\ Pond Pack Application Tips
Thank you for purchasing an Outdoor Water Solutions Pond Pack(s). For general
application, please follow the instructions below
Step 1: Lake & Pond Water Clarifier Day 1
Apply at the rate of 10 lbs. per ¼ acre of water.
Broadcast evenly across the surface of the pond, by hand
or with the aid of a hand held fertilizer spreader or coffee
can. If using to remove suspended particles, dissolve in
tap water and spray evenly across the pond surface.
Step 2: Lake & Pond Dye Day 1
Throw in 1 packet for a ¼ acre pond with an average
depth of 4 feet.
Re-treat in 30-90 days depending on amount of rainfall,
pond depth and amount of water disturbance.
Step 3: Lake & Pond Bacteria Day 1
Initial application of 4 packets for a ¼ acre pond once
water temperature has reached 50 degrees F.
Re-treat with 2 packets per ¼ acre pond every 2 weeks.
For best results throw the water soluble packet into the pond
close to your aeration system. If you don’t have an aeration
system, throw packet into deeper part of pond.
For ponds that have excessive sediment (black organic matter)
on the bottom or are prone to algae, you may want to double the
application rate of the bacteria for best results.
Note: We recommend using the Pond Packs as a natural solution to help prevent pond
problems from occurring. If you have historically had a lot of algae in your pond, it may
take some time for this program to work. If you do apply a copper based algaecide for
initial control of algae, it is best to wait at least 24 hours before beginning the Pond Pack
treatment program.
For ponds larger than ¼ acre, you may need to purchase multiple Pond Packs to get
season long performance.
Need Help? Call our toll free number 1-866-471-1614 to speak with one of our
specialists or visit our web site at www.pondcarepacks.com
Outdoor Water Solutions, Inc.
Springdale, AR 72764
1-866-471-1614
www.OutdoorWaterSolutions.com