2. Swiss Madison
  3. SM-CH02BSM-CH02B

Swiss Madison SM-CH02BSM-CH02B, SM-CH03BSM-CH03B, SM-CH05BSM-CH05B, SM-CH07BSM-CH07B Installation guide

  • Hello! I am a chat assistant and I've reviewed the provided installation instructions for the Swiss Madison Toilet Hardware. This document covers both the flush and seat hardware installation, detailing step-by-step instructions for removing old hardware and installing new ones. I'm ready to answer any questions you have about the process or the hardware itself.
  • What should I do before installation?
    How do I remove the old flush hardware?
    How do I install new flush hardware?
    How to remove the old toilet seat?
    How do I install the new toilet seat?
1. Remove Old Hardware
· Unscrew plastic locking nut. Then pull down on the base
plate and remove the push button from the tank lid.
2. Install New Hardware
· Insert the push button to the top of the tank lid, slide on
the base plate, and screw the plastic locking nut in place.
Swiss Madison
®
INSTALLATION INSTRUCTIONS
Toilet Hardware
swissmadison.com | 1-434-MADISON | [email protected]
Prior to Installation:
· Inspect product to ensure no damages have
occurred while in shipping.
· The step-by-step guidelines in the installation instructions
are a general reference.
· Read installation and maintenance instructions thoroughly
before installing. Be sure to use proper tools and always wear
proper personal safety accessories for your protection.
Included Parts:
· Seat Hardware
· Flush Hardware
· Installation Bolts
If you have any questions or concerns please contact us:
1-434-623-4766
[email protected]
Flush Hardware Installation:
1. Remove Old Hardware
· Push the quick release buttons on your toilet seat and
pull up to remove the seat. Remove old cover caps.
2. Install New Hardware
· Replace old cover caps with new cover caps.
· Align the seat to the hinges and reattach the seat to the bowl.
Seat Hardware Installation:
/