Eiki EK-830 User manual

Owner's Manual

Multimedia Projector

EK-830 SERIES

EK-836DU, EK-833DU, EK-831DU,

EK-831U, EK-830U

■

Read this Owner′s Manual carefully before using the projector, and keep it for

future reference.

■

The pictures for On Screen Display menus and the projector in this guide may

slightly vary from the actual design.

■

The contents of this Owner′s Manual are subject to change without notice.

Contents

3

Usage Notice

.................................4

Safety Information ................................... 4

Safety Labels of This Machine

................ 6

Regulation & Safety Notices

.................14

Other Information

..................................18

Introduction .................................19

Product Features ...................................19

Package Overview

................................20

Product Overview

.................................. 21

Connection Ports .................................... 22

Control Panel

.......................................... 23

Remote Control ..................................... 25

Remote Control Battery Installation ........ 28

Remote Control Operating Range

.......... 29

Basic Operations ........................30

Installing the Projection Lens ................30

Removing the Projection Lens

..............30

Using the Projector in Portrait Mode

.....31

Connecting the Projector

.......................32

Connecting to Computer/Notebook/AV

Equipment/Other Devices ....................... 32

Connecting to HDBaseT Module

............ 33

Powering On/Off the Projector ..............34

Powering On the Projector ...................... 34

Powering Off the Projector

...................... 35

Adjusting the Projected Image ..............36

Adjusting the Position of Projector

Image ...................................................... 36

Adjusting the Projector Zoom and

Focus

...................................................... 36

Adjusting the Lens Position

..................... 36

Adjusting Projection Image Size

............. 37

User Settings ..............................42

Using the On Screen Display (OSD) .....42

How to Operate ....................................... 42

Image Adjustment

................................... 43

Display Settings

...................................... 46

Default Settings

....................................... 50

Options

.................................................... 53

OSD Menu Tree ....................................55

LAN Control ................................58

Wired LAN Terminal Functionalities

..............................................................58

Supported External Devices ................... 58

Controlling this Device with Web

Browser

.................................................59

Connecting to the Device ........................ 59

Crestron

.................................................. 59

Crestron Tools

......................................... 60

Crestron Info

........................................... 60

Troubleshooting .........................61

Appendices

................................. 67

List of Compatible Signals .....................67

Congurations of Terminals

..................67

Terminal: Computer In (Mini D-sub 15 pin)

[Monitor Out] ........................................... 73

Terminal: PC Control (D-sub 9 pin) (male)

................................................................ 73

Terminal: 3D Sync

................................... 74

Terminal: 12V Trigger Out

....................... 74

Terminal: Wired Remote In/Out............... 74

Specications ........................................ 75

Cabinet Dimensions

.............................. 76

Trademarks

...........................................77

Usage Notice

4

FOR EU USERS

The symbol mark and recycling systems described

below apply to EU countries and do not apply to

countries in other areas of the world.

Your product is designed and manufactured with

high quality materials and components which can

be recycled and/or reused. The symbol mark means

that electrical and electronic equipment, batteries

and accumulators, at their end-of-life, should be

disposed of separately from your household waste.

Note:

If a chemical symbol is printed beneath the symbol

mark, this chemical symbol means that the battery

or accumulator contains a heavy metal at a certain

concentration. This will be indicated as follows:

Hg: mercury, Cd: cadmium, Pb: lead

In the European Union there are

separate collection systems for used

electrical and electronic equipment,

batteries and accumulators.

Please, dispose of them correctly

at your local community waste

collection/recycling centre.

Please help us to conserve the environment we live

in!

Symbols Used

Important Safety Information

Important:

It is strongly recommended that you read this

section carefully before using the projector. These

safety and usage instructions will ensure that you

enjoy many years of safe use of the projector.

Keep this manual for future reference.

Note:

Provides additional information on the topic at hand.

Important:

Provides additional information that should not be

overlooked.

Caution:

Alerts you to situations that may damage the unit.

Caution:

To reduce the risk of electric shock, do not remove

cover (or back), no user serviceable parts inside

except lamp replacement. Refer servicing to

qualied service personnel.

Caution:

ELECTRIC SHOCK DO NOT OPEN

This symbol indicates that dangerous

voltage constituting a risk of electric shock

is present within this unit.

This symbol indicates that there are

important operating and maintenance

instructions in the user’s manual with this

unit.

Warning:

Alerts you to situations that may damage the unit,

create a hazardous environment, or cause personal

injury.

Warning symbols are used on the unit and in this

manual to alert you of hazardous situations. The

following styles are used in this manual to alert you to

important information.

¾

Do not open the unit case. Aside from the lter,

there are no user-serviceable parts in the unit. For

servicing, contact qualied service personnel.

¾

Follow all warnings and cautions in this manual and

on the unit case.

¾

This projector has built-in laser module. Hazardous

optical radiation possibly emits from this product. Do

not stare into the beam which may be harmful to the

eyes.

¾

Do not place the unit on an unstable surface, cart,

or stand.

¾

Avoid using the system near water, in direct

sunlight, or near a heating device.

¾

Do not place heavy objects such as books or bags

on the unit.

• Please read this manual completely before installing

and operating the projector.

• The projector provides many convenient features

and functions. Proper operation may enable you

to fully utilize the features and keep it in good

condition. Otherwise, it will not only shorten

the service life of the unit, but also may cause

malfunction, a re, or other accidents.

• If your projector cannot work properly, please read

this manual again, check the operating methods and

cable connection, and try the solutions in the part of

Troubleshooting. If the problem still exists, contact

the dealer or the service center.

Safety Precautions

Caution:

• The projector must be grounded.

• Do not expose the projector to raindrops or high

humidity to avoid a re or electric shock.

• This projector produces intense light from the

projection lens. Avoid staring directly into the

lens, otherwise eye damage could be caused. Be

especially careful that children do not stare directly

into the beam.

General Safety Information

Safety Instructions

Usage Notice

5

• Place the projector in a proper position. Otherwise it

may result in re hazard.

• Leave an appropriate space from the top, sides, and

back of the shell in order to ventilate and cool down

the projector. See Owner’s manual for the minimum

distance to be left each side. It must be satised if

the projector is placed in sealed environment like a

cabinet.

> 50 cm

(> 19.7”)

> 30 cm

(> 11.8”)

> 50 cm

(> 19.7”)

> 0 cm

(> 0”)

> 0 cm

(> 0”)

• Do not cover the vent of the projector. Poor radiation

may shorten the service life or even cause dangers.

• Remove the AC power plug if the projector is not to

be used for a long time.

Caution:

• Do not set the projector in greasy, wet, or smoky

conditions such as in a kitchen, to prevent a

malfunction or accident. If the projector comes

in contact with oil or chemicals, it may become

deteriorated.

• Read and keep this manual for future reference.

• The mains plug/appliance coupler is used as

disconnect device, the disconnect device shall

remain readily operable.

• Read all of the instructions given here and retain

them for later use. Unplug this projector from AC

power supply before cleaning. Do not use liquid or

aerosol cleaners.

• Use a damp cloth for cleaning.

• Follow all warnings and instructions marked on the

projector.

• For added protection to the projector during a

lightning storm, or when it is left unattended and

unused for long periods of time, unplug it from the

wall outlet. This will prevent damage due to lightning

and power line surges.

• Do not expose this unit to rain or use near water...

for example, in a wet basement, near a swimming

pool, etc...

• Do not use attachments not recommended by the

manufacturer as they may cause hazards.

• Do not place this projector on an unstable

cart, stand, or table. The projector

may fall, causing serious

injury to a child or an adult,

and serious damage to the projector.

• Use only with a cart or stand

recommended by the manufacturer, or sold with

the projector. Wall or shelf mounting should follow

the manufacturer’s instructions, and should use a

mounting kit approved by the manufacturers.

• An appliance and cart combination should be

moved with care. Quick stops, excessive force, and

uneven surfaces may cause the appliance and cart

combination to overturn.

• Slots and openings in the back and bottom of

the cabinet are provided for ventilation, to ensure

reliable operation of the equipment and to protect it

from overheating.

• The openings should never be covered with cloth or

other materials, and the bottom opening should not

be blocked by placing the projector on a bed, sofa,

rug, or other similar surface. This projector should

never be placed near or over a radiator or heat

register.

• This projector should not be placed in a build-

in installation such as a book case unless proper

ventilation is provided.

• Never push objects of any kind into this projector

through cabinet slots as they may touch dangerous

voltage points or short out parts that could result in

a re or electric shock. Never spill liquid of any kind

on the projector.

• Do not install the projector near the ventilation duct

of air-conditioning equipment.

• This projector should be operated only from the type

of power source indicat-ed on the marking label.

• If you are not sure of the type of power supplied,

consult your authorized dealer or local power

company.

• Do not overload wall outlets and extension cords as

this can result in re or electric shock. Do not allow

anything to rest on the power cord. Do not locate

this projector where the cord may be damaged by

persons walking on it.

• Do not attempt to service this projector yourself

as opening or removing Covers may expose you

to dangerous voltage or other hazards. Refer all

servicing to qualied service personnel.

¾

Unplug this projector from wall outlet and refer

servicing to qualied service personnel under the

following conditions:

¾

When the power cord or plug is damaged or

frayed.

¾

If liquid has been spilled into the projector.

¾

If the projector has been exposed to rain or water.

¾

If the projector does not operate normally by

following the operating instructions. Adjust only

those controls that are covered by the operating

instructions as improper adjustment of other

controls may result in damage and will often

require extensive work by a qualied technician to

restore the projector to normal operation.

¾

If the projector has been dropped or the cabinet

has been damaged.

• When the projector exhibits a distinct change in

performance - this indicates a need for service.

• When replacement parts are required, be sure the

service technician has used replacement parts

specied by the manufacturer that have the same

characteristics as the original part. Unauthorized

substitutions may result in re, electric shock, or

injury to persons.

Safety Guide

Usage Notice

6

Caution:

• Hot air is exhausted from the exhaust vent. When

using or installing the projector, the following

precautions should be taken.

• Do not put any ammable objects, or spray can

near the projector. Hot air is exhausted from the

air vents.

• Keep the exhaust vent at least 1m away from any

objects.

• Do not touch a peripheral part of the exhaust vent,

especially screws and metallic part. This area will

become hot while the projector is being used.

• Do not put anything on the projector. Objects put

on the cabinet will not only get damaged but also

may cause re hazard by heat.

• Cooling fans are provided to cool down the

projector.

• The fan’s running speed is changed according to

the temperature inside the projector.

Caution in ceiling installation the

projector

• Only qualied personal is authorized for ceiling

installation.

• We are not responsible for the hurt and damage

caused by ceiling brakect that purchased from

unauthorized dealer even in warranty period.

• Remove the ceiling bracket immediately while not

use.

• While installing, torque screwdriver is suggested,

don’t use electric or impact-type screwdriver.

• Please read the manual of bracket for details.

• Please read the Owner’s Manual, and conrm

screw size and location of screw holes on the

projector

• The bracket is subject to change without notice.

Caution in moving or transporting the

projector

• Do not drop or bump the projector, otherwise

damages or malfunctions may result.

• When carrying the projector, use a suitable

carrying case.

• Do not transport the projector by courier or any

other transport service in an unsuitable transport

case. This may cause damage to the projector.

Information for users in the European Union

This is a device to project images onto a screen,

etc., and is not intended for use as indoor lighting in

a domestic environment. Directive 2009/125/EC.

Warning:

Do not aim a laser pointer at the lens apearture,

which may damage the DMD in the projector and

cause personal injury.

We are not responsible for the hurt and damage

caused by the improper use of laser pointer even in

warranty periond.

Vents in the cabinet are provided for ventilation. To

ensure reliable operation of the product and to protect

it from overheating, these openings must not be

blocked or covered.

When moving the projector, take care of the lens and

retract the adjustable foot to prevent damage to the

lens and cabinet.

Safety Labels of This machine

Laser Notice

This Product is classied as Class 3R of IEC60825-

1:2007 and also complies with 21 CFR 1040.10 and

1040.11 except for deviations pursuant to Laser Notice

No.50, dated June 24, 2007.

Usage Notice

IEC 60825-1:2014: CLASS 1 LASER PRODUCT -

RISK GROUP 2

Wavelength:

449-461 nm

Pulse duration:

1.66 ms

Max. output:

98 mW

Laser emission

port

Air circulation

Moving the projector

For information about transporting the projector

by courier or any other transport service, consult

your dealer.

• Do not put the projector in a case before it is

cooled enough.

• Upon completion of any service or repairs to this

projector, ask the service technician to perform

routine safety checks to determine that the projector

is in safe operating condition.

Usage Notice

7

1. Do not look into the lens while the light source

is on. The strong light from the light source

may cause damage to your eyesight. RG2 IEC

62471-5:2015

2. Do not place anything in front of the lens while

the projector is operating. Things placed in front

of the lens may overheat and burn or start a

re. If you want to temporarily stop the projected

image, use the Blank key on the remote control.

3. Do not remove any screws. Do not block or

cover the vents.

4. Do not look into the lens. (For USA and Canada

only).

5. Laser aperture warning: (For USA and Canada

only).

• CLASS 3R LASER PRODUCT-AVOID DIRECT

EYE EXPOSURE

• Do not look into the light source using optical

instruments (such as magnifying glasses and

mirrors). Visual impairment could result.

• When turning on the projector, make sure no

one within projection range is looking at the

lens.

Usage Notice

• Keep any items (magnifying glass etc.) out of

the light path of the projector. The light path

being projected from the lens is extensive,

therefore any kind of abnormal objects that can

redirect light coming out of the lens, can cause

an unpredictable outcome such as a re or

injury to the eyes.

6. Laser aperture warning: (For other countries).

• CLASS 1 LASER PRODUCT - RISK GROUP 2

• Do not stare into the beam, maybe harmful to

the eyes.

7. Risk group 3: (Except USA and Canada)

This projector may become RG3 when an

interchangeable lens with throw ratio greater

than the number stated on the label.

• As with any bright light source, do not stare into

the beam. RG2 IEC 62471-5:2015

• No direct exposure to the beam shall be

permitted. RG3 IEC 62471-5:2015

• Operators shall control access to the beam

within the hazard distance or install the product

at the height that will prevent spectators’ eyes

from being in the hazard distance.

• Hazard distance

RG2

RG3

Hazard distance

RG3

RG2

Description

Throw

Ratio

Hazard

Distance

IEC62471-

5:2015

AH-AC25020

Lens Type R0

Ultra Short

Throw Lens

0.377 NA RG2

AH-AC22060

Lens Type R1

Ultra Short

Throw Zoom

Lens

0.76–0.95 NA RG2

AH-AC22070

Lens Type R2

Short Throw

Zoom Lens

1.14–1.71 NA RG2

AH-AC21020

Lens Type R3

Standard

Zoom Lens

1.61–2.42 NA RG2

AH-AC24020

Lens Type R4

Middle

Throw Zoom

Lens

2.37–3.60 NA RG2

AH-AC23020

Lens Type R5

Long Throw

Zoom Lens

3.53–5.65 1550 mm RG3

AH-AC23030

Lens Type R6

Ultra Long

Throw Zoom

Lens

5.52–8.83 1370 mm RG3

• Cinema projectors that have a hazard

distance greater than 1 m and emit light into

an uncontrolled area where persons may be

present should be positioned in accordance

with “the xed projector installation” parameters,

resulting in a hazard distance that does not

extend into the audience area unless the beam

is at least 2 m above the oor level.

• In non-cinema, environments where

unrestrained behavior is reasonably

foreseeable, the minimum separation height

should be greater than or equal to 3.0 m to

prevent potential exposure, for example by

an individual sitting on another individual’s

shoulders, within the hazard distance. For

example, a sufciently large separation height

may be achieved by mounting the projector

on the ceiling or through the use of physical

barriers.

Usage Notice

8

Safety Labels

Usage Notice

9

Compliance

FCC Caution

Note: This equipment has been tested and found

to comply with the limits for a Class* digital device,

pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against

harmful interference in a residential installation. This

equipment generates, uses, and can radiate radio

frequency energy, and if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there

is no guarantee that interference will not occur in a

particular installation. If this equipment does cause

harmful interference to radio or television reception,

which can be determined by turning the equipment

off and on, the user is encouraged to try to correct

the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and

receiver.

• Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV

technician for help

Use of shielded cable is required to comply with

Class* limits in Subpart B of Part 15 of FCC Rules.

* See the rating label on the projector if class A or B.

Do not make any changes or modications to

the equipment unless otherwise specied in the

instructions. If such changes or modications should

be made, you could be required to stop operation of

the equipment.

Trade Name : EIKI

Responsible party : EIKI International, Inc.

Address : 30251 Esperanza Rancho Santa Margarita

CA 92688-2132

Telephone No. : 800-242-3454 (949-457-0200)

Canadian Radio Interference Regulations:

This digital appraratus meets all requirements of

the Canadian ICES-003.

* See the rating label on the projector if class A or B.

Warning:

A plug with bared exible cord is hazardous if

engaged in a live socket outlet.

Warning:

This apparatus must be earthed.

The socket-outlet should be installed near the

equipment and easily accessible.

AC Power Cord Requirement

The AC Power Cord supplied with this projector meets

the requirement for use in the country you purchased

it.

AC Power Cord for the United States and Canada:

AC Power Cord used in the United States and Canada

is listed by the Under-writers Laboratories (UL) and

certied by the Canadian Standard Association (CSA).

AC Power Cord has a grounding-type AC line

plug.

This is a safety feature to be sure that the plug will t

into the power outlet. Do not try to defeat this safety

feature. Should you be unable to insert the plug into

the outlet, contact your electrician.

AC Power Cord for the United Kingdom:

This cord is already tted with a moulded plug

incorporating a fuse, the value of which is indicated

on the pin face of the plug. Should the fuse need to

be replaced, an ASTA approved BS 1362 fuse must

be used of the same rating, marked thus

. If the

fuse cover is detachable, never use the plug with the

cover omitted. If a replacement fuse cover is required,

ensure it is of the same colour as that visible on the

pin face of the plug (i.e. red or orange). Fuse covers

are available from the Parts Department indicated in

your User Instructions.

If the plug supplied is not suitable for your socket

outlet, it should be cut off and destroyed. The end of

the exible cord should be suitably prepared and the

correct plug tted.

The Wires in this mains lead are coloured in

accordance with the following code:

• Green-and-yellow ......... Earth

• Blue .............................. Neutral

• Brown ........................... Live

As the colours of the wires in the mains lead of this

apparatus may not correspond with the coloured

markings identifying the terminals in your plug

proceed as follows:

• The wire which is coloured green-and-yellow must

be connected to the terminal in the plug which is

marked by the letter E or by the safety earth symbol

or coloured green or green-and-yellow.

• The wire which is coloured blue must be connected

to the terminal which is marked with the letter N or

coloured black.

• The wire which is coloured brown must be

connected to the terminal which is marked with the

letter L or coloured red.

Usage Notice

10

ABOUT THE LASER LIGHT SOURCE

■

Warning-

Do not look into the lens or vent when the product

is on. The bright light may damage your eyes. Be

especially careful in an environment with children.

■

Caution-

This projector has built-in laser module. Hazardous

optical radiation possibly emits from this product. Do

not stare into the beam which may be harmful to the

eyes.

■

Caution-

Use of controls or adjustments or performance of

procedures other than those specied herein may

result in hazardous radiation exposure.

■

Caution-

Do not block the projection light when it is on. If you

do so, the part that is blocking the projection light

may get quite hot and deform, deteriorate or cause

a burn or re. The reected light may make the

lens hot and cause a product failure. To temporarily

suspend projection, select the Blank function. To

suspend longer, turn off the product.

■

Caution-

Leave 30 cm or over space between the projectors

when projectors are installed side by side.

> 50 cm

(> 19.7”)

> 30 cm

(> 11.8”)

> 50 cm

(> 19.7”)

> 0 cm

(> 0”)

> 0 cm

(> 0”)

Usage Notice

11

■

Caution-

For 360° installation, install the projector more than

50 cm away from the wall or the oor. When the

air intake and discharge outlet are obstructed, the

temperature inside the projector will rise and this

may result in a malfunction.

> 50 cm

(> 19.7”)

> 50 cm

(> 19.7”)

> 0 cm

(> 0”)

> 0 cm

(> 0”)

■

Caution-

When installing the projector on the right side, leave

a space of at least 50 cm between the exhaust vent

and the wall and a space of at least 50 cm for the

intake vent.

Wall

Floor

> 50 cm

(> 19.7”)

> 50 cm

(> 19.7”)

> 0 cm

(> 0”)

> 0 cm

(> 0”)

Usage Notice

12

■

Caution-

When installing the projector on the left side, leave

a space of at least 50 cm between the exhaust vent

and the wall and a space of at least 50 cm for the

intake vent.

Wall

> 50 cm

(> 19.7”)

> 50 cm

(> 19.7”)

> 0 cm

(> 0”)

> 0 cm

(> 0”)

Floor

■

Caution-

Do not pile up more than 3 projectors.

Usage Notice

13

REMOTE CONTROL BATTERY

Warning

• Never throw batteries into a re.

Using the batteries improperly may cause them to explode or leak

and may result in serious injury. If battery-leaking uid contacts skin,

wash the uid off immediately with clean water and consult a doctor.

If the uid spills on an instrument, avoid contact and wipe it off using

tissue paper. Then dispose of the used tissue paper as ammable

garbage after moistening the tissue with water.

• Keep new and used batteries away from children.

If the battery compartment does not close securely, stop using the

product and keep it away from children. If you think batteries might

have been swallowed or placed inside any part of the body, seek

immediate medical attention.

Notes

• Use the recommended battery type.

• Dispose of batteries in a designated disposal area.

• Attention should be drawn to the environmental aspects of battery

disposal.

• If the remote control does not operate correctly, or if the operating

range becomes reduced, replace the batteries.

• Avoid contact with water or liquid.

• Do not expose the remote control to moisture or heat.

• Do not drop the remote control.

• If the batteries have leaked in the remote control, carefully wipe

the case clean and install new batteries.

• Dispose of used batteries according to the instructions.

• The remote control may fail to operate if the infrared remote sensor

is exposed to bright sunlight or uorescent lighting.

Important:

Contents of this manual are subject to change without prior notice. In no

event will the company be liable for direct, indirect, special, incidental, or

consequential damages as a result of handing or operating this product.

Usage Notice

14

Regulation & Safety Notices

This appendix lists the general notices of your Projector.

Notice: Users in the United States of

America FCC notice

MODEL NAME: EK-830 series

TRADE NAME: EIKI

MODEL NAME: EK-830 series

Tested To Comply With FCC Standards

FOR COMMERCIAL OR OFFICE USE

This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions:

1. This device may not cause harmful interference and

2. This device must accept any interference received, including

interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits

for a Class A digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with

the instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area

is likely to cause harmful interference in which case the user will be

required to correct the interference at his own expense.

Caution: Changes or modications not expressly approved by the

party responsible for compliance could void the user’s authority to

operate the equipment.

RESPONSIBLE PARTY: EIKI International, Inc.

30251 Esperanza Rancho Santa Margarita CA 92688-2132

Phone: 800-242-3454 (949-457-0200)

Usage Notice

15

Notice: Shielded cables

All connections to other computing devices must be made using

shielded cables to maintain compliance with FCC regulations.

Caution

Changes or modications not expressly approved by the

manufacturer could void the user’s authority, which is granted by the

Federal Communications Commission, to operate this projector.

Notes to Users in the State of California

Perchlorate Material - special handling may apply. See www.dtsc.

ca.gov/hazardouswaste/perchlorate.

Declaration of Conformity for EU

countries

■

EMC Directive 2014/30/EU (including amendments)

■

Low Voltage Directive 2014/35/EU

Warning

This equipment is compliant with Class A of CISPR 32. In a residential

environment this equipment may cause radio interference.

Notice: Users in EU countries

CE Marking Traceability Information (For

EU Countries Only)

Usage Notice

16

User Information on Electrical and

Electronic Equipment

Users in the countries where this symbol shown in this section has

been specied in national law on collection and treatment of E-waste.

Our Products contain high quality components and are designed to

facilitate recycling. Our products or product packaging are marked

with the symbol below.

This product contains substances which are harmful to humans and

the environment.

The symbol indicates that the product must not be treated as

municipal waste. It must be disposed of separately via the appropriate

return and collection systems available. By following these

instructions you ensure that this product is treated correctly and help

to reduce potential impacts on the environment and human health,

which could otherwise result from inappropriate handling.

Recycling of products helps to conserve natural resources and protect

the environment.

For more detailed information on collection and recycling systems for

this product, please contact the shop where you purchased it, your

local dealer or sales/service representatives.

Notice: Users in Turkey

AEEE Yönetmeliğine Uygundur.

Bu sistem sarf malzemeleri ve yedek parçaları da dahil olmak üzere

AEEE Yönetmeliğine Uygundur.

Usage Notice

17

Notice: Users in the EU

Note for the Battery and/or Accumulator

Symbol

In accordance with the Battery Directive 2006/66/EC Article 20

Information for end-users Annex II, the above symbol is printed on

batteries and accumulators. This symbol means that in the European

Union, used batteries and accumulators should be disposed of

separately from your household waste. In the EU, there are separate

collection systems for not only used electrical and electronic products

but also batteries and accumulators. Please dispose of them correctly

at your local community waste collection/recycling centre.

Usage Notice

18

Other Information

Copyrights to Images

When projecting images using the projector, be careful not to infringe

the copyright of protected materials.

The following are examples that may infringe the copyright of

protected materials.

• Broadcasting images or movies for commercial purposes

• Modifying images or movies using functions such as freeze,

magnify, or zoom to broadcast images for commercial purposes or

public viewing

• Varying the aspect ratio of images or movies using a function

that changes the screen size to broadcast images for commercial

purposes or public viewing

Note to Users Viewing 3D Images

Pay attention to the following points when viewing images using 3D

glasses with projector:

• How 3D images are viewed may vary according to the individual.

• Do not use 3D glasses for viewing any material other than 3D

images.

• Before viewing 3D images, make sure to read the manuals

provided with your 3D glasses and 3D compatible content.

• Avoid viewing 3D images for a long period of time. Take a break of

15 minutes or longer after every hour of viewing.

• If you feel sick while viewing 3D images, stop viewing them. If you

continue to feel sick, consult a doctor.

• When viewing 3D image in a room where LED lighting system or

uorescent lights are used, you may feel that the light in the room

ickers. If this is the case, dim the lights until you do not notice any

ickers, or turn off the lights.

• If you or any member of your family has a history of lightsensitive

seizures, consult a doctor before viewing 3D images.

Introduction

19

Introduction

Product Features

Outstanding features include:

■

Native 1920 x 1200 WUXGA resolution with Auto/4:3/16:9/16:10/1.

88:1/2.35:1 aspect ratio supported

■

3D function with Blu-Ray 3D supported for projecting 3D content

using DLP Link Technology

■

High brightness and contrast ratio

■

Various picture modes

■

NTSC/PAL/SECAM and HDTV (720p, 1080i, 1080p) compatibility

■

Economy (ECO) mode for extending light source life

■

Advanced keystone correction for delivering optimum presentations

■

User friendly multilingual On Screen Display

■

Extensive lens options with motorized focus/zoom and motorized

lens shift functions

■

LAN function for remote management on the projectors from a web

browser

■

Compatibility with PJ-Link, Crestron, AMX, and Extron

■

Compatibility with 3D VESA standards

Introduction

20

Package Overview

This projector comes with all the items shown below. Check to

make sure your unit is complete. Contact your dealer immediately if

anything is missing

.

(Projection Lens is optional)

ON

OFF

Input

Projector Remote Control (with Batteries)

Quick Start Guide Power Cord (EU and US type)

Safety Information VGA cable

Page is loading ...

Eiki EK-830 User manual

This manual is also suitable for

Eiki EK-830 User manual

Related papers

Other documents