Aeon Matrix YDN1602 User manual

User Guide

VERSION 1.2

Your Smart Sprinkler & Security Guardian

The Yardian Installation

8

What’s in the Box

3

Overview

4

Yardian LED Indicator

5

Wi-Fi Reset Button

6

Understand Your Irrigation System

7

Step 1. Replace your old controller

10

Step 2. Install your Yardian controller

12

Step 3. Get the Yardian app

18

Step 4. Pair your Yardian to your proﬁle

20

Step 5. Wi-Fi onboarding

22

Set-Up of the Yardian App

28

Table of Contents

2

What’s in the Box

(adhere to original controller

wires for easy identiﬁcation)

Yardian, the controller

Model: YDN1602

1

Wi-Fi dongle

2

Labeling stickers

3

3 wall screws and anchors

4

Model: WL-7200-V2

3

Wi-Fi dongle

Wi-Fi reset button

Terminal blocks

Product label

Warranty label

Light sensor

IR LED (night vision)

SN :

MAC :

YID :

AA00754F

H

G

A

B

C

D

E

F

I

LED indicator

Camera

Overview

4

1 second1 second

System

Booting Up

Initializing

Firmware Updating

(Do not turn oﬀ power)

Reboot Required

(Press Wi-Fi Reset Button until LED turns red)

Reboot Required - Action Failed

(Press Wi-Fi Reset Button until LED turns red)

Wi-Fi Station Mode

Connecting to Your Router

Connected to Your Router

Watering

Wi-Fi AP Mode (Direct Control)

Access Point Mode

Watering

Yardian LED Indicator

5

Reset Wi-Fi

Press and hold for around 5

seconds and release when the LED

is blinking green and blue.

>

5

sec

Reset to factory default

Press and hold for around 10

seconds and release when the LED

turns red.

>

10

sec

Wi-Fi Reset Button

SN :

MAC :

YID :

AA00754F

Press

6

Understand Your Irrigation System

Common Wire

Valve

Water

Main

Sprinkler Wires

Wire from controller

to corresponding valve

Water to Zones

Master Valve

Z1

Z2

Z3

Z1

Z2

Z3

P

RAIN

SENSOR

COM

P

1

2

3

4

5

6

ZONES

C

If you have a master valve, we

suggest to connect it to the last

zone and specify it in Yardian

app.

Controller

P

7

8

Set up your Yardian in a few easy steps.

The Installation

9

Take a picture of your current wiring. This will help

you identify the correct sequence of wires.

1

Step

Replace your

old controller

10

Disconnect your old controller and remove sprinkler wires. Adhere a numeric labeling

sticker to tag each associated wire.

Remove your old controller from the wall.

1

2

3

Zones

4

5

6

7

8

9

10

11

12

Exposed sprinkler wires with 24Vac could

generate an electric shock in wet location.

Please ask your retailer or contractor if

sprinkler accessories may be needed.

Electrical

Hazard

WARNING

11

Step 1.

2

Step

Install your

Yardian controller

Identify an appropriate spot to mount your Yardian

so that the camera is able to view your designated

location (e.g., inside the garage).

12

Open the top cover.

Mark the wall for the screws. Mount the Yardian with the screws.

13

Step 2.

Open the inside cover.

SN :

MAC :

YID :

AA00754F

PULL

PUSH

SN :

MAC :

YID :

AA00754F

SN :

MAC :

YID :

AA00754F

14

Step 2.

Connect sprinkler wires according to the

corresponding labels.

SN :

MAC :

YID :

AA00754F

Note: Please specify rain sensor

type (normally open or closed) in

the app if applicable.

Note: If you have a master valve,

we suggest to connect it to the last

zone and specify it in Yardian app.

12 Zones8 Zones

15

Step 2.

Close the inside cover and the top cover.

PRESS

HERE

PRESS

HERE

SN :

MAC :

YID :

AA00754F

CLICK

Note: Please make sure you hear

a click sound by pressing at the

top of the inside cover.

16

Step 2.

Plug the Yardian electrical cord into the home outlet.

17

Step 2.

Download the

Yardian app

3

Step

Create an account and personal proﬁle.

Sign in the Yardian app with your account.

My Account

Video

User Guide

Create Account

18

Enter your Proﬁle Name and your Zip

Code (or click on the map to ﬁnd your

location), then click the "Save" button

to proceed.

Note: The proﬁle captures all the information

about your yard at a speciﬁc location (e.g.,

your home).

Add ProﬁleCancel Save

Proﬁle Name

Using Zipcode

Using Map (US)

Locate Your Yardian (Country: US)

Please note that you can not change the

location more than 5 times per day.

19

Step 3.

4

Step

Pair your Yardian

to your proﬁle

Stop All Watering Activities

Unpaired

Please Cick To Pair.

Yardian Device Setting

°C | °F

Watering Schedule

: Smart Watering Day

: Manual Watering Day

: Skip Watering Day

F

81°

72°

W

79°

72°

T

81°

72°

S

81°

72°

M

82°

73°

S

81°

72°

T

82°

72°

My Yardian

Click the Yardian device setting card to

start pairing.

SN :

MAC :

YID :

AA00754F

20

Page is loading ...

Aeon Matrix YDN1602 User manual

This manual is also suitable for

Aeon Matrix YDN1602 User manual

Related papers

Other documents