level meter (UV+PPM) for SDI embedded audio

•

Brightness histogram; System automatically analyzes the input signal’s brightness distribution with a

diagram on the screen. X coordinate shows the brightness sampling value, the range is 0 ~ 1023,

the higher value means the higher brightness. Y coordinate shows the percentage of the brightness

in the entire frame picture.

•

Vector scope; Vector UV analysis for color bar signal input

•

Remote control function; Available to connect to the remote terminal to operate the equipment to

directly select the input signal, longitudinal mode settings etc

Features OSPREY G3 Series

Image Display Functions and Measurement

A huge number of image display functions and measurement features are selectable at the OSPREY G3

series monitors. Some of these are selectable by pushing the direct key at front.

Function Description How it looks

AUDIO

Ad audio level meters to

the image.

Select the type and style of

meters in the OSD.

MARKER

Ad marker to the image.

Select the type and style of

markers in the OSD.

Out-of-area can be get a

dark overlay

WAVEFORM

Ad waveform measure-

ment to the image.

Available for SDI In 1

VECTORSCOPE

Ad vector measurement to

the image.

Available for SDI In 1

Features OSPREY G3 Series

Function Description How it looks

HISTOGRAM

Ad histogram measure-

ment to the image.

Available for SDI In 1

COMBO

Ad waveform, vector and

histogram measurement to

the image.

Available for SDI In 1

PIXEL MEASURE-

MENT

Ad pixel measurement to

the image.

Available for SDI In 1

ZOOM

Open the ZOOM selection

window.

The green marked area

will be shown full screen.

Features OSPREY G3 Series

Function Description How it looks

ZEBRA

Ad zebra measurement to

the image.

Available for SDI In 1

Select the type and style of

zebra in the OSD.

FOCUS

Ad focus measurement to

the image.

Available for SDI In 1

Select the type and style of

focus in the OSD.

FALSE COLOR

Ad false color measure-

ment to the image.

Available for SDI In 1

Select the type and style of

false color in the OSD.

BLUE ONLY Switch the monitor to blue-

only mode.

Features OSPREY G3 Series

Function Description How it looks

BLACK & WHITE Switch the monitor to mo-

nochrome mode.

FLIP Turns the image horizon-

tally.

PIP

Enables the picture in pic-

ture mode.

A second signal wil be dis-

played as a window insert.

Select the source and style

of PIP in the OSD.

PBP

Enables the picture beside

picture mode.

A second signal wil be dis-

played side by side.

Select the source and style

of P in the OSD.

Page is loading ...

TAMUZ KVM 1730W Operating instructions

This manual is also suitable for

TAMUZ KVM 1730W Operating instructions

in other languages

Related papers

Other documents