OL-57
OCULENS
5x30mm / 8x20mm CLIP-ON
EYEGLASS MAGNIFIERS
Instructions for use:
Switching Lenses
Your magnifier set includes a 5x and 8x lens. To switch lenses, simply pull apart lens and clamp to remove lens
(Fig. 1). Snap desired lens in place on clamp (Fig. 2).
TM
Fig.
1
Cleaning Your Magnifier
Clean lenses with a soft, clean microfiber cloth by rubbing gently in a circular motion. Moisten the lens cloth
with water if needed. Do not use harsh chemicals, solvents or abrasives as they may damage the lens.
CAUTION - FIRE HAZARD:
Keep magnifier away from direct sunlight to prevent accidental fire.
Customer Service:
If you experience any difficulties, please contact us and we will be happy to help you.
In the U.S.A.
Phone: 1-631-963-5000
Email: [email protected]
In the U.K.
Phone: +44 (0) 1938 557440
Email: [email protected]
In the E.U.
Phone: +44 (0) 1938 557440
Email: [email protected]
For warranty information, visit www.carson.com/warranty
OL-57 / © 2020
Fig.
2
Fig. 3
Fig. 5Fig. 4
Using Your Magnifier
Position magnifier in front of eyeglass lens as desired (Fig. 6). Flip magnifier out of view when not in use (Fig. 7).
Place magnifier lenses and clamp inside included cloth pouch when not in use (Fig 8).
Fig.
6
Attaching to Glasses
Pinch middle portion of clamp to open (Fig. 3). Place clamp around bridge of glasses (Fig. 4) and release clamp
when in place (Fig. 5).
Fig.
7
Fig. 8
/
