2. Home
  3. Do-It-Yourself tools
  4. Garden tools
  5. Lawnmowers
  6. Toro
  7. 54in Fab Bagging Enhancement Kit, TimeCutter Riding Mower

Toro 54in Fab Bagging Enhancement Kit, TimeCutter Riding Mower Installation guide

  • Hello! I've reviewed the installation instructions for the Toro TimeCutter 54in Fab Bagging Enhancement Kit, model 161-4522. This document provides detailed steps for preparing your mower, whether it's a gas or electric model, and how to properly mount the new kit components. I am ready to answer your questions about the installation process or features of the kit. Feel free to ask!
  • What should I do before installing the kit on a gas model?
    What should I do before installing the kit on an electric model?
    What should I use when raising the front of the machine?
Form No. 3465-270 Rev A
54in Fab Bagging Enhancement Kit
T imeCutter
®
Riding Mower
Model No. 161-4522
Installation Instructions
Determine the left and right sides of the machine from the normal operating position.
Preparing the Machine
Gas Models Only
1. Park the machine on a level surface.
2. Disengage the blade-control switch.
3. Move the motion-control levers outward to the
PARK position.
4. Shut of f the machine and remove the key .
5. W ait for all moving parts to stop.
6. Allow machine components to cool.
7. Disconnect the spark-plug.
8. For easier access, raise the front of the machine
and support it using jackstands rated for your
machine.
W ARNING
Mechanical or hydraulic jacks may fail to
support the machine and cause serious
injury .
Use jack stands when supporting the
machine.
Electric Models Only
1. Park the machine on a level surface.
2. Disengage the blade-control switch.
3. Move the motion-control levers outward to the
NEUTRAL position.
4. Engage the parking brake.
5. Shut of f the machine and remove the key .
6. W ait for all moving parts to stop.
7. Allow machine components to cool.
8. Remove the battery packs from the machine.
9. For easier access, raise the front of the machine
and support it using jackstands rated for your
machine.
W ARNING
Mechanical or hydraulic jacks may fail to
support the machine and cause serious
injury .
Use jack stands when supporting the
machine.
© 2023—The T oro® Company
81 1 1 L yndale A venue South
Bloomington, MN 55420 Register at www .T oro.com.
Original Instructions (EN)
Printed in the USA
All Rights Reserved
*3465-270*
Installing the Kit
Install the left skirt, left plate, right skirt, and right plate to the mower deck using 10 bolts and 10 nuts.
g307612
1. Nut (10)
3. Right plate
5. Left plate
2. Right skirt
4. Left skirt 6. Bolt (10)
2
/