MODWAY EEI-2575-GRY Assembly Instructions

  • Hello, I'm your chat assistant. I've reviewed the assembly instructions for the Modway Bench EEI-2575. This document includes step-by-step assembly instructions and details about all components, such as the legs, seat frame, and cushion, as well as the necessary hardware for assembly. I am ready to answer your questions about the bench.
  • What tools are needed for assembly?
    How many people are recommended for assembly?
    What components are included?
2.Seat Cushion
BENCH
bench
EEI-2575 BENCH
×6
3
3
3
3
×1
1.Seat Frame × 1 3.Legs
×4
Bolt M6×25mm ×16
Adjustable Glide
( 2 pieces for backup)
and then follow the simple step-by-step
f reach of children.
C
C×4
EEI-2575 BENCH
B
A
C
A×16
B×1 B
3
3
3
3
STEP1:
STEP2:
please find legs package and hardware package between the Seat Frame (1) and the Seat
Cushion (2).
Insert 4 pieces of Leg (3) into the bottom of Seat Frame (1) by Bolt (A) as shown. Do not
fully tighten Bolts (A) for other three legs.
Please adjust the Adjustable Glide (C) in
between the leg and the seat to balance the
chair for uneven floor.
Please carefully turn over the chair.
Please put a heavy object or seat one adult on
top of the Seat Frame (1) to pressure the chair
for leveling.
Fully tighten all Bolts (A) with Allen Wrench (B).
Assembly is complete.
The bench is ready to use now!
B×1
/