QUICK START GUIDE

This is a fully plug and play device. Simply insert the USB portion of the pen to any USB slot on your PC. Wait

several seconds for your computer to recognize it. When removing your HD camcorder pen from the USB

remember to always right click on the device and select eject.

Charging

Please charge the HD Camcorder pen about 4 hours using the supplied cable and AC adapter or by inserting the

USB part of the pen into a USB port on your computer.

Photo taking Mode

Flip the switch to the RIGHT position and press the top button for 2 seconds. During start up the LED will shine

yellow/blue and then solid yellow. At this point the top button can be pressed to take pictures. The indicator LED

with flash blue and then back to yellow indicating that a picture has been taken. Press again to take another

picture or press and hold to exit picture taking.

Recording Audio

Flip the switch to the RIGHT position and press the top button for 2 seconds to turn the unit on. The LED will shine

yellow/blue then flash yellow twice to indicate that audio recording has begun. To stop Audio recording press the